Model-based control system design in a urea-SCR aftertreatment system based on NH3 sensor feedback

This paper presents preliminary control system simulation results in a urea-selective catalytic reduction (SCR) aftertreatment system based on NH₃ sensor feedback. A four-state control-oriented lumped parameter model is used to analyze the controllability and observability properties of the urea-SCR plant. A model-based estimator is designed via simulation and a control system is developed with design based on a sliding mode control framework. The control system based on NH₃ sensor feedback is analyzed via simulation by comparing it to a control system developed based on NO_x sensor feedback. Simulation results show that the NH₃ sensor-based strategy performs very similarly in comparison to a NO_x sensor-based strategy. The control system performance metrics for NO_x index, urea index, urea usage, and NH₃ slip suggest that the NO_x sensor can be a potential alternative to a NO_x sensor for urea-SCR control applications.     

Belt routing and safety assessment through computer simulation

Most of the research on safety belt systems has involved crash simulation that only considered a dynamic human model. However, belt routing analysis, usually known as comfort level estimation, is also an important factor in safety belt design, considering that serious injuries of the abdominal region result from the infiltration of a belt into the neck or the chest. Thus, safety belt evaluations using kinematic human models are also needed. In this paper, a belt fit simulation method is suggested. Using the proposed process, both comfort and safety analyses can be performed under the same conditions continuously, and thus the safety belt design parameters, such as the location of anchor points, dummy posture and etc., can be evaluated. In conclusion, this computer process enables a belt system design to reduce injuries.     

Development of an intelligent CAE system for auto-body concept design

The concept design phase is a critical step in auto-body design, as it has a great effect on later design work. This paper describes the implementation of an auto-body structure design in the early stages of a new auto-body developing program. In order to reduce the long design period and analysis error that plagues traditional auto-body concept design, an intelligent CAE system has been successfully developed and implemented based on the UGS NX/API opening platform. This system, the so-called ACD-ICAE (Auto-body concept design-intelligent computer aided engineering) System that means concept design-intelligent computer aided engineering system, employs a fully parametrized template method to build the conceptual auto-body geometry model and FEM model quickly and easily. It also integrates auto-body modeling, analysis and optimization on only one CAD platform via a parametric variables database. Moreover, all parametric variables are shared and updated in different phases of the ACD-ICAE System. A wizard User Interface (UI) based on knowledge of auto-body engineering was developed and used in this system. The procedures implementing the functional diagram of the ACD-ICAE system are also provided. A typical example of a car body concept design with four doors shows that the ACD-ICAE system is efficient and accurate.     

Theoretical method for predicting the weight reduction rate of a box-type car body for rolling stock by material substitution design

In this paper, a theoretical approach is suggested for predicting the structural performances and weight reduction rate of a car body with a box-type section when its material is substituted with a lightweight material for weight saving. For the material substitution design of a car body for rolling stock, bending, axial, and twisting deformations should be considered at constant stiffness and strength conditions. To compare the weight reduction effects on different material applications, some new indices were derived from a structural performance point of view. The derived indices provide good measures to estimate weight reduction by material substitution design and can be effectively applied to the conceptual design of a car body.     

Grain refinement in bearing steels using a double-quenching heat-treatment process

A double-quenching (D/Q) process is proposed for heat-treating high carbon-chromium bearing steels to improve the fatigue properties through refinement of the microstructure. The new heat treatment method has two steps: The first step is a nitrocarburizing process that results in high surface hardness and lowers the transformation temperature. The second step is the same as in the conventional quenching process but can be conducted at a considerably lower temperature than in conventional quenching. The microstructure in the material that is caused by the D/Q heat treatment is much finer than in the conventional Q/T (quenching and tempering) process. In order to quantify the performance of the proposed heat-treatment process, various mechanical property tests are carried out. The rolling contact fatigue life of double-quenched bearing steels was eight times higher than in bearing steels that were treated by conventional Q/T.     

Dynamics of inorganic nutrient species in the Bohai seawaters

Within the frame of a Sino-German Joint Research Program, two cruises of “R/V Dong Fang Hong 2” were carried out in September–October 1998 and April–May 1999, respectively, to understand the dynamics of nutrients in the Bohai. Nutrient species (NO₃⁻, NO₂⁻, NH₄⁺, PO₄³⁻ and SiO₃²⁻) are determined colorimetrically on board for five anchor and 30 grid stations. In situ incubation experiments are performed to determine planktonic nutrient uptake and benthic exchange flux. Nutrient concentrations display short-term variability and seasonal change in the Bohai, with higher levels in shallow coastal waters than in the Central Bohai. The influence of riverine discharge on nutrient levels can be seen from salinity isopleths, nutrient distribution and species ratios. Near-bottom (nb) waters have similar nutrient concentrations as to the surface waters in the Central Bohai, whereas stratification takes place in the Bohai Strait and North Yellow Sea. In situ incubation experiments provide evidence that the uptake ratio (i.e. N, P) by phytoplankton is proportional to the ratios among nutrient species in ambient waters. Based on the data of this study and previously publications, a preliminary estimate of nutrient budgets via riverine input and atmospheric deposition is established. The results indicate that atmospheric deposition gains importance over rivers in delivering nutrients into the Bohai and sustain the new production, following recent decrease in riverine inflow caused by drought periods in North China and damming practices. A historical review of nutrient data indicates that concentrations of nitrogen increase and phosphorus and silica decrease in the Central Bohai over last 40 years. This potentially has an important influence on the health of ecosystem in Bohai (e.g. food web and community structure), though further study is needed to examine the scenario in more detail.     

Are travelers substituting between transportation network companies (TNC) and public buses? A case study in Pittsburgh

Transportation - Transportation network companies (TNC) provide mobility services that are influencing travel behavior in unknown ways due to limited TNC trip-level data. How they interact with...     

Vulnerability of Coastal Resort Cities to Mean Sea Level Rise in the Mexican Caribbean

We evaluated the potential economic impacts of increasing sea level rise (SLR) along the Mexican Caribbean where there are major gaps in our understanding of the mechanisms controlling flooding duration and frequency associated to future ecological and economic impacts. We determined the negative economic impact of SLR on infrastructure in the largest urban centers (Cancun, Isla Mujeres, Playa del Carmen, Puerto Morelos and Cozumel) in the state of Quintana Roo (Mexico) that are considered the largest tourism “hot spots” (resort cities) in the country. The tourism industry in this coastal area injects >8 billion dollars year^?1 to the Mexican economy. Our conservative economic assessment regarding the impact of SLR, under a 1?m scenario for all coastal cities is $330 million USD. Further projections for worst scenarios (SLR >2 m) show a non-linear trend where the cost of inaction can reach up to $1.4 billion USD (2?m SLR scenario) and $2.3 billion USD (3?m SLR scenario). This potential loss of infrastructure, as construction cost, is staggering and represents a robust baseline to start evaluating with more detail future impacts of climate variability and change on the Mexican Caribbean coastline.     

The relationship between transportation vulnerability,school attendance,and free transportation to an afterschool program for youth

Transportation - Transportation vulnerability, defined as lack of access to transportation resulting in financial, social, or health consequences, reduces quality of life. While research has...     

Calculation of vaulted magnetic field above ship using equivalent surface magnetic charge北大核心CSCD

[目的]为了获得舰船上方不同高度平面磁场数据,解决舰船上方拱顶磁场推算到平面磁场的问题,提出用面磁荷法进行舰船上方的磁场推算。[方法]从等效源理论出发,利用拱顶磁场数据进行反演建模,将舰船磁场等效为面磁荷产生的磁场,用面磁荷正演舰船上方的磁场。将面磁荷法推算出的磁场与舰船实际磁场进行对比,验证面磁荷法的可行性。[结果]通过数值仿真计算,舰船磁场垂直分量推算的相对均方根误差为0.44%;利用磁性船模进行实验分析,磁场垂直分量推算的相对均方根误差为7.64%。[结论]仿真和船模实验分析表明,利用面磁荷法进行磁场推算,其推算值与测量值较为吻合,推算的相对均方根误差较小,具有较高的精度,可用于实际工程计算。