Fuel saving and ridesharing in the US: Motivations,limitations, and opportunities

Ridesharing can reduce the fuel consumed in noncommercial passenger highway vehicles by grouping individuals into fewer vehicles and reducing the number of miles that vehicles must travel. We estimate the potential fuel savings that could result from an increase in ridesharing in the US. If no additional travel is required to pick up passengers, adding one additional passenger for every 100 vehicles would reduce annual fuel consumption by 0.80–0.82 billion gallons of gasoline per year; if one passenger were added in every 10 vehicles, the potential savings would be 7.54–7.74 billion gallons per year. However, ridesharing may require extra travel to pick up additional passengers, which can reduce and possibly eliminate potential fuel savings. The tradeoff between saving fuel and spending time to pick up additional passengers is investigated, finding that, on average, ridesharing may not be attractive to travelers, but can be made more attractive by increasing per-vehicle-trip costs such as parking and tolls.     

Non-singular slip (NSS) method for longitudinal tire force calculations in a sudden braking simulation

In a dynamic vehicle simulation, longitudinal tire force is primarily based on the longitudinal slip (ratio). In the longitudinal slip formula, state variables are used in the denominator. This causes a divergence problem for numerical simulations of vehicle dynamics. To avoid this numerical singularity, a differential slip calculation method was developed for use in dynamic vehicle simulations. However, this method also causes a singularity when the wheel velocity approaches zero in a pure slip state, such as during sudden braking. In this paper, a new longitudinal slip calculation method, which can overcome singularities in all velocity conditions, is proposed. For this purpose, the Taylor series is adapted to the slip formula and the idea of virtual wheel rotation stiffness is introduced for the development of the slip equation. The physical phenomenon at the zero slip state is analyzed. Finally, the proposed slip formula is used to solve the numerical singularity problem, and the non-singular slip (NSS) calculation method is proposed. The proposed NSS method is applied to tire model performance test (TMPT) simulations to validate its performance.     

Traffic flooding the low countries: How the Dutch cope with motorway congestion

Motorway congestion is a common characteristic of the larger conurbations all over the world. Using the example of the Randstad region in The Netherlands, the causes and conditions for the growing congestion on main roads are presented and explained. From an international comparison it appears that the Randstad region is characterized by a relatively high density and high-access quality of its motorway network, giving rise to an extremely high level of usage. The Dutch policy of coping with the consequent congestion problems at the network design level is outlined, followed by a presentation of the dynamic traffic management approaches to these problems. Special attention is given to the so-called target group policy that aims at prioritizing specific user groups such as freight traffic and trucks. Finally, attention is given to the Dutch attempts to introduce congestion pricing as a means of tackling congestion.     

Microeconomic determinants of dry bulk shipping freight rates and contract times

While the literature has established macroeconomic determinants of shipping freight (charter) rates, there has been no systematic investigation of the microeconomic determinants of shipping freight rates. Therefore, the purpose of this paper is to investigate microeconomic determinants of freight rates in the dry bulk shipping market, using a large sample of individual dry bulk charter contracts from January 2003 to July 2009. Differences in freight rates across major dry bulk shipping routes, the geographical distribution of shipping activities around the world, and the duration of the laycan period of shipping contracts are also investigated. Estimated results suggest that the laycan period and dry bulk freight rates are interrelated and determined simultaneously. Furthermore, vessel deadweight, age and voyage routes are important determinants of dry bulk shipping freight rates, while determinants of the laycan period of chartered vessels include vessel age, freight rate level, and freight rate volatility.     

Modeling interdependencies between vehicle transaction,residential relocation and job change

This paper introduces a vehicle transaction timing model which is conditional on household residential and job relocation timings. Further, the household residential location and members’ job relocation timing decisions are jointly estimated. Some researchers have modeled the household vehicle ownership decision jointly with other household decisions like vehicle type choice or VMT; however, these models were basically static and changes in household taste over time has been ignored in nearly all of these models. The proposed model is a dynamic joint model in which the effects of land-use, economy and disaggregate travel activity attributes on the major household decisions; residential location and members’ job relocation timing decisions for wife and husband of the household, are estimated. Each of these models is estimated using both the Weibull and log-logistic baseline hazard functions to assess the usefulness of a non-monotonic rather than monotonic baseline hazard function. The last three waves of the Puget Sound Panel Survey data and land-use, transportation, and built environment variables from the Seattle Metropolitan Area are used in this study as these waves include useful explanatory variables like household tenure that were not included in the previous waves.     

Dynamic ride-sharing: A simulation study in metro Atlanta

Smartphone technology enables dynamic ride-sharing systems that bring together people with similar itineraries and time schedules to share rides on short-notice. This paper considers the problem of matching drivers and riders in this dynamic setting. We develop optimization-based approaches that aim at minimizing the total system-wide vehicle miles incurred by system users, and their individual travel costs. To assess the merits of our methods we present a simulation study based on 2008 travel demand data from metropolitan Atlanta. The simulation results indicate that the use of sophisticated optimization methods instead of simple greedy matching rules substantially improve the performance of ride-sharing systems. Furthermore, even with relatively low participation rates, it appears that sustainable populations of dynamic ride-sharing participants may be possible even in relatively sprawling urban areas with many employment centers.     

Torque ripple minimization control of permanent magnet synchronous motors for EPS applications

This paper identifies a control method used to reduce torque ripple of a permanent magnet synchronous motor (PMSM) for an electric power steering (EPS) system. NVH (Noise Vibration Harshness) is important for safe and convenient driving. Vibration caused by motor torque is a problem in column type EPS systems. Maintaining a very low torque ripple is one solution that allows for smoother steering. Theoretically, it is possible to design and drive the motor without torque ripple. However, in reality, a PMSM system torque ripple is caused by the motor itself (saturation in the iron core and EMF distortion) and the imperfect driver. This paper analyzes torque ripple of a PMSM system, and an advanced PMSM control method for the column typed EPS system is presented. Results of the analysis indicate that the compensation current is needed in order to minimize torque ripple when a PMSM is driven.     

Powertrain system optimization for a heavy-duty hybrid electric bus

This research concerns the design of a powertrain system for a plug-in parallel diesel hybrid electric bus equipped with a continuously variable transmission (CVT) and presents a new design paradigm for the plug-in hybrid electric bus (HEB). The criteria and method for selecting and sizing powertrain components equipped in the plug-in HEB are presented. The plug-in HEB is designed to overcome the vulnerable limitations of driving range and performance of a purely electric vehicle (EV), and it is also designed to improve the fuel economy and exhaust emissions of conventional buses and conventional HEBs. Optimization of the control strategy for the complicated and interconnected propulsion system in the plug-in parallel HEB is one of the most significant factors for achieving higher fuel economy and lower exhaust emissions in the hybrid electric vehicle (HEV). In this research, the proposed control strategy was simulated to prove its validity using the ADVISOR (advanced vehicle simulator) analysis simulation tool.     

Development of a path planning system using mean shift algorithm for driver assistance

The longitudinal and lateral vehicle control techniques have been widely used in several active driver assistance systems. The adaptive cruise control, lane keeping assistant control, vehicle platooning and stop-and-go control are typical examples of the most important applications. In this study, a novel path planning method is proposed considering the driving environment such as road shape, ego vehicle and surrounding vehicles’ movement. The relative distance and velocity between the ego vehicle and surrounding vehicles are identified with respect to the predicted lane shape in front of the ego vehicle. Based on the identified information, the road shape and surrounding vehicles are mapped into the intensity image and the desired vector for the ego vehicle’s movement is determined by the maximum intensity density tracing method. The desired vehicle path is followed by the acceleration/deceleration control and the steering assist control, respectively. In order to evaluate the performance of the proposed system, simulations are conducted and compared with ACC systems.     

Optimal design of the exhaust system layout to suppress the discharge noise from an idling engine

At the idle engine speed, the exhaust discharge noise is influenced by resonances in the whole system, which is composed of connecting pipes and silencers. This pipe resonance radiates a high level of low frequency discharge noise, which is dominated by the low order harmonics of the engine firing frequency. This low frequency noise deteriorates the vehicle’s interior noise level and quality. The following study attempted to optimize the layout of an exhaust system to minimize low frequency noise by changing the position of silencers and the lengths of inlet and outlet pipes in each silencer. After modeling the exhaust system using four-pole parameters, the acoustical performance of the system was evaluated using the system insertion loss. In the optimization, the virtual attenuation coefficient, which corresponds to the amount of attenuation coefficient required for the silencers, was calculated to find a minimum value for the layout. The simulated annealing method, which is also known as finding an optimal, was employed in searching for the optimized exhaust layout. Test examples of two cases, for two and six design variables, were used. When the number of design variables was two, the positions of the center and rear silencers were considered. When the number of design variables was six, the positions of the two silencers and the lengths of the inlet and outlet pipes were considered. Three typical layouts for the exhaust system of each case were designed, including the given system and an optimal system. By comparing the predicted and measured discharge noise level, it was confirmed that the optimized exhaust layout has a higher noise reduction than the other layout designs.