船舶制造企业质量信息管理系统框架模型研究

针对船舶制造企业质量信息管理普遍存在的质量管理体系与实际生产不一致、质量信息断层和信息孤岛等问题,本文提出了一种面向产品全生命周期的质量信息管理集成方案,以质量过程控制为基础,通过规范质量信息的内容和信息传递的渠道,将大量纵横交错汇聚在产品建造过程中的既离散又相关的质量信息有机地联系起来,实现各相关部门（船东、企业内部、供应商）质量信息的透明．     

光化学蚀刻在增益发生器加工中的应用前景

增益发生器是化学激光器的关键部件之一。为了提高激光光束的质量和激光器的工作性能,本文从增益发生器的加工工艺出发,简单的介绍了传统工艺及其优势与劣势,在此基础上提出了光化学蚀刻与扩散焊结合的新工艺及其优势。重点总结了光蚀刻工艺效果的影响因素及其解决方案。     

波纹挡边带式卸船机装卸木薯干的取料头改造方案

结合木薯干的理化特性,重点阐述波纹挡边带式卸船机装卸木薯干时取料装置的几种改造方案。简要分析了不同方案的优缺点,并结合某港相关试验测试结果,给出波纹挡边带式卸船机装卸木薯干的方案选择。     

基于模糊数学理论的船体模块划分方法研究

船体结构的模块划分,是以船体结构分析为基础将它们划分成不同层次或等级,分别加以评定和计算,在此过程中存在很多具有模糊性的地方。本文将模糊数学理论应用于船体结构模块划分过程中,通过模糊聚类方法对船体结构进行模块划分,并通过多级模糊综合评判方法对其划分方案进行了验证。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

“工厂法”沉管隧道早期性能的足尺试验研究

由于沉管隧道管段体积大、结构形式复杂、施工工艺复杂,容易因温度、收缩以及约束等原因,造成管段结构在预制阶段出现危害性裂缝,进而影响结构的服役性能和耐久性能。文章依托在建港珠澳大桥沉管隧道工程实例,开展了足尺试验,对"工厂法"沉管管节关键部位的温度和应变发展实施了监测,分析对比了温度发展规律和应变发展规律。分析结果表明:在早期因混凝土水化热引起温度上升,整个管段结构膨胀受拉,温度到达峰值后逐渐下降,结构也收缩恢复;但由于混凝土自收缩等因素的存在,结构最终收缩受压。研究所提供的试验结果可作为深入进行数值分析的一个基础。     

公路隧道双洞互补式通风适用性分析

为研究公路隧道双洞互补式通风的适用性,文章基于隧址海拔和温度、隧道长度和纵坡、隧道交通量和交通组成、隧道双洞间距等因素对互补式通风负荷比及通风效果的影响进行计算分析。研究结果表明:当隧道上下行通风负荷比大于1.5或隧道单向纵坡绝对值在1.5%~2.0%之间时,适宜采用互补式通风;隧道长度在4.5~6 km之间时,采用双洞互补式通风最经济实用;交通量和交通组成的影响关系显示隧道大型车混入率在35%~50%之间时宜考虑采用互补式通风;双洞隧道适合采用互补式通风的最小间距为30 m。     

Modelling travellers’ risky choice in a revealed preference context: a comparison of EUT and non-EUT approaches

Recent work on risky choice modelling has sought to address the shortcomings of expected utility theory (EUT) by using non-expected utility theoretic (non-EUT) approaches. However, to date these approaches have been merely tested on stated choice data which is flexible and cheap. In this study, we empirically investigate the feasibility and validity of non-EUT approaches in a revealed preference (RP) context in which travel time distribution is extracted from observed historical travel time data, and subsequently present systematic comparisons between EUT, weighted utility theory, rank-dependent expected utility theory, and prospect theory (PT). The empirical evidence indicates that each non-EUT model has important behavioural insights to offer, moreover, EUT as well as non-EUT models can be applied to the RP context. However, the EUT and non-EUT model fits are generally similar with only PT providing a marginally improved model fit over EUT. The key findings presented in this study reinforce the importance of exploring non-EUT models within a revealed preference context before they can be applied reliably to modelling risky choices in the real world.     

船用控制台电磁兼容结构设计探讨

随着现代计算机网络技术和智能控制技术的不断进步,对电气控制设备箱体电磁兼容的要求越来越高。本文结合某电磁兼容控制台提出了一种电磁兼容的台体结构设计与同行探讨:设计横截面呈"U"字形及平面矩形的不锈钢框架,与碳钢材料台体壳壁门框孔处以焊接形式固定,配置电磁兼容密封材料,形成完整的电磁兼容结构。实践证明:电磁干扰测试和电磁敏感度测试符合设备正常工作要求,结构简洁,可靠性好,便于MACAD制造。