Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Fuzzy-logic applied to yaw moment control for vehicle stability

In this paper, we propose a new yaw moment control based on fuzzy logic to improve vehicle handling and stability. The advantages of fuzzy methods are their simplicity and their good performance in controlling non-linear systems. The developed controller generates the suitable yaw moment which is obtained from the difference of the brake forces between the front wheels so that the vehicle follows the target values of the yaw rate and the sideslip angle. The simulation results show the effectiveness of the proposed control method when the vehicle is subjected to different cornering steering manoeuvres such as change line and J-turn under different driving conditions (dry road and snow-covered).     

大庆至广州高速公路河北段路线优化中

大广高速公路河北段路线长,地质条件十分复杂,在工程前期设计中通过对路线的优化,很好地解决了地基处理问题和环境保护问题,值得同行借鉴。     

露石水泥混凝土路面关键技术研究

研究了露石水泥混凝土路面铺筑过程中必然要遇到的材料选择、冲洗时间、成熟度、双层铺筑混凝土强度等关键技术问题,分析了冲洗时间、成熟度的主要影响因素,发现温度越高,冲洗时间越早,最早冲洗时间与最迟冲洗时间有较大的间隔,常温下可达十多个小时,温度升高,间隔减小,成熟度随温度的升高而增大,相隔一定时间分两层振捣的水泥混凝土试件强度与一次振捣的水泥混凝土试件强度基本相同。结果表明:成熟度指标、试验法是评价、检测露石工艺性质的有效手段,两层铺筑方法是降低此种路面成本的有效途径。     

理解消费者对质量的定义

汽车产品的质量总是会受到巨大的关注。质量较差会导致财务成本的增加,这使得制造商把提升质量作为一项商业必要的手段。过去的数年中有无数方法和流程被用来减少浪费和消除缺陷 (比如6-Sigma法和TQM完全质量管理法)。我们并不缺少这样的衡量工具,来衡量因质量问题和返工而产生的负面经济效益。运用这些衡量工具能够理解质量对每辆车或者公司的盈利能力造成的影响,并且帮助公司取得显著的产品质     

运用车辆动态模拟装置提高东海道新干线列车的乘坐舒适性

介绍了车辆动态模拟装置在评价车辆乘坐舒适性方面的应用情况,并阐述了车辆动态模拟装置在车辆部件研发过程中的重要作用.     

Exploring the impact of walk–bike infrastructure,safety perception,and built-environment on active transportation mode choice: a random parameter model using New York City commuter data

This study estimates a random parameter (mixed) logit model for active transportation (walk and bicycle) choices for work trips in the New York City (using 2010–2011 Regional Household Travel Survey Data). We explored the effects of traffic safety, walk–bike network facilities, and land use attributes on walk and bicycle mode choice decision in the New York City for home-to-work commute. Applying the flexible econometric structure of random parameter models, we capture the heterogeneity in the decision making process and simulate scenarios considering improvement in walk–bike infrastructure such as sidewalk width and length of bike lane. Our results indicate that increasing sidewalk width, total length of bike lane, and proportion of protected bike lane will increase the likelihood of more people taking active transportation mode This suggests that the local authorities and planning agencies to invest more on building and maintaining the infrastructure for pedestrians. Further, improvement in traffic safety by reducing traffic crashes involving pedestrians and bicyclists, will increase the likelihood of taking active transportation modes. Our results also show positive correlation between number of non-motorized trips by the other family members and the likelihood to choose active transportation mode. The model would be an essential tool to estimate the impact of improving traffic safety and walk–bike infrastructure which will assist in investment decision making.     

Fully autonomous vehicles: analyzing transportation network performance and operating scenarios in the Greater Toronto Area,Canada

Fully autonomous vehicles (AVs) have the potential to considerably change urban mobility in the future. This study simulates potential AV operating scenarios in the Greater Toronto Area (GTA), Canada, and assesses transportation system performance on a regional level. For each scenario, the base capacities of certain types of road links are modified to simulate the theoretical increase in throughput enabled by AV driving behavior. Another scenario examines driverless parking operations in downtown Toronto. Simulation results indicate that the increased attractiveness of freeways relative to other routes leads to slightly increased average travel distance as vehicles divert to access higher capacity road links. Average travel time is found to decrease by up to one-fifth at the 90% AV market penetration level. Concurrently, localized increases in congestion suggest that proactive transportation planning will be needed to mitigate negative consequences of AV adoption, especially in relation to induced demand for personal automobile travel.     

New potential for multimodal connection: exploring the relationship between taxi and transit in New York City (NYC)

Transportation - Taxi trips have been somewhat neglected in transportation mobility and multimodal connection studies. The socio-demographic characteristics of taxi riders are often not fully...     

Applying the theory of reasoned action to understanding consumers’ intention to adopt hybrid electric vehicles in Saudi Arabia

To satisfy the global energy demand while accommodating the rapidly increasing consumption rate in its domestic market, Saudi Arabia must develop and implement fuel efficiency programs in many sectors. In the transportation sector, which is a major contributor to fuel consumption and emissions, hybrid electric vehicles (HEVs) could provide a viable solution, but they are not yet available in the Saudi market. Applying the theory of reasoned action (TRA) and an online questionnaire instrument (N = 847), this paper aims to identify the factors that could drive Saudi citizens’ intention to adopt such technology. We find that the TRA is appropriate to describe intention to adopt HEVs in the Saudi context, and that both subjective norms and attitudes are significant in explaining Saudi consumers’ intention, with subjective norms having three times as strong an effect as attitudes. The findings should be useful to relevant Saudi government officials as they develop and implement transportation-related initiatives and policies, as well as to global auto manufacturers and dealers seeking to tap into Saudi Arabia’s prospective HEV market.