Assessing the cost of transfer inconvenience in public transport systems: A case study of the London Underground

Few studies have adequately assessed the cost of transfers² in public transport systems, or provided useful guidance on transfer improvements, such as where to invest (which facility), how to invest (which aspect), and how much to invest (quantitative justification of the investment). This paper proposes a new method based on path choice,³ taking into account both the operator’s service supply and the customers’ subjective perceptions to assess transfer cost and to identify ways to reduce it. This method evaluates different transfer components (e.g., transfer walking, waiting, and penalty) with distinct policy solutions and differentiates between transfer stations and movements.The method is applied to one of the largest and most complex public transport systems in the world, the London Underground (LUL), with a focus on 17 major transfer stations and 303 transfer movements. This study confirms that transfers pose a significant cost to LUL, and that cost is distributed unevenly across stations and across platforms at a station. Transfer stations are perceived very differently by passengers in terms of their overall cost and composition. The case study suggests that a better understanding of transfer behavior and improvements to the transfer experience could significantly benefit public transport systems.     

炎热天气对钢渣混凝土抗压强度的影响

将普通混凝土和钢渣质量分数为10％、30％和50％的混凝土试件分别放入40℃、50℃和60℃的热水中,测试了不同龄期试件的抗压强度和超声波脉冲速度,分析了炎热天气对钢渣混凝土抗压强度的影响.分析结果表明:在测试龄期内,各混凝土试件的抗压强度并不随着炎热天气的影响而发生削减;钢渣混凝土试件在第90 d达到最高抗压强度61...     

基于纸纤维改性的隧道工程透水砂浆性能研究北大核心CSCD

为提出一种适用于隧道初期支护基面找平并且具有一定透水性能的砂浆,将纸纤维加入砂浆试块中对其性能进行改性。通过分析纸纤维的降解原理,并将不同掺量的纸纤维加入砂浆试块中,对其体积密度、吸水率、抗压强度等基本性能指标及微观结构进行测试和分析。由试验结果可知:在碱性环境中,纸纤维具有可降解的性能特点;纸纤维可以使普通砂浆试块的吸水率提升2~3倍,同时也会造成砂浆试块的体积密度和抗压强度降低;对砂浆试块吸水率和抗压强度进行线性拟合后发现其吸水率和抗压强度呈现负相关关系。研究结果表明,通过纸纤维对砂浆进行透水性能的提升是可行的,但是纸纤维掺量对砂浆其他性能的影响还有待进一步研究。     

The implications of MARPOL Annex V on the management of ports and coastal communities

Abstract

The passage of the Marine Plastics Pollution Research and Control Act of 1987 (MPPRCA), which codified Annex V of the International Convention for the Prevention of Pollution from Ships (MARPOL), has encompassed every commercial and recreational shipping and boating facility in the United States. As a group, these ports, harbors, and marinas form a significant, although proportionately small, portion of the coastline of the country. More important, the economic benefits derived from the complex shoreside infrastructures required for international ocean trade, commercial and recreational fishing, and pleasure boating indicate just how critical it is for these facilities to be in conformance with effective and prudent coastal zone and environmental management practices.     

Finite element modeling of suction anchors under combined loading

Suction anchors are subjected to inclined, quasi-horizontal or quasi-vertical loadings. The type of the structure and depth of water govern the inclination of the load. Under this load condition, suction anchor experiences a combination of horizontal and vertical translations, and rotation. Therefore the soil's reaction to this load condition can be idealized as horizontal and vertical loadings, together with a moment. The magnitude and combination of the reactions depend on the load inclination, soil property and the point at which the load is applied. The behavior of the suction anchor subjected to the combined V–H-M loading is elaborated in this paper. This is to observe the effects of soil properties on the failure mechanism and ultimate capacity of the foundation. This was achieved by applying the pure horizontal and vertical displacements, and rotation and their combinations to the foundation, on V–H, V-M and H-M spaces and the yield-locus created for each space. The general purpose finite element program DIANA was used for this study. Non-linear analysis was conducted using a simplified elastic-perfectly-plastic model with Von-Mises yield criterion for saturated and consolidated clay.     

Incorporating Driver Behaviors in Network Design Problems: Challenges and Opportunities

The goal of a network design problem (NDP) is to make optimal decisions to achieve a certain objective such as minimizing total travel time or maximizing tolls collected in the network. A critical component to NDP is how travelers make their route choices. Researchers in transportation have adopted human decision theories to describe more accurate route choice behaviors. In this paper, we review the NDP with various route choice models: the random utility model (RUM), random regret-minimization (RRM) model, bounded rationality (BR), cumulative prospect theory (CPT), the fuzzy logic model (FLM) and dynamic learning models. Moreover, we identify challenges in applying behavioral route choice models to NDP and opportunities for future research.     

Non‐compatible chemicals as cargoes in industry,on road,rail, and water

Toronto is to have an urban transit system with a passenger carrying capacity which fills the gap between the capacity of the subway and the capacity of the car and bus. Correspondingly, in the words of the Premier of Ontario, the system will “make possible an attractive alternative to high‐rise, high‐density living and urban sprawl. . . .” Furthermore, the new system is sufficiently economical to provide “. . . an encouragement to growth in appropriate areas, rather than merely responding to growth as it occurs . . .”

The decision to have such a system is the culmination of some years of major transportation activities in the Province, which included the Metropolitan Toronto and Region Transportation Study (MTARTS) of 1962. This study pursued both urban expressways and public transport solutions to the movement of people in Metropolitan Toronto.

The urban expressways programmes ran into difficulties, on environmental terms, when strong opposition from community groups was met on proposed routes. A climax came when the Ontario Government halted the construction of the controversial Spadina expressway in June 1971. However, the programmes of public transport solutions met with great success. The Toronto subway and its extensions, together with the change in land values along the route, has become a classic success story. So, too, has the introduction of the GO Train Service (Government of Ontario train service). This pioneered a combination of commuter rail service and integrated feeder buses and today replaces some 14,000 cars each day along the lakeshore highways.

The success of the subway and the GO train coupled with the difficulties experienced by the urban expressways programme, gave rise to the realisation that a better city through public transport rather than the car, was practicable. However, subways were too expensive and they needed a large patronage in a narrow corridor. Accordingly, an intermediate capacity transit system was sought.

The paper describes the programme of activities involved in the choice of the system and describes the technical specification which the system will enjoy. In particular, the demonstration installation which is to be set‐up in Toronto is described in detail, together with the plans to instal some 56 miles over five routes in Metropolitan Toronto.     

The problems of hydrocarbon extraction

The problems associated with hydrocarbon extraction in the EEZ are discussed under the headings of resources and environment, technology and the industrial structure, government management, decision-making, and policy formulation. Policy areas identified include boundary delimitation relative to resources, environment and technology, co-ordination and decision-making machinery, relationships with UK and EEC energy policies, and regional planning of the sea and coastal areas used by the off-shore industry.