城市轨道交通盾构同步注浆国内外现状及发展

同步注浆工艺作为盾构施工中的重要环节,其注浆效果对盾构掘进中的沉降控制与及时包裹管片起到重要作用。针对壁后同步注浆的作用进行分析,系统总结同步注浆浆液类型与要求,对比分析3种常用浆液优缺点,结合工程实际需求探讨浆液需求及发展方向。统计国内已建35个地铁盾构施工案例,分析地铁施工采用盾构机类型及管片尺寸,简要分析盾构隧道同步注浆中的热点问题并展开讨论。研究结果表明:浆液种类需根据地层条件进行选取,国内盾构隧道施工过程同步注浆采用单液浆(惰性浆液、可硬性浆液)较多,盾构隧道施工同步注浆双液浆开始逐渐推广,国外盾构隧道施工同步注浆已逐渐向双液浆转变;壁后注浆准确探测与评价对于注浆效果的反馈与地层变形敏感地区至关重要,相关研究有待进一步加强;在含水量大于30%的地层、渗透性极高地层、软弱不均地层且周围近距离穿越建(构)筑物,对沉降控制要求较高的工程中,建议采用双液浆同步注浆施工或辅以克泥效特殊浆液进行施工。     

Estimation of delay variability at signalized intersections for urban arterial performance evaluation

Urban arterial performance evaluation has been broadly studied, with the major focus on average travel time estimation. However, in view of the stochastic nature of interrupted flow, the ability to capture the characteristics of travel time variability has become a critical step in determining arterial level of service (LOS). This article first presents a stochastic approach that integrates classic cumulative curves and probability theories in order to investigate delay variability at signalized intersections, as a dominant part of the link travel time variability. This serves as a basis for arterial travel time estimation, which can be obtained through a convolution of individual link travel time distributions. The proposed approach is then applied in the estimation of travel time along one arterial in Shanghai, China, with abundant automatic vehicle identification (AVI) data sources. The travel time variability is evaluated thoroughly at 30-min intervals, with promising results achieved in comparison to the field measurements. In addition, the estimated travel time distributions are utilized to illustrate the probability of multiple LOS ranges, namely, reliability LOS. The results provide insights into how we might achieve a more reliable and informative understanding of arterial performance.     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

京珠高速公路隧道病害检测与处治对策研究

通过京珠高速公路隧道病害现场检测,对其主要病害进行了分类统计。考虑该隧道的勘察、设计、施工等因素影响,对该隧道主要病害产生原因进行了分析,在此基础上,对隧道病害等级进行了判定,并针对不同等级病害,提出了具体的处治措施。     

基于LabVIEW的“海院1号”波浪发电平台浮筒取能效率数据采集系统设计

浮筒取能效率测试是波浪发电平台研究的重要组成部分。传统的测试系统不但测量精度低,而且自动化程度低、操作复杂。为此,该文基于“海院1号”波浪发电平台,采用虚拟仪器LabVIEW软件开发了浮筒取能效率数据采集系统。文中介绍了“海院1号”波浪发电平台及其浮筒,进行了测试系统的设计,实现了浮筒取能效率测试的数据采集、数据管理、曲线拟合及绘制、生成报表、信号分析以及数据处理等工程。对实际运行效果进行分析,结果表明该系统具有精度高、运行稳定可靠、自动化程度高、人机界面友好以及操作简单等特点,具有重要的工程实践意义。     

基于速度系数法的离心泵叶轮优化设计

离心泵在水力设计中应保证达到设计参数的要求,有较高的水力效率和良好的汽蚀性能.以离心泵水力设计的速度系数法为前提,应用机械优化设计的方法,以离心泵的效率和汽蚀性能为优化目标建立了离心泵叶轮的优化设计模型,并通过实例计算证明了该方法是切实可行的.     

从阶层、空间、交通互动视角解读交通规划

现行的交通规划理论基于均质化假设,并未充分考虑社会阶层以及不同阶层在职住关系、出行自由度方面的差异.城市交通发展中日益明显的设施错配、方式错配问题反映了特定阶层的交通需求与交通供给的不匹配.首先,梳理阶层、空间、交通三因素之间的关系,三者的不协调导致了设施错配和交通贫困,反映出交通规划和管理中存在"空间弱区"和"政策弱...     

车辆电磁制动方案刍议

结合机车车辆制动系统的运行情况,对电磁制动系统进行了初步探讨.提出了两种电磁制动方案:单电磁铁失电制动和双电磁铁得电制动.方案能够初步解决电磁制动系统中的一些技术难点,如减轻闸瓦间隙消除过程中闸瓦与车轮间的机械碰撞、电磁力的计算与控制、制动力的放大与传递等.     

Subjective well-being and travel: retrospect and prospect

Although the improvement of well-being is often an implicitly-assumed goal of many, if not most, public policies, the study of subjective well-being (SWB) and travel has so far been confined to a relatively small segment of the travel behavior community. Accordingly, one main purpose of this paper is to introduce a larger share of the community to some fundamental SWB-related concepts and their application in transportation research, with the goal of attracting others to this rewarding area of study. At the same time, however, I also hope to offer some useful reflections to those already working in this field. After discussing some basic issues of terminology and measurement of SWB, I present from the literature four conceptual models relating travel and subjective well-being. Following one of those models, I review five ways in which travel can influence well-being. I conclude by examining some challenges associated with assessing the impacts of travel on well-being, as well as challenges associated with applying what we learn to policy.

     

路面沥青复合料基于孔隙水压力损坏的实验分析探究

集料-沥青界面强度实验,集料-沥青界面黏合机能影响要素分析,孔隙水压对沥青复合料的损坏原理。本研究经过界面拉拔实验,分析沥青老化、温度和水分等要素对集料-沥青界面黏合机能的影响,探讨车辆载荷作用下孔水压对集料-沥青黏合机能的影响及损坏原理,以为同类沥青复合料路面工程应用提供研究和技术参考。