Modeling research on manufacturing execution system based on large-scale system cybernetics

A cybernetics model of manufacturing execution system(MES CM) was proposed and studied from the viewpoint of cybernetics.Combining with the features of manufacturing system, the MES CM was modeled by"generalized modeling"method that is discussed in large-scale system theory.The mathematical model of MES CM was constructed by the generalized operator model, and the main characteristics of MES CM were analyzed.     

肋骨侧向稳定性特征屈曲有限元分析

环肋圆柱壳通常在周向布置肋骨来提高其稳定性,在深水压力作用下,肋骨发生侧向失稳的可能性加大,进而影响环肋圆柱壳的整体稳定性。在理论分析的基础上,采用有限元法对环肋圆柱壳进行在静水压力和轴向压力作用下的特征屈曲分析,研究肋骨侧向失稳的屈曲特征,得到肋骨侧向失稳的判别方法,为工程设计提供参考。     

高频PWM波反射对电机端过电压的影响

本文采用波理论分析变频驱动系统中高频PWM波反射,采用MATLAB仿真软件搭建软件模型,分析变频器输出电压波形的上升下降时间、供电电缆的长度、供电电缆分布参数及系统负载大小对电机前端过电压产生的影响,总结出高频PWM波反射对电机端过电压的影响。     

XZJ6700轻型客车人机系统光环境质量模糊综合评价

针对影响人机系统光环境质量的诸多模糊信息和模糊因素,提出了运用模糊学理论评价人-机-环境系统的光环境质量的方法。通过对XZJ6700轻型客车车室环境质量的二级模糊综合评判,证明这种方法能够定性、定量地对人机系统的光环境质量进行综合评价,克服了问卷调查法只能定性地判别人机系统光环境质量的缺陷。     

双动提速道岔SFJF迂回自闭电路的成因及解决方案

在现场排查中发现2/4道岔SFJF存在迂回电路,易造成道岔SFJF错误自闭.为此,通过对2/4双动提速道岔控制电路原理的深入分析,提出解决方案的建议及道岔联锁试验时的注意事项,对防止双动提速道岔联锁失效,具有一定的借鉴.     

中欧规范T梁上部结构对比研究

各国规范均为一套系统且复杂的体系,难以用简化的分析方法进行全面的对比.对比规范的安全度,需要从作用效应和抗力效应两个方面综合考虑.作用效应需要进行不同状态的荷载组合以得到结构的组合内力,抗力效应需要考虑承载能力状态、正常使用极限状态(抗裂要求、混凝土压应力要求、刚度要求等).而桥梁结构的形式多样,汽车荷载的布置也存在很...     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

Using a SVM to evaluate damage to vibration isolators in an elastic raft system

Predicting damage to vibration isolators in a raft experiencing heavy shock loadings from explosions is an important task when designing a raft system. It is also vital to be able to research the vulnerability of heavily shocked floating rafts unreliable, especially when the allowable values The conventional approach to prediction has been or ultimate values of vibration isolators of supposedly uniform standard in a raft actually have differing and uncertain values due to defective workmanship. A new model for predicting damage to vibration isolators in a shocked floating raft system is presented in this paper. It is based on a support vector machine（SVM）, which uses Artificial Intelligence to characterize complicated nonlinear mapping between the impacting environment and damage to the vibration isolators. The effectiveness of the new method for predicting damage was illustrated by numerical simulations, and shown to be effective when relevant parameters of the model were chosen reasonably. The effect determining parameters, including kernel function and penalty factors, has on prediction results is also discussed. It can be concluded that the SVM will probably become a valid tool to study damage or vulnerability in a shocked raft system.     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.