水泥混凝土路面碎石化层应力强度因子有限元分析

为比较是否碎石化对加铺后沥青路面结构应力的影响,本文从断裂力学入手,借助有限元软件,按等参八节点二维平面应变单元分析了两者在沥青加铺层情况相同时层底的应力强度因子。经对比分析,两者的Ⅰ型应力强度因子差别很大,而Ⅱ型应力强度因子基本相同,表明碎石化后沥青加铺层层底具有更好的受力特性,与不破碎直接加铺相比,能显著降低沥青加铺层底反射裂缝的可能性。这表明碎石化工艺对旧水泥混凝土路面的处治能满足加铺要求,达到了工艺处理的目的。     

Short-term Hourly Traffic Forecasts using Hong Kong Annual Traffic Census

The need for acquiring the current-year traffic data is a problem for transport planners since such data may not be available for on-going transport studies. A method is proposed in this paper to predict hourly traffic flows up to and into the near future, using historical data collected from the Hong Kong Annual Traffic Census (ATC). Two parametric and two non-parametric models have been employed and evaluated in this study. The results show that the non-parametric models (Non-Parametric Regression (NPR) and Gaussian Maximum Likelihood (GML)) were more promising for predicting hourly traffic flows at the selected ATC station. Further analysis encompassing 87 ATC stations revealed that the NPR is likely to react to unexpected changes more effectively than the GML method, while the GML model performs better under steady traffic flows. Taking into consideration the dynamic nature of the common traffic patterns in Hong Kong and the advantages/disadvantages of the various models, the NPR model is recommended for predicting the hourly traffic flows in that region.     

亚硝胺

与二烯烃橡胶相比，EPDM的双键很少：为了提高EPDM胶料的硫化速度，需要加入大量的促进剂。由于某些促进剂中含有仲胺，这是亚硝胺的主要来源，因此人们正在考虑使用一类新的促进剂。考察了不同硫化体系对亚硝胺排放、加工参数和物理性能的影响，片采用试验设计方法对硫化体系进行了优化。     

新的改性沥青设备与加工技术

通过对沥青改性方法的研究 ,基于提高改性沥青单位小时产量的目的 ,探索出利用高速剪切和二次泵技术实施沥青改性。这种加工技术突破了以往沥青改性采用的“胶体磨”技术 ,适用范围广 ,可加工不同种类的改性沥青 ;采用该种加工技术提高了生产效率 ,产品的技术指标满足甚至超过规范要求。通过研制出的改性沥青生产设备制备出 PE、SBS、化学网构改性沥青等 ,而且将这几种改性沥青已应用于实体工程。     

柴油机管理系统开发与设计方法的研究

根据国内外柴油机电控技术开发与设计的经验，阐述了开发与设计柴油机管理系统所采用的最新技术与方法。通过新技术与新方法的运用，提高整个系统功能控制和以数管理的性能，最终达到改善柴油机经济性，动力性及排放等的目的。     

Dynamic Estimation of Road Bank Angle

Road bank angles have a direct influence on vehicle dynamics and lateral acceleration measurement. A vehicle stability control system that knows road bank angle has an advantageous capability in achieving desired control sensitivities for maneuvers on ice and snow, among all surfaces, while avoiding false/nuisance activation on a banked road. Since neither lateral velocity nor road bank angle are directly measurable in current vehicle systems due to economical reasons, the major challenge is to differentiate the bias induced by road bank disturbances from actual effect of vehicle lateral dynamics in current measurements. This paper proposes a method of road bank estimation and provides theoretical background for the decoupling effort of lateral dynamics and road disturbances involved in bank estimation.     

发动机缸盖内部冷却水腔的设计与流动数值模拟

讨论了发动机缸盖内部冷却水腔设计的发展趋势及要求 ,应用自行开发的三维流动数值模拟计算软件对冷却水腔内的流动情况进行了数值模拟。     

Two-Dimensional Motion of Vehicles Damaged due to Collision

This paper deals with two-dimensional motion analysis of vehicles damaged due to collision. Various parts of vehicles are damaged due to collision in general. The effects of the damage in vehicle body and wheels on the vehicle motions are investigated. The center of gravity of the vehicle and the polar moment of inertia are changed by the deformation of vehicle body. Furthermore, the geometrical relations of wheels like wheelbase, treads and steering angles may be changed by damage of the wheels. Thus the vehicle loses symmetry with respect to the vehicle axis. The four-wheel vehicle model is extended to take into account the vehicle damage due to collision. The motions of damaged vehicles are compared with those of undamaged vehicles. It is found that vehicle damages have a significant influence on vehicle motion after impact.     

Vehicle Motion Analysis in Relation to Vehicle Safety

The influence of vehicle handling on the possible avoidance of accident situations is discussed. lit is shown that accident reconstruction at present does not provide the necessary information to relate the cause of accidents to the lack of road worthiness of vehicles. It follows that the vehicle behavior in proximity of its performance limit must be determined in order to infer its accident avoidance potential.

The paper presents a review of the state-of-the-art of vehicle modeling, simulation of vehicle maneuvers and full scale testing. The application of the direct method of the stability theory is suggested as a possible means of obtaining performance limit envelopes which are necessary for establishing standards of the performance of vehicles.