Loosening analysis for fastening screw of automotive door trim parts

While a screw is a fastening element that can tighten the two parts at low cost, the loosening of the screw is generated due to external forces such as repetitive load, vibration, and thermal stress. This phenomenon decreases the initial clamping force, and this can be a serious problem to the safety of the product. However, while fastening parts are handled through experiment and experience, there is a lack of research on the screw loosening of plastic fastening parts. For example, vehicles have various fastening parts. Among the fastening elements, screws are typically used for tightening parts of the vehicle door trim. Vehicle interior materials are mainly composed of plastic parts. Especially, the temperature of the vehicle interior changes from a sub-zero temperature to 100 degrees (°C) due to solar radiation. Unlike metals, plastic materials are commonly susceptible to the environment. In this study, the fastening screw of automotive door trim parts is selected. First, a screw loosening mechanism is implemented through Computer Aided Engineering (CAE) analysis and the influences of degradation are then analyzed. Secondly, the selecting method of clamping force is suggested through the analysis result of reduction according to the tightening torque.     

Effect of radial interference on torque capacity of press- and shrink-fit gears

Some gears in an automobile transmission have to be mounted by being press-fitted on a shaft instead of splines. The torque capacity of the press-fitted gear will be proportional to the radial interference. The excessive interference, however, will increase the gear radial deformation. In this paper, the press- and shrink-fit and the subsequent torque capacity test were investigated by finite element analysis, theoretically and experimentally. The static and dynamic coefficient of friction were determined.     

Grille design for passenger car to improve aerodynamic and cooling performance using CFD technique

Grille opening shape for small passenger car is designed numerically by using parametric study. Key geometric parameters to design a grille opening configuration are represented by vertical height, horizontal width, size, linear deformation, position, and blockage. Numerical study investigates the effects of those key parameters on the aerodynamic drag and the grille inlet flow rate, which are very important to the aerodynamic performance as well as the powertrain cooling performance of the car. Flow simulations are performed at the velocity of 110 km/h inflow condition. The outflow boundary condition is implemented by pressure outlet condition of atmospheric pressure. Moving wall condition of 110 km/h is set on the ground.     

Angular position error detection of variable reluctance resolver using simulation-based approach

The variable reluctance type resolver is widely used in an electric motor for hybrid electric vehicles as a rotor position sensor. The purpose of this paper is to present a simulation-based approach capable of determining a more accurate rotor shape of variable reluctance resolver in order to cut the time and cost of its development before testing a physical prototype. For the verification of the simulation-based approach to the position error detection of rotor, experiments for 8XVR resolver were conducted. Based on this approach, an optimal salient-pole rotor shape of 4X-VR resolver is proposed.     

Gasoline multiple premixed compression ignition (MPCI): Controllable, high efficiency and clean combustion mode in direct injection engines

A novel combustion concept namely “multiple premixed compression ignition” (MPCI) in gasoline direct injection compression ignition (GDICI) regime is proposed. Its predominant feature is the first premixed and followed quasipremixed combustion processes in a sequence of “spray-combustion-spray-combustion”. The multiple-stage premixed combustion decouples the pressure rise with pollutants formation process, which means the pressure rise rate and emissions can be reduced simultaneously, while achieving a high thermal efficiency. The gasoline MPCI mode has been demonstrated in a research engine with a compression ratio of 18.5. Gasoline with the research octane number (RON) of 94.4 was tested under 1400 rpm, 0.6 MPa IMEP conditions, without EGR and intake boosting. A parameter study of common rail pressure and intake temperature was implemented to investigate their effects on the performance of MPCI mode. Compared to the single-stage diffusion combustion in traditional diesel engines, the gasoline MPCI mode achieves lower emissions of soot, NO, CO, as well as slightly higher indicated efficiency, with a penalty of higher THC emissions when the common rail pressure is larger than 80 MPa in this study. With intake temperature sweeping, the gasoline MPCI mode also has the foregoing advantages compared to the diesel under the same operating conditions.     

Field tests for evaluating cooperative intersection signal violation warning system (CISVWS)

This paper demonstrates the results of field tests for assessing a cooperative intersection signal violation warning system (CISVWS), which consists of (a) hardware, including an in-vehicle warning device, roadside antenna, and traffic signal controller, and (b) software to operate and test the cooperative system through vehicle to infrastructure (V2I) communication systems. Field tests were performed under real traffic situations in order to test the system in terms of the initiation time of the signal violation warning from the signal controller, the activation and duration of on board equipment (OBE), and the warning delay based on the relationships between distance variables, including the safe stopping distance, and the location of road side equipment (RSE). Findings from the field test at the real-world signalized intersection sites indicated that the system would be capable of reducing red light violations and intersection collisions through use of the in-vehicle warning device at signalized intersections.     

轨道运输噪音改善研析与对策——以台北捷运地下隧道为例

台湾因人口集中都会区且道路年增率远不及车辆年增率,形成都会区内及城际道路交通日益频繁与拥塞,台湾目前陆运交通主流与世界趋势相同,主要以轨道运输系统为陆运交通主要解决方案,同时近年来在降低环境污染及增加能源使用效能之呼声下,更使得铁路运输亦再度成为最佳解决方案.近年来台北捷运系统中和线古亭站穿越民房下方潜盾隧道段、维修线中华路区段及板桥线西门站至龙山寺站地下隧道,沿线接获越来越多居住其上的居民对振动噪音污染生活质量之抱怨与不满,同时因民众环保意识的日渐抬头,民众对捷运行驶的噪音愈来愈不能忍受,噪音陈情的地点也愈来愈多,目前虽采取许多改善措施,但似乎不能满足沿线居民的需求.此篇论文即针对轨道运输系统中台北捷运地下隧道分轨道噪音之成因进行分析,并经分析评估,拟定出各轨道噪音案在地下隧道的防治对策,并对部分防治对策做-长期监测,并对部分监测数据进行初步分析比对,厘清对策与成因在理论上及实务上之成效比对,从而进行设计上之回馈,以提供轨道运输在环境噪音防治之最佳方案.     

Experimental study on macroscopic spray characteristics after impingement in a slit-type GDI injector

In this paper, an experimental study on the wall-impinging spray of the slit-type GDI injector is presented. To examine the effects of various factors on the development of a spray impinging on the wall, experiments were conducted at various injection pressures, ambient pressures, wall distances from the injector tip, wall temperatures, and wall inclination angles. Behavior of the impinging spray was visualized using a planar laser scattering method. It is shown that the spray path penetration of the wall-impinging spray increases with increases in injection pressure, wall distance, wall temperature, or wall angle. On the other hand, the spray path penetration of the wall-impinging spray decreases with increases in ambient pressure. The predicted spray path penetration calculated by the empirical equation estimates the spray path penetration in all cases, and the empirical equation is optimized for the total injection pressure.     

Investigation on the flow and heat transfer characteristics of diesel engine EGR coolers

An important goal in diesel engine research is the development of a means to reduce the emissions of nitrogen oxides (NOx). The use of a cooled exhaust gas recirculation (EGR) system is one of the most effective techniques currently available for reducing nitrogen oxides. Since PM (Particulate Matter) fouling reduces the efficiency of an EGR cooler, a tradeoff exists between the amount of NOx and PM emissions, especially at high engine loads. In the present study, we performed engine dynamometer experiments and numerical analyses to investigate how the internal shape of an EGR cooler affects the heat exchanger efficiency. Heat exchanger efficiencies were examined for plain and spiral EGR coolers. The temperature and pressure distributions inside these EGR coolers were obtained in three dimensions using the numerical package program FLUENT.     

Experimental investigation and comparison of nanoparticle emission characteristics in light-duty vehicles for two different fuels

In recent years, particle number emissions rather than particulate mass emissions in automotive engines have become the subject with controversial discussions. Recent results from studies of health effects imply that it is possible that particulate mass does not properly correlate with the variety of health effects attributed to engine exhaust. The concern is now focusing on nano-sized particles emitted from I. C. engines. In this study, particulate mass and particle number concentration emitted from light-duty vehicles were investigated for a better understanding of the characteristics of the engine PM from different types of fuels, such as gasoline and diesel fuel. Engine nano-particle mass and size distributions of four test vehicles were measured by a condensation particle counter system, which is recommended by the particle measurement program in Europe (PMP), at the end of a dilution tunnel along a NEDC test mode on a chassis dynamometer. We found that particle number concentrations of diesel passenger vehicles with DPF system are lower than gasoline passenger vehicles, but PM mass has some similar values. However, in diesel vehicles with DPF system, PM mass and particle number concentrations were greatly influenced by PM regeneration. Particle emissions in light-duty vehicles emitted about 90% at the ECE15 cycle in NEDC test mode, regardless of vehicle fuel type. Particle emissions at the early cold condition of engine were highly emitted in the test mode.