Design of power split transmission: Design of dual mode power split transmission

The power split type hybrid system transmits engine power by dividing it into the electrical unit and the mechanical unit. Its power transmission efficiency is highest at the mechanical point (MP), where the full power is transmitted to the mechanical unit. In this study, the equation for the MP was derived for the gear ratios of a general 4-node lever model. The MP characteristics for the transmission ratio (TR) of the input split and compound split structures were examined using the equation derived. Using the examined input split and compound split structures, a systematic design method for the dual mode power split transmission was proposed. In the dual mode power split transmission, the MP could be positioned at the desired TR, and the input split and compound split modes could be selectively used according to the clutch combination, which leads to the operation of the vehicle within a high system efficiency range.     

Effects of injection parameters on the spray characteristics of swirl and slit injectors using the Mie-scattering method

We investigated the effects of injection parameters such as injection pressure, ambient pressure, and ambient temperature on spray characteristics. We calculated the turbulence occurring point (t _c ), defined as the time required to generate a vortex, and the deceleration point (t _b ), defined as the time when spray penetration begins to decelerate, to elucidate the breakup mechanism of the test injectors. The spray velocity coefficient (C_v) was obtained to evaluate the spray characteristics. As the ambient pressure increases in the case of a slit injector, C_v decreases. We investigated the effects of nozzle tip shape according to injection pressure, ambient pressure, and fuel properties on spray characteristics and provide a C_v value of 0.38 for the swirl injector with a spray angle of 60° and the slit injector under atmospheric conditions. The value of C_v in the case of a slit injector was reduced by increasing the ambient pressure. Our results suggest that C_v of a swirl injector is constant regardless of changes in ambient pressure, injection pressure, and fuel properties. On the other hand, C_v of a slit injector is altered by changes in ambient pressure.     

Design and implementation of a UPnP-can gateway for automotive environments

In this paper, we propose a universal plug and play (UPnP) — controller area network (CAN) gateway system using UPnP middleware for interoperability between external smart devices and an in-vehicle network. The proposed gateway consists of a UPnP communication device, a CAN communication device, and a device translator layer. In-vehicle devices are not usually IP-based, so we implemented an in-vehicle device manager in the UPnP communication device which is in the gateway. We developed a vehicle simulator to produce real vehicular data for performance analysis. The CAN communication device transmits and receives real-time vehicle data between the real vehicular simulator and external devices through the UPnP. The device translator layer configures a message frame for enabling seamless data input and output between the CAN and UPnP protocols. After implementation, we generated an internal-external service request and tested the result. Finally, we confirmed the service request and operation between external devices and the internal vehicular device. Additionally, for a variety of external device numbers and communication environments, we demonstrated the gateway performance by measuring the round trip time (RTT) for overall service implementation.     

Hydroplaning simulation of a tire in thin water using fem and an estimation method and its application to skid number estimation

To simulate the hydroplaning of a tire, many analytical studies have been performed using commercial explicit FE (Finite Element) codes such as MSC.DYTRAN and LS-DYNA. However, most previous studies on this subject have addressed simulation of hydroplaning for water more than 5 mm deep. Additionally, because a great number of Eulerian elements and Lagrangian elements are typically used to analyze hydroplaning and because multiple analyses should be performed for various water depths, long CPU times are required. In this study, it was found that the traction force and the lift and drag forces between the tire and the road surface could be easily estimated for water shallower than 5 mm using an exponential function based on tire rolling FE simulation results. Furthermore, changes in skid resistance, expressed as SN (skid number), could be estimated for various water depths and vehicle speeds using the method proposed in this study, and the results were proven to be in good agreement with results obtained using the ASTM E274 Pavement Friction Tester.     

Design and implementation of a new clamping force estimator in Electro-Mechanical Brake systems

In this paper, an improved clamping force estimator is proposed for Electro-Mechanical Brake (EMB) systems by using the motor rotor position information and the hysteresis characteristics of mechanical parts in the EMB. A cascaded type of a force/position control system with a force sensor or an estimator was designed and implemented to control the clamping force and to keep the clearance gap in EMB systems. The EMB Hardware-In-the-Loop-Simulation (HILS) results show that the proposed force estimator yields better estimation performance than the existing estimator and that the clamping force control system based on the estimator can be also used for the fault tolerant control of the system.     

Sustainable Governance of Norwegian Aquaculture and the Administrative Reform: Dilemmas and Challenges

This article discusses the impact of the Norwegian government's administrative reform on the management of the Norwegian aquaculture industry and coastal areas. The 2010 reform of government administration strengthened the County Councils’ role in issues of aquaculture at the expense of the regional offices of the Directorate of Fisheries. The aim of the reform was to increase self-governance through decentralization. However, international trends in coastal zone and marine resource management are moving in the opposite direction, aiming at more integrated and ecosystem-based approaches involving the management of larger, rather than smaller, geographic regions. This article examines the possible effects of this reform in light of the move from government to governance, and in the context of a broad policy shift toward a more integrated, ecosystem-based management (EBM) of the coastal zone. Based on insights from multi-level and coastal zone governance debates, we argue that an unintended consequence of the Norwegian administrative reform could be increased fragmentation of the aquaculture governance system, as well as a reduced capacity to implement EBM-related measures. At the same time, the reform might improve coastal zone planning, although a further step toward integrated coastal zone management (ICZM) would require a greater delegation of authority to the County Councils.     

Full scale ice sea trials of Korean ice breaking research vessel ‘Araon’ on the big floes near Antarctica

A speed sea trial was performed in the Amundsen Sea in February and March of 2012. The Korean ice breaking research vessel “Araon” was used to check speed performance on the big floes. Two of ice trial cases were carried out. We describe the time history of location, the engine power, and the revolutions per minute during the ice trial, and the trajectory of the ship. Additionally, the measured ice properties are considered and discussed. The ice trial results were analyzed according to variation in ice thicknesses, ice strength, propulsion power, and the speed level of the ship. Our analysis results are compared to model test results and ice trial results. A correction to the target ice thickness was used to compare the power and speed relation in the same ice thickness because it is easy to know the relative speed performance of the ship. The Hamburgische Schiffbau-Versuchs Anstalt method was applied for the correction. The speed of Araon in big floes was higher than the speed in level ice. The speed after the correction at 10 MW of power and 103 cm of ice thickness was 5.4 knots based on analysis results.     

Synchronized Production and Transportation Planning Using Subcontracted Vehicles in a Production-Distribution Network

Abstract

Effective management of interfaces between procurement, supply, production and distribution for higher efficiency in the supply chain is an important issue in global manufacturing, where the synchronization of production and transportation planning represents important savings in operational costs. This paper focuses on the synchronization of production planning and transportation planning in a production distribution network, where transportation is subcontracted to a professional transportation enterprise (PTE) for vehicle-hiring. Dynamic and flexible numbers of vehicles are used to cater for fast changing market demands. Thus, the number of vehicles to be hired is viewed from the planning point of view as an operational decision considered simultaneously with production and transportation planning. A mathematical model – SPTP/MTDS – for synchronized production and transportation planning under multiple times and direct shipping strategy (MTDS) is discussed, and a Lagrange relaxation decomposition-based two layer decision procedure (LRD-TLDP) is developed. By introducing artificial decision variables and Lagrange multipliers, SPTP/MTDS is decomposed into a production decision sub-problem (SPTP-PD), and a distribution decision sub-problem (SPTP-DD). A priority-based assignment heuristic and a partial chain-based genetic algorithm are developed to solve SPTP-PD and SPTP-DD, respectively. An illustration of the application of the model in an electronic appliance manufacturing enterprise in China is presented.