B样条隶属函数的模糊神经网络研究

把模糊子集的隶属函数取为B样条函数,利用B样条函数的正定性,紧密性和归一性,可以使得通常模糊系统输出中的分母削去,并且训练过程中权值的调整也限制在局部范围内。最后证明了其全局逼近特性。     

随机不平路面上的汽车强化试验研究

本文讨论了由载荷功率谱估算强化系数的方法,还研究了路面平整度、路面铺装和行驶车速等试验条件因素对汽车强化试验的影响,发现只有试验车速与实际使用常用车速接近,才能保证汽车构件上的载荷功率谱与实际使用相似。     

货车驾驶室结构动力模型修改

本文利用货车驾驶室的测试模态参数来修正其有限元动力分析模型。文中主要论述货车驾驶室模态参数识别、动力分析模型单元组合修正法和货车驾驶室动力模型修改。     

再生性原料在汽车上的应用

本文以联邦德国农业及经济状况为出发点，介绍了利用生物制品，主要是粮食，油料等农产品转化为发动机燃料的研究工作情况，并重点介绍了用菜籽油和酒精的试验研究情况。     

Effect of Traction Force Distribution Control on Vehicle Dynamics

The purpose of this study is to clarify vehicle dynamics effected by traction force distribution, not only between the front and rear wheels but also between the left and right wheels. Contribution of traction force distribution to vehicle turning performance was investigated using a mathematical simulation and an experimental vehicle. The results indicates that the control of traction control distribution between the left and right wheels greatly influences vehicle turning characteristics and improve the performance even in a marginal turning condition.     

自动化滴灌管理技术在高速公路环境建设中的应用初探

滴灌是目前世界上最先进的节水灌溉技术之一。在高速公路环境建设中采用滴灌技术 ,具有显著的安全、经济、高效、自动化等优点。但现有的自动化滴灌技术如果用于高速公路 ,成本较为高昂。本文以陕西省西渭高速公路为例 ,介绍了一种专门针对公路设计的自动化滴灌系统 ,用固化参数和智能阀替代自动化电路 ,造价仅为现有自动化滴灌工程成本的 1 0 % ,管理达到自动化水平。     

Vehicle Motion Analysis in Relation to Vehicle Safety

The influence of vehicle handling on the possible avoidance of accident situations is discussed. lit is shown that accident reconstruction at present does not provide the necessary information to relate the cause of accidents to the lack of road worthiness of vehicles. It follows that the vehicle behavior in proximity of its performance limit must be determined in order to infer its accident avoidance potential.

The paper presents a review of the state-of-the-art of vehicle modeling, simulation of vehicle maneuvers and full scale testing. The application of the direct method of the stability theory is suggested as a possible means of obtaining performance limit envelopes which are necessary for establishing standards of the performance of vehicles.     

Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans

A hybrid electric vehicle (HEV) is a vehicle that combines a conventional propulsion system with an on-board rechargeable energy storage system to achieve better fuel economy than a conventional vehicle HEVs do not have limited ranges like battery electric vehicles, which use batteries charged by an external source. The different propulsion power systems may have common subsystems or components. The objective of this study is to compare the fuel economies of a conventional step van, a series hybrid electric step van (HESV), and a parallel HESV by calculating the fuel consumption using the ADVISOR software by NREL. We also showed the results of the vehicles in different driving cycles including the Central Business District bus cycles, the New York City Cycle, and the US EPA City and Highway cycles.     

Development of an intelligent CAE system for auto-body concept design

The concept design phase is a critical step in auto-body design, as it has a great effect on later design work. This paper describes the implementation of an auto-body structure design in the early stages of a new auto-body developing program. In order to reduce the long design period and analysis error that plagues traditional auto-body concept design, an intelligent CAE system has been successfully developed and implemented based on the UGS NX/API opening platform. This system, the so-called ACD-ICAE (Auto-body concept design-intelligent computer aided engineering) System that means concept design-intelligent computer aided engineering system, employs a fully parametrized template method to build the conceptual auto-body geometry model and FEM model quickly and easily. It also integrates auto-body modeling, analysis and optimization on only one CAD platform via a parametric variables database. Moreover, all parametric variables are shared and updated in different phases of the ACD-ICAE System. A wizard User Interface (UI) based on knowledge of auto-body engineering was developed and used in this system. The procedures implementing the functional diagram of the ACD-ICAE system are also provided. A typical example of a car body concept design with four doors shows that the ACD-ICAE system is efficient and accurate.     

基于VISSIM微观仿真的错位交叉口改善策略

错位交叉口是一种特殊的平面交叉口,由于其自身特性,严重影响了交叉口的通行能力和行车安全。通过对错位交叉口的研究提出相应的改善策略,对提高交叉口的通行能力和行车安全具有非常重要的意义。利用微观交通仿真软件VISSIM的模拟和预测功能,对淄博市人民路与西六路错位交叉口进行仿真分析,结合组群城市中心城区的实际情况,提出多个微观改善策略,具有一定的现实意义。