城市快速轨道交通空气动力学相关问题探讨

随着城市轨道交通的快速发展,其设定的最高速度目标值突破了现行地铁相关规范最高速度的适用范围,许多在低速时可以忽略的空气动力学现象在快速时就变得不容忽视.结合目前的隧道阻塞比,给出城市快速轨道交通所出现的由空气动力学效应引起的相关现象,并结合地铁自身特点进行定性分析,提出相应的减缓措施,以期对进一步的研究提供参考方向,对...     

地铁盾构隧道管片设计参数的敏感性分析

以苏州地铁盾构隧道为计算原型,对设计中的关键参数进行敏感性分析,讨论设计方法、地质参数及结构参数对管片设计的影响,以及管片在水土分算与水土合算条件下受力性能的差异,并对苏州地铁盾构管片设计提出合理建议。     

地铁车辆段电力外线及室外照明设计

通过对地铁车辆段电力外线的整合和规划,充分利用复杂狭窄的管线空间,使用不同的方式对室外各电力管线合理敷设,对各种敷设方式的利弊进行对比分析;阐述车辆段的室外照明设计,对今后的室外照明设计提出改进建议。     

地铁地下车站公共区防排烟设计相关探讨

通过对广州、深圳等城市已通车地铁地下车站工程的分析,从设计本身以及最新规范的相关防排烟条文出发,论述地铁地下车站公共区的防排烟模式和排烟风机的选择,提出防排烟设计在防排烟模式、防烟分区划分以及排烟风机选择方面应注意的事项,并给出相应的建议.     

不同动力电池新能源货运配送车辆节能减排绩效评价研究

为研究新能源货运车辆装配不同动力电池对节能减排的影响,选取某款新能源货运配送车辆为研究对象,利用GaBi软件建立了3种常用动力电池的整车生命周期评价模型,从原材料获取、生产制造、装配、运行使用、报废回收5个阶段进行节能减排差异分析,并对全球变暖潜值 （Global Warming Potential,GWP） 等环境影响类型进行归一化处理和量化计算处理。结果表明,分别装配3种电池整车的化石能源消耗以煤炭为主、环境排放以CO2为主;纯电动汽车的能源消耗、污染物排放集中在运行使用阶段;综合比较,装配了三元锂电池的整车,其全生命周期节能减排效果最佳,装配了锰酸锂电池的整车则表现最差。加大清洁能源的使用力度、减少用于电力生产的化石能源消耗、提高回收率等措施,可以显著减少污染物排放。     

Regulatory reform and freight mode choice

Reform of trucking Vehicle Weights and Dimensions (VWD) regulations in Canada is now underway. The effect these reforms will have on the freight transportation industry are only recently the subject of research. This paper is part of this new research effort, aimed at understanding how regulatory reform in the trucking sector will affect the existing competitive relationship between trucks and the railways. The paper presents the results of study and research into modelling the relationship between mode choice and the service characteristics that are affected by VWD reform.Using several periods of data, a series of econometric models are developed which help to elucidate the relative relationships between the mode service characteristics for both of the principal interprovincial freight modes. A technique is developed and presented to model railway user costs in order to overcome the complex and often unrepresentable pricing activities of Canadian railways.The strength of the developed econometric models is presented, including their significance and statistical reliability. This is further reinforced by the similarities exhibited by all the models in the series. The selected model is applied to predict market service responses required of the railway industry in order to compete with the trucking sector now adapting to the new regulations.The impact of the newly implemented vehicle weight and dimension reform on the rail transportation industry is analyzed and railway industry improvements aimed at maintaining its market share are presented. The results predicted by the model show that railway user cost reductions should be moderate, and likely less than the level of inflation over the period of time when trucking converts its fleet to take advantage of the new regulations.Abbreviations AASHTO American Association of State Highway and Transportation Officials - CCMTA Canadian Conference of Motor Transport Administrators - EPI End products, inedible commodity classification - GVW Gross Vehicle Weight - NA 1988 VWD National Agreement - RTAC Roads and Transportation Association of Canada - VWD Vehicle Weight(s) and Dimension(s) - WA 1988 VWD Western Agreement     

Modeling intrametropolitan industrial location realistically

This paper compares intrametropolitan industrial location models to the process of intrametropolitan industrial location as described in the real estate and urban economic literature. It identifies seven areas where industrial location models are at odds with reality, and suggests ways to make them realistic. Specifically, it makes a case for microanalytic/stochastic/recursive/dynamic/economic industrial location models. It goes on to describe an operational model that is realistic in most respects.     

用稀土催化剂净化柴油机排气的研究

介绍了所研制的用于柴油机排气净化的新型稀土钙钛矿型复合金属氧化物催化剂LaMnO3／γ-Al2O3。通过发动机试验的方法研究其净化效果，并与γ-Al2O3，颗粒、贵金属催化剂Pd／γ-Al2O3进行了比较。结果表明，LaM-nO3／γ-Al2O3对CO、HC、微粒及微粒中的有机组分SOF均有化学催化净化效果，尤其是对SOF净化效果明显。     

气压ABS系统流量特性的实验研究

开发了气压ABS电磁阀测试系统，建立了气室充、放气过程压力变化的微分方程，结合两者研究了气压ABS系统的流量特性，获得了某中型客车ABS系统在不同情况下的流量系数。讨论了ABS电磁阀的结构参数和动作频率对整个系统流量特性的影响，并得到了几种典型动作频率下的流量系数。建立的气室压力模型和所求得的流量系数为气压ABS控制逻辑的设计提供了依据。