炎热天气对钢渣混凝土抗压强度的影响

将普通混凝土和钢渣质量分数为10％、30％和50％的混凝土试件分别放入40℃、50℃和60℃的热水中,测试了不同龄期试件的抗压强度和超声波脉冲速度,分析了炎热天气对钢渣混凝土抗压强度的影响.分析结果表明:在测试龄期内,各混凝土试件的抗压强度并不随着炎热天气的影响而发生削减;钢渣混凝土试件在第90 d达到最高抗压强度61...     

大型LNG船推进型式研究

介绍了大型LNG船船型的特点,对适合于大型LNG船的推进型式进行了分析研究和模型试验研究,对用于LNG船舶的不同类型的推进装置进行了比较分析。得出了一些结论,并指出在当前低排放绿色船舶的要求下,采用双燃料电力推进方式更有发展前景,但若要在大型LNG船上采用此推进方式,尚有待一些问题的解决。     

软土地基水下真空预压固结离心模型试验

采用新发明的真空吸水系统应用于离心机中,可以使土体产生向上渗流并模拟软土地基真空预压。为获得理想的水下真空预压固结对比效果,竖井采用2种不同井间距的砂井,密封膜采用完全覆盖的形式。用发明的装置产生水下真空得以模拟软土水下固结行为。介绍了模型制作、试验程序及真空发生系统,并分析了孔隙水压力、变形、不排水剪切强度的改变和不同井间距对固结速率的影响。     

基于纸纤维改性的隧道工程透水砂浆性能研究北大核心CSCD

为提出一种适用于隧道初期支护基面找平并且具有一定透水性能的砂浆,将纸纤维加入砂浆试块中对其性能进行改性。通过分析纸纤维的降解原理,并将不同掺量的纸纤维加入砂浆试块中,对其体积密度、吸水率、抗压强度等基本性能指标及微观结构进行测试和分析。由试验结果可知:在碱性环境中,纸纤维具有可降解的性能特点;纸纤维可以使普通砂浆试块的吸水率提升2~3倍,同时也会造成砂浆试块的体积密度和抗压强度降低;对砂浆试块吸水率和抗压强度进行线性拟合后发现其吸水率和抗压强度呈现负相关关系。研究结果表明,通过纸纤维对砂浆进行透水性能的提升是可行的,但是纸纤维掺量对砂浆其他性能的影响还有待进一步研究。     

The implications of MARPOL Annex V on the management of ports and coastal communities

Abstract

The passage of the Marine Plastics Pollution Research and Control Act of 1987 (MPPRCA), which codified Annex V of the International Convention for the Prevention of Pollution from Ships (MARPOL), has encompassed every commercial and recreational shipping and boating facility in the United States. As a group, these ports, harbors, and marinas form a significant, although proportionately small, portion of the coastline of the country. More important, the economic benefits derived from the complex shoreside infrastructures required for international ocean trade, commercial and recreational fishing, and pleasure boating indicate just how critical it is for these facilities to be in conformance with effective and prudent coastal zone and environmental management practices.     

Estimation of road profile variability from measured vehicle responses

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.     

Modeling multi-unit vehicle dynamics for low-speed path-following assessment off-highway

This paper proposes a non-linear dynamics model for articulated vehicles. This model is able to capture common low-speed behaviours of any articulated vehicles off-highway, such as operating for a corner or roundabout on a cambered or slippery surface. It can be used to assess the low-speed manoeuvrability of articulated vehicles under such manoeuvres and conditions. The vehicle model was validated by comparing its path tracking performance to that of the field tests.     

A Study in Port Planning: The Example of Mina Zayed

The correct number of berths that a port should provide is solved by a model which minimizes the total port usage cost in terms of the costs of berth provision and the costs accruing to ships from time spent in the port. This model is then applied to Mina Zayed in the Arabian Gulf as an aid to future planning, and from different sets of cargo forecasts an optimal stategy is derived using a game-theoretic approach.