Multi-objective optimization of quarter-car models with a passive or semi-active suspension system

A systematic methodology is applied in an effort to select optimum values for the suspension damping and stiffness parameters of two degrees of freedom quarter-car models, subjected to road excitation. First, models involving passive suspension dampers with constant or dual rate characteristics are considered. In addition, models with semi-active suspensions are also examined. Moreover, special emphasis is put in modeling possible temporary separations of the wheel from the ground. For all these models, appropriate methodologies are employed for capturing the motions of the vehicle resulting from passing with a constant horizontal speed over roads involving an isolated or a distributed geometric irregularity. The optimization process is based on three suitable performance criteria, related to ride comfort, suspension travel and road holding of the vehicle and yielding the most important suspension stiffness and damping parameters. As these criteria are conflicting, a suitable multi-objective optimization methodology is set up and applied. As a result, a series of diagrams with typical numerical results are presented and compared in both the corresponding objective spaces (in the form of classical Pareto fronts) and parameter spaces.     

Nonlinear three-dimensional wagon-track model for the investigation of rail corrugation initiation on curved track

A nonlinear wagon-track model on curved track has been developed to characterize rail corrugation formation due to self-excitation of the wheel-rail stick-slip process. In this model, wagon movements were described using up to 78 degrees of freedom (DOFs) to model a three-piece freight bogie. Innovatively, the wheelset movements are described using nine DOFs, including torsional and bending modes about the longitudinal and vertical directions. The track modelling is considered as a one-layer structure (two rail beams on discrete spring and damper elements). The wheel sliding after creepage saturation is considered in the wheel-rail interface modelling. Simulation of a case study shows that the frequencies of the wheel stick-slip process are composed of the basic frequency, which might come from the combined effect of sleeper-passing frequency and one-third of the combined torsional and bending frequency of the wheelset, and the double and triple basic frequencies, which form the wavelengths of rail corrugation at different situations.     

An algorithm for finding reasonable paths in transit networks

In this paper, reasonable paths in transit networks are defined as possible paths that satisfy the acceptable time criterion and transfer‐walk criterion. A recursive algorithm for finding all of the reasonable paths in a transit network that does not involve a rapid increase in program run‐time with network size is presented. Realistic transit networks in Hong Kong and Guangzhou were selected as case studies of the different phases of the development of a trip planning system. Transport planning practitioners and potential users were invited to test the system to evaluate its performance. The results of the prototype evaluation were satisfactory, and the viability of the system as a useful tool for supporting decision‐making has been confirmed by the positive feedback that was obtained from survey questionnaires.     

Optimal Preview Control of a Two-dof Vehicle Model Using Stochastic Optimal Control Theory

An optimal preview control algorithm is applied to a two degree of freedom(dof) vehicle model travelling with constant velocity on a randomly profiled road. The road roughness is modelled as a homogeneous random process being the output of a linear first order filter to white noise. The input from the road irregularity is assumed to be measured at some distance in front of the vehicle and this measured infonnation is utilized by the active controller to prepare the system for the ensuing input. The preview control algorithm is obtained by minimizing a quadratic performance index and by describing the average behaviour of the system by the covariance matrix of the vehicle response state vector. Results are presented for full state feedback and significant improvements in sprung mass acceleration, suspension working space and road holding are observed.     

Damper Models for Heavy Vehicle Ride Dynamics

A laboratory rig for testing hydraulic dampers using the 'hardware-in-the-loop' method is described, and the accuracy of the test method is investigated. A mathematical model of a hydraulic shock absorber is then developed. The model is suitable for vehicle simulations and has seven parameters which can be determined by simple dynamic measurements on a test damper. The shock absorber model is validated under realistic operating conditions using the test rig, and the relative importance of various features of the model on the accuracy of vehicle simulations is investigated.     

Short-term Hourly Traffic Forecasts using Hong Kong Annual Traffic Census

The need for acquiring the current-year traffic data is a problem for transport planners since such data may not be available for on-going transport studies. A method is proposed in this paper to predict hourly traffic flows up to and into the near future, using historical data collected from the Hong Kong Annual Traffic Census (ATC). Two parametric and two non-parametric models have been employed and evaluated in this study. The results show that the non-parametric models (Non-Parametric Regression (NPR) and Gaussian Maximum Likelihood (GML)) were more promising for predicting hourly traffic flows at the selected ATC station. Further analysis encompassing 87 ATC stations revealed that the NPR is likely to react to unexpected changes more effectively than the GML method, while the GML model performs better under steady traffic flows. Taking into consideration the dynamic nature of the common traffic patterns in Hong Kong and the advantages/disadvantages of the various models, the NPR model is recommended for predicting the hourly traffic flows in that region.     

亚硝胺

与二烯烃橡胶相比，EPDM的双键很少：为了提高EPDM胶料的硫化速度，需要加入大量的促进剂。由于某些促进剂中含有仲胺，这是亚硝胺的主要来源，因此人们正在考虑使用一类新的促进剂。考察了不同硫化体系对亚硝胺排放、加工参数和物理性能的影响，片采用试验设计方法对硫化体系进行了优化。     

Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

Dynamic Estimation of Road Bank Angle

Road bank angles have a direct influence on vehicle dynamics and lateral acceleration measurement. A vehicle stability control system that knows road bank angle has an advantageous capability in achieving desired control sensitivities for maneuvers on ice and snow, among all surfaces, while avoiding false/nuisance activation on a banked road. Since neither lateral velocity nor road bank angle are directly measurable in current vehicle systems due to economical reasons, the major challenge is to differentiate the bias induced by road bank disturbances from actual effect of vehicle lateral dynamics in current measurements. This paper proposes a method of road bank estimation and provides theoretical background for the decoupling effort of lateral dynamics and road disturbances involved in bank estimation.     

Two-Dimensional Motion of Vehicles Damaged due to Collision

This paper deals with two-dimensional motion analysis of vehicles damaged due to collision. Various parts of vehicles are damaged due to collision in general. The effects of the damage in vehicle body and wheels on the vehicle motions are investigated. The center of gravity of the vehicle and the polar moment of inertia are changed by the deformation of vehicle body. Furthermore, the geometrical relations of wheels like wheelbase, treads and steering angles may be changed by damage of the wheels. Thus the vehicle loses symmetry with respect to the vehicle axis. The four-wheel vehicle model is extended to take into account the vehicle damage due to collision. The motions of damaged vehicles are compared with those of undamaged vehicles. It is found that vehicle damages have a significant influence on vehicle motion after impact.