自动驾驶仪系统在航测机中的应用及故障处理

航测机为高质量地完成航拍和重力测量任务,把飞行员从繁重的飞行操纵中解脱出来,需要在飞机上安装自动驾驶仪系统,使飞机在自动驾驶仪的控制下完成定高和定向飞行。阐述APS-65自动驾驶仪系统的组成、功能和特点,对航测机上安装APS-65自动驾驶仪系统过程中遇到的问题进行分析,并提出处理措施。     

SAR轨迹偏离条件下三维场景回波模拟研究

由于大气干扰的影响,雷达平台很难按照理想轨迹飞行,因此对SAR轨迹偏离下的三维场景回波模拟研究具有现实意义,但此方面在国内研究较少.文中基于SAR轨迹偏离条件下的回波信号模型,提出了适合此模式的SAR回波模拟频域算法,推导了SAR回波频域模拟公式,分析了算法的性能及应用范围,给出了仿真结果和结论,证明了所提算法的有效性和可行性.     

基于影响矩阵的桥梁合理设计状态的确定

在分析基于线性、非线性调值计算的影响矩阵法的基础上,深入剖析影响矩阵法在斜拉桥、系杆拱桥、自锚式悬索桥及预应力混凝土梁式桥合理成桥状态确定中的应用,提出一些较具实用价值的计算方法,可为桥梁设计提供有益的参考。     

Modeling and simulation of fuel cell hybrid vehicles

A comprehensive procedure for mathematical modeling and validation of a fuel cell hybrid vehicle (FCHV) is presented in this paper. The subsystems are modeled based on lab testing and in-field vehicle testing results from the Tongji University Start prototype vehicle. An FCHV-SIM (fuel cell hybrid vehicle simulation) model is then developed based on the experimental data. Model validation results confirm that the FCHV-SIM model is reasonably accurate and suitable for model-based control development.     

Performance characteristics of a supplementary stack-cooling system for fuel-cell vehicles using a carbon dioxide air-conditioning unit

In fuel-cell-powered vehicles, the fuel-cell system requires a thermal-management subsystem to dissipate heat released during the reaction of hydrogen with oxygen. When the stack generates power at a high rate, a large amount of heat is also generated. If cooling by the radiator is insufficient, a supplementary stack-cooling system is needed to maintain a safe operating temperature. In this study, the performance of a CO₂ air-conditioning unit for stack cooling was investigated under various conditions, and the relationship between cabin cooling and stack cooling was also studied. The coefficient of performance (COP) increased from 1.9 to 2.4, with an increase in cabin-air inlet flow rate from 0 to 8 m³/min. When the air-conditioning unit was turned off, the cooling capacity of the stack cooler was increased; correspondingly, as the cabin-cooling capacity was increased, that of the stack cooler decreased. With an increase in ambient-air inlet temperature from 38°C to 45°C, the COP decreased by 24%. Additionally, both the stack-cooling capacity and cabin-cooling capacity were decreased by about 12% and 16%, respectively, due to reduced heat transfer in the gas cooler as the ambient air inlet temperature was increased. It is expected that the experimental results can serve as a resource in designing a stack-cooling system using a CO₂ air-conditioning unit to enhance stack power generation and efficiency.     

Stochastic analysis of the variation in injury numbers of automobile frontal crash tests

Although automobile crash test data have a comparatively large variation because of the complexity of the tests, only a limited number of crash tests are usually conducted due to monetary and time limitations. Thus, it is necessary to control input variables that cause the variation in test data to obtain consistent crash test results and to correctly assess the safety performance of an automobile under development. In this study, a MADYMO model was validated deterministically to yield the head, chest, pelvis deceleration pulses of anthropomorphic test devices and the belt load pulses similar to those from actual tests, and it was also validated stochastically to yield means and standard deviations of the head and chest injury numbers, i.e., HIC ₁₅ and 3 msec clip similar to those from actual tests. A stochastic analysis was conducted using the validated MADYMO model to calculate the sensitivity of the standard deviations of the injury numbers to the standard deviations of influential input variables to determine the most influential input variable that makes the largest contribution to the variation in the injury numbers. Moreover, the Taguchi approach was used to determine the optimal values of the influential input variables to improve safety performance.     

Age and cross-cultural comparison of drivers’ cognitive workload and performance in simulated urban driving

Driving demands significant psychomotor attention and requires even more when drivers are engaged in secondary tasks that increase cognitive workload and divert attention. It is well established that age influences driving risk. Less is known about how culture impacts changes in attention. We conducted parallel driving simulations in the US and Korea to measure the extent to which age and culture influence dual-task performance. There were 135 participants divided into two groups: a younger group aged 20∼29, and an older group aged 60∼69. Whereas some differences by culture appeared in absolute control measures, the younger participants showed similar mean velocity and compensatory patterns associated with increased cognitive load in the urban setting; however, the results from the older samples were less similar.     

New procedure to estimate the brake warping in a roller tester

Vehicle systems such as the steering, brakes and suspension greatly influence vehicle safety. Therefore, these systems must be inspected to guarantee that they are functioning correctly and to certify that the vehicle is functioning at a satisfactory safety level. In disc brakes, warping is one of the principal reasons for vibrations and noise, and it contributes to diminished brake efficiency. Currently, the International Motor Vehicle Inspection Committee (CITA) demands disc brake warping inspections occur during periodic motor vehicle inspections (PMVIs); however, the procedure to carry out this inspection is not well defined. In this investigation, the warping phenomenon has been analyzed, and a new inspection procedure is proposed.     

Integration of experiment and hydrostatic fluid-structure finite element analysis into dynamic characteristic prediction of a hydraulically damped rubber mount

Hydraulically damped rubber mount (HDM) can effectively attenuate vibrations transmitted between an automotive powertrain and body/chassis and reduce interior noise in the car compartment. Predicting the dynamic characteristics of a HDM faces challenges due to fluid-structure interactions between the rubber spring and fluid in the chambers, nonlinear material properties of the rubber parts and turbulent flow in the chambers and fluid track linking chambers. In this paper, an experimental analysis and hydrostatic finite element (FE) modeling technique are integrated in a numerical simulation approach to modeling the dynamic characteristics of a HDM with a lumped-parameter HDM model. The dynamic characteristics of a typical HDM with a fixed decoupler are predicted and compared with experimental results, which verify the effectiveness of the proposed approach. Moreover, a parametric effect analysis is performed to demonstrate parameter influence on dynamic characteristic, which provides a concise design guideline for the parameter adjustments necessary for a HDM to meet the vibration isolation requirements of a powertrain mount system.     

Accelerated life prediction of fillet-type,gas-welded joints

In this paper, in order to save time and cost for the fatigue design and to develop the optimum approaches for accelerated life prediction of the fillet gas welded joints, the (Δσ)_R − N_f relationship was obtained from actual fatigue test data, including welding residual stress. Based on these results, the (Δσ_a)_R − (N_f)_ALP relationship derived from the method of statistical probability analysis was compared with the actual fatigue test data. From the result, the optimum statistical distribution for the accelerated life prediction was analyzed to be the lognormal distribution for the fillet-type, gas-welded joint. The mean accuracy of the accelerated life prediction was assessed to be 85∼95% of the actual test life at the 95% reliability level and ±15% standard deviation. Therefore, it is expected that the accelerated life prediction will provide a useful method for determining the criterion for fatigue design and for predicting a specific target life.