Basic design of a series propeller with vibration consideration by genetic algorithm

Genetic algorithms (GAs) can powerfully search for parameters in a large multidimensional design space. Thus, the principle can be applied to preliminary series propeller design problems with multiple considerations. In the present study, B-series propeller design was conducted using a GA for both hydrodynamic efficiency and vibration consideration. The objective function was set by users who could freely weight the relative importance of efficiency and vibration. GAs were successfully shown to be able to obtain an optimal set of parameters leading to efficient performance and low vibration.     

Instantaneous frequency estimation of multi-component Chirp signals in noisy environments

A classical time-varying signal,the multi-component Chirp signal has been widely used and the ability to estimate its instantaneous frequency(IF) is very useful. But in noisy environments,it is hard to estimate the IF of a multi-component Chirp signal accurately. Wigner distribution maxima(WDM) are usually utilized for this estimation. But in practice,estimation bias increases when some points deviate from the true IF in high noise environments. This paper presents a new method of multi-component Chirp signal IF estimation named Wigner Viterbi fit(WVF) ,based on Wigner-Ville distribution(WVD) and the Viterbi algorithm. First,we transform the WVD of the Chirp signal into digital image,and apply the Viterbi algorithm to separate the components and estimate their IF. At last,we establish a linear model to fit the estimation results. Theoretical analysis and simulation results prove that this new method has high precision and better performance than WDM in high noise environments,and better suppression of interference and the edge effect. Compared with WDM,WVF can reduce the mean square error(MSE) by 50% when the signal to noise ration(SNR) is in the range of -15dB to -11dB. WVF is an effective and promising IF estimation method.     

Climate change and the future Maritime Policy for the EU

A cross-cutting Maritime Policy can ensure that climate change threats and challenges in regards to seas and oceans are dealt with in a wide policy framework that takes into account the impacts that climate change may have on other sectors and vice versa.     

The influence of route choice and operating conditions on fuel consumption and CO<Subscript>2</Subscript> emission of ships

The influence of various parameters, such as ship initial speed (full ahead and lower engine loads), loading condition, heading angle and weather conditions on ship fuel consumption and CO₂ emission is presented. A reliable methodology for estimating the attainable ship speed, fuel consumption and CO₂ emission in different sea states is described. The speed loss is calculated by taking into account the engine and propeller performance in actual seas as well as the mass inertia of the ship. The attainable ship speed is obtained as time series. Correlation of speed loss with sea states allows predictions of propulsive performance in actual seas. If the computation is used for weather routing purposes, values for various ship initial speed, loading conditions and heading angles for each realistic sea‐state must be provided. The voluntary speed loss is taken into account. The influence of the ship speed loss on various parameters such as fuel consumption and CO₂ emissions is presented. To illustrate the presented concept, the ship speed and CO₂ emissions in various routes of the Atlantic Ocean are calculated using representative environmental design data for the track of the routes where the ship will sail.     

Application of fuel-saving strategies onboard high-speed passenger ships

Strategies of fuel consumption onboard ships are of one of the crucial issues in marine shipping industry. Many of the relevant authorities maritime domain gave great interesting to that issue, either through research that discussed the impact of marine fuel consumption on the environment and economy of ships or through practical experiments’ that are made by marine engine manufacturers. Over the years, many solutions have been put forward to overcome this problem while maintaining the amount of goods transported globally at the same transfer rate and ship speed. The present paper sheds light on many of the methods used currently to reach this purpose. It is explained that applying a certain fuel-saving strategy will rely on some of the factors, especially the type of ship. Mainly two methods including: shore-side power and cold out of heat strategies have been investigated regarding adaption, economic, and environmental issues in case of applying onboard high-speed passenger ships.     

Numerical investigation of the gate motion effect on a dam break flow

The effects of a moving gate on dam break flow experiments are numerically considered in this paper. The dam break flow process is modelled by a sudden gate release. A Constrained Interpolation Profile (CIP)-based model is employed to solve the Navier-Stokes equations with the free surface boundary condition to deal with the water-air-gate interactions. In addition, the VOF-type THINC/SW method is used to capture the free surface. The movable gate is simulated by an immersed boundary, and a gate motion formula is proposed from existing experimental data and applied in the dam break flow computations. The difference between the water profile and pressure domain with/without gate motion is examined. The dam breaks with different gate motions are discussed as well. The numerical results show that the proposed gate motion formula correlates well with the numerical modelling, and the gate motion has a significant influence in the water collapse process and cannot be neglected in the study of dam break.     

Roll-induced bifurcation in ship maneuvering under model uncertainty

In this paper, a mathematical model is developed for the maneuvering motion of a naval ship and bifurcations of its equilibrium are identified in roll-coupled motion. The subject ship is a high-speed surface combatant with twin-propeller twin-rudder system. Captive model tests are conducted for the ship using planar motion mechanism. Maneuvering coefficients are calculated by polynomial curve fitting of the test data. Uncertainty distribution in the coefficients is assumed same as that of the curve fitting errors. Uncertainty in the model coefficients is propagated to full-scale simulation results by the stochastic response surface method (SRSM). This method is computationally efficient as compared to standard Monte Carlo simulation technique. The SRSM uses polynomial chaos expansion of orthogonal to fit any probability distribution. Bifurcation analysis of the mathematical model is performed by varying the vertical center of gravity as the bifurcation parameter. Hopf bifurcation is identified. It is found that the bifurcations occur due to the coupling of roll motion with sway, yaw motion and rudder angle. In the presence of wind, roll angle response in bifurcation diagram is discussed.     

Optimization of integrated scheduling of handling and storage operations at automated container terminals

Increasing demand for containerization compels container terminals to improve their performance. Uncoordinated scheduling of operations is one of the main factors accounting for poor performance at automated container terminals (ACTs). To increase land utilization efficiency and lower operational times, a new storage system called the split-platform automated storage/retrieval system (SP-AS/RS) has been introduced for temporary storage of containers. This paper describes a multi-objective mixed-integer programming (MIP) model that is based on a combination of multiple interacting sub-tasks. It is aimed at optimizing the integrated scheduling of handling and storage operations in ACTs. The MIP model objective function is to minimize delays in the loading/unloading tasks of the cranes and the travel time of vehicles and platforms in the SP-AS/RS. At the same time, a simulated annealing algorithm (SAA) that provides near-optimal solutions for the problem in a reasonable computation time is appraised. The results of this study show that the objective function of the MIP model is, on average, 58 % lower than that of the non-integrated scheduling method. On the other hand, the best objective function values obtained by the SAA indicate only a 3.7 % disadvantage in comparison with optimal values determined by the MIP model, demonstrating that the SAA is able to provide near-optimal solutions for the integrated scheduling of handling and storage operations.     

On the vibrational characteristics of a two-tier scaled container stack

It is estimated that around 10,000 containers are lost during maritime transportation every year, representing an economic loss to the liner industry. Regulations and norms used to calculate values to secure them to the ship’s deck account for static loads only, neglecting more realistic conditions. This paper describes an approach to simulate a two-tier scaled model of a 20-ft ISO freight container and its linking connectors, denominated twist locks, subject to a dynamical load induced by its base. To analyze this problem two methods were employed: a shaking table test and finite-element analysis. Results of this study indicate that the numerical model built to simulate two-tier container stack dynamics is a promising tool for further studies. Moreover, the model is able to predict conditions close to real situations faced by container stacks while stored on deck.