Theoretical,experimental and numerical investigations into nonlinear motion of a tethered-buoy system

In this paper, we discuss nonlinear motion of a buoy connected vertically to the seabed via a tensioned tether (tethered-buoy). A series of scaled model tests has been conducted and a significant nonlinear behavior of the buoy motion, sub-harmonic motion in particular, is observed. Taking account of the influence of time-varying tether tension on the buoy motion, theoretical explanation is made for the sub-harmonic response. The stability of the tethered-buoy system is focused based on Mathieu instability theory. A strongly coupled numerical model between the buoy motion and the tether behavior is established to clarify the mechanism of the nonlinear motion of the tethered-buoy system. A comparison between the experiment data and simulation results is presented not only for the linear but also for the sub-harmonic components. Influential factors for the sub-harmonic motion are discussed in detail. It turned out that the sub-harmonic motion is dominated by the nonlinear coupling effect of time-varying tension in the tether with the buoy motion. Finally, the influential factors to the sub-harmonic motion are indicated throughout the comparison between two different buoy models.     

A study on TLP hull sizing by utilizing optimization algorithm

This paper reports a study on hull sizing for tension leg platforms (TLPs) using an optimization model. At the conceptual or basic design stage of an offshore platform project, hull sizing is one of the most important tasks, having a great impact on later stages of the project. Hull sizing is usually done by an engineering team combining several disciplines and taking account of factors including hydrodynamics, global performance, stability, and structure. This makes it difficult and time-consuming to optimize the hull dimensions. In this study, hull sizing was modeled as an optimization problem in which a range of design criteria had to be satisfied and an objective function minimized. Sizing was then performed using optimization algorithms. For each module, the result calculated by our method was compared with that produced by commercial software (DNV Sesam). Our system was tested for conventional TLP design in three specific metocean environments. Finally, our optimized hull shape was compared with an existing TLP, and the difference in hull shape demanded by each environment was analyzed.     

Tracking control of underwater vehicle subject to uncertainties using fuzzy inverse desired trajectory compensation technique

Computed-torque controller plus fuzzy inverse desired trajectory compensation technique based on robust adaptive fuzzy observer is proposed to control underwater vehicle subject to uncertainties. A fuzzy inverse desired trajectory compensator is developed as a nonlinear filter at input trajectory level outside the control loop to address the issue of unavailable normalizing factor. A robust adaptive state observer with loose constraint on the position of the uncertainty function is proposed to evaluate the unavailable states. Numerical simulation results of regulation performance demonstrate that the observer solves the problem of strict constraint conditions on position uncertainties. Comparisons of tracking performance between the proposed control method and computed-torque controller are performed. The results confirm that compensation at the input trajectory offers better position tracking performance and easier practical implementation than other fuzzy compensation techniques at joint torque level. The proposed control approach is simulated and its efficiency is validated through the simulation of an underwater vehicle.     

Use of diesel engine and surface-piercing propeller to achieve fuel savings for inshore fishing boats

Fishing is a major local industry in Malaysia, particularly in rural areas. However, the rapidly increasing price of fuel is seriously affecting the industry’s viability. At present, outboard petrol engines are the preferred choice for use in small-scale fishing boats because they deliver the advantages of high speed and low weight, they are easy to install, and they use minimal space. Petrol outboard engines are known to consume a greater amount of fuel than inboard diesel engines, but installing diesel engines with conventional submerged propellers in existing small-scale fishing boats is not economically viable because major hullform modifications and extra expenditure are required to achieve this. This study describes a proposal to enable reductions in fuel consumption by introducing the combined use of a diesel engine and surface-piercing propeller (SPP). An analysis of fuel consumption reduction is presented, together with an economic feasibility study. Resulting data reveal that the use of the proposed modifications would save 23.31 liters of fuel per trip (40.75 %) compared to outboard motors, equaling annual savings of RM 3962 per year.     

Broaching prediction in the light of an enhanced mathematical model,with higher-order terms taken into account

 We have attempted to develop a more consistent mathematical model for capsizing associated with surf-riding in following and quartering waves by taking most of the second-order terms of the waves into account. The wave effects on the hull maneuvring coefficients were estimated, together with the hydrodynamic lift due to wave fluid velocity, and the change in added mass due to relative wave elevations. The wave effects on the hydrodynamic derivatives with respect to rudder angles were estimated by using the Mathematical Modelling Group (MMG) model. Then captive ship model experiments were conducted, and these showed reasonably good agreements between the experiments and the calculations for the wave effects on the hull and the rudder maneuvring forces. It was also found that the wave effects on restoring moments are much smaller than the Froude–Krylov prediction, and the minimum restoring arm appears on a wave downslope but not on a wave crest amidship. Thus, an experimental formula of the lift force due to the heel angle of the ship is provided for numerical modelling. Numerical simulations were then carried out with these second-order terms of waves, and the results were compared with the results of free-running model experiments. An improved prediction accuracy for ship motions in following and quartering seas was demonstrated. Although the boundaries of the ship motion modes were also obtained with both the original model and the present one, the second-order terms for waves are not so crucial for predicting the capsizing boundaries themselves. Received: June 20, 2002 / Accepted: October 10, 2002 Acknowledgments. This research was supported by a Grant-in-Aid for Scientific Research of the Ministry of Education, Culture, Sports, Science and Technology of Japan (No. 13555270). The authors thank Prof. N. Rakhmanin of the Krylov Ship Research Institute for providing the Russian literature, as well as Mr. H. Murata of NHK (Japan Broadcasting Corporation) for translating it into Japanese. Address correspondence to: N. Umeda (e-mail: umeda@naoe.eng.osaka-u.ac.jp)     

Model and algorithm for container ship stowage planning based on bin-packing problem

In a general case, container ship serves many different ports on each voyage. A stowage planning for container ship made at one port must take account of the influence on subsequent ports. So the complexity of stowage planning problem increases due to its multi-ports nature. This problem is NP-hard problem. In order to reduce the computational complexity, the problem is decomposed into two sub-problems in this paper. First, container ship stowage problem （CSSP） is regarded as “packing problem”, ship-bays on the board of vessel are regarded as bins, the number of slots at each bay are taken as capacities of bins, and containers with different characteristics （homogeneous containers group） are treated as items packed. At this stage, there are two objective functions, one is to minimize the number of bays packed by containers and the other is to minimize the number of overstows. Secondly, containers assigned to each bays at first stage are allocate to special slot, the objective functions are to minimize the metacentric height, heel and overstows. The taboo search heuristics algorithm are used to solve the subproblem. The main focus of this paper is on the first subproblem. A case certifies the feasibility of the model and algorithm.     

Hydrodynamics study of a BCF mode bioinspired robotic-fish underwater vehicle using Lighthill’s slender body model

This paper investigates the hydrodynamic characteristics of the rectilinear motion of a robotic fish underwater vehicle. This 2-joint, 3-link multibody vehicle model is biologically inspired by a body caudal fin carangiform fish propulsion mechanism. Navier–Stokes equations are used to compute the unsteady flow fields generated due to the interaction between the vehicle and the surrounding incompressible and Newtonian fluid (water) environment. The NACA 0014 airfoil aerodynamic profile has been designed to boost the swimming efficiency by reducing drag as the vehicle undergoes an undulatory/oscillatory motion. Using the Lighthill slender body model, a traveling wave mathematical function is defined to undulate the robotic fish posterior (caudal) region while the motion tracking is carried out by dynamic meshing technique. The results obtained show that though the net lift force approaches to zero, the net thrust or negative drag coefficient maintains a finite value dependent on kinematic parameters like tail beat frequency (TBF) and amplitude span (AS) at a given propulsive wavelength and the forward velocity of the vehicle. The results reveal the effects of TBF and AS on the coefficient of drag friction and the thrust force. Drag coefficients obtained from the simulations are compared and validated with the experimental results. The hydrodynamic results are found to be similar to the kinematic study results and suggest that TBF and AS play the most effective roles in the bioinspired propulsion technique. Relation of these parameters with propelling thrust force and forward velocity is also in conjunction over a given range of TBF and AS values.     

Study of station and attitude maneuver of submergence rescue vehicle

It is an important control process to operate motion of an submergence rescue vehicle(SRV). Seeing that the motion of the submergence rescue vehicle is special, it is necessary to employ non-linear predictive control system. For this reason, continuous dynamic performance of the system, the logical components and the operative restraints are expressed as the non-linear equations of state with the inequality restraints, and the model principle of hybrid system is introduced. The conclusion shows that it comes true to exactly control position and attitude of the SRV by means of non-linear model predictive control. The test in a model basin has also proved that the above methods are efficient.     

The effect of sloshing on the sway motions of 2D rectangular cylinders in regular waves

In this paper, we investigated the effect of sloshing on the sway motions of two-dimensional rectangular cylinders in regular waves, bearing in mind possible applications for LNG-FPSO and LNG-FSRU. First, we carried out experiments for two models with different drafts, or the same draft but different filling ratios, in which the models were firmly connected to each other. The sway motion was measured with a noncontact video camera. This is an extension of Rognebakke and Faltinsen’s work for a single model (J Ship Res 47(3):208–221, 2003). It was found that the sway motion became small when the incident wave frequency was close to the lowest natural frequency of each model. The sway motion greatly increased when the wave frequency was higher than this frequency. The measured data were compared with numerical results obtained by a single-dominant multi-modal method; relatively good agreement was noted. However, the numerical results deviated from the experimental results near the lowest natural frequency of the smaller model, which was believed to be due to overturning waves, as observed during the experiment. Since this is out of the valid range for the single-dominant multi-modal method, other, more appropriate, methods such as the multi-dominant modal method must be applied instead.     

Risk factors and theory building: a study to improve passenger vessel safety

Given the inherent complexity of the maritime transportation system, developing effective policy can be challenging. Using risk factors identified by an elicitation and aggregation of expert judgment, a relative-risk rating scheme was developed in the theory-building tradition of the social sciences. The model was empirically evaluated using 18 months of data from the US small passenger vessel sector. The model identified that the top 10% of relatively highest risk vessels accounted for 50% of all marine casualties during the period of examination. A policy for deploying the model nationally is proposed.