Preview suspension control for a full tracked vehicle

In this study, preview control algorithms for the active and semi-active suspension systems of a full tracked vehicle (FTV) are designed based on a 3-D.O.F model and evaluated. The main issue of this study is to make the ride comfort characteristics of a fast moving tracked vehicle better to keep an operator’s driving capability. Since road wheels almost trace the profiles of the road surface as long as the track doesn’t depart from the ground, the preview information can be obtained by measuring only the absolute position or velocity of the first road wheel. Simulation results show that the performance of the sky-hook suspension system almost follows that of full state feedback suspension system and the on-off semi-active system carries out remarkable performance with the combination of 12 on-off semi-active suspension units. The results simulated with 1^st and 2^nd weighting sets mean that the suspension system combined with the soft type of inner suspension and hard type of outer suspension can carry out better ride comfort characteristics than that with identical suspensions. The full tracked vehicle (FTV) system is uncontrollable and the system is split into controllable and uncontrollable subspace using singular value decomposition transformation. Frequency response curves to four types of inputs, such as heaving, pitching, rolling, and warping inputs, also demonstrate the merits of preview control in ride comfort. All the frequency characteristic responses confirm the continuous time results.     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

Realization of pmp-based control for hybrid electric vehicles in a backward-looking simulation

Optimal control is generally not possible without information about the future coming up, and it is not easy to obtain an optimal solution even though the information is given a priori. In this paper, a control concept based on Pontryagin’s Minimum Principle (PMP) is introduced as an efficient solution to generate an optimal control trajectory for Hybrid Electric Vehicles (HVEs) when the performance of the vehicles is evaluated on scheduled driving cycles at a simulation level. The main idea of the control concept is to minimize Hamiltonian, which is interpreted as equivalent fuel consumption, and the Hamiltonian is characterized by a co-state, which is interpreted as a weighting factor for the electrical usage. A key aspect of the control problem is that an appropriate initial condition of the co-state is required to satisfy the boundary condition of the problem. In this study, techniques to calculate the Hamiltonian in different hybrid configurations are introduced, and a methodology to look for the initial condition of the co-state is studied, so that the controller is able to realize a desired State Of Charge (SOC) trajectory. To address the issue, we utilize a shooting method with multiple initial conditions based on the concept of the Newton-Raphson method, and all these techniques are realized in a backward looking simulator. The simulation results show that the PMP-based control is a very efficient approach to produce the optimal control trajectory, and the performance is compared to the optimal solution solved by Dynamic Programming (DP).     

Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

A wheel tracking test was modelled to gain better understanding of the deflection and stress-strain distribution in an overlaid cracked pavements with and without membrane interlayer （SAMI）. For this purpose, commercial finite element software Abaqus 6.7-1 was used. Two different models were considered, one incorporating stress absorbing membrane interlayers （SAMIs） and the other without SAMI. In the study, full bond condition was assumed for the boundaries between the layers, and a linear elastic model was used for the analysis. The results show that introduction of SAMI caused greater deflection of the pavement. It is found that although with SAMIs, low stiffness is required, a very low stiffness may yield undesirable results. The results show that the introduction of SAMIs results in high strain concentration around the crack region, whilst the strain in the overlay is smaller than the values predicted in the models without SAMIs.     

两类锚泊系统在漂浮式双体浮动式波能转换装置垂荡运动状态下的性能（英文）

This work investigated the influence of two types of mooring systems on the hydrodynamic performance of a two-body floating wave energy converter(WEC). It also investigated the effects of the physical parameters of the mooring system on the amount of extractable power from incident waves in the frequency domain. The modeled converter comprised a floating body(a buoy), a submerged body with two mooring systems, and a coupling system for two bodies. The coupling system was a simplified power take-off system that was modeled by a linear spring-damper model. The tension leg mooring system could drastically affect the heave motion of the submerged body of the model and increase relative displacement between the two bodies. The effects of the stiffness parameter of the mooring system on power absorption exceeded those of the pretension tendon force.     

A study of jack-up leg drag coefficients

The accurate prediction of drag coefficients for truss-type jack-up legs is an important part of a unit's design. Over the past 14 years, a series of windtunnel tests have been conducted on both square and triangular cross-section leg configurations. A calculation method which closely fits the model test data has also been adopted. A previous paper described the early testing and the MMEC calculation method for square legs. Since then, testing and research have continued on both square and triangular leg designs. This paper describes the more recent testing performed on square legs, and it details the testing and the MMEC method for triangular legs. In addition, the effects of cornerpost design and surface roughness are discussed. Several example calculations are provided in Appendices.     

Fleet deployment optimization for liner shipping: an integer programming model

Extending and improving an earlier work of the second author, an Integer Programming (IP) model is developed to minimize the operating and lay-up costs for a fleet of liner ships operating on various routes. The IP model determines the optimal deployment of an existing fleet, given route, service, charter, and compatibility constraints. Two examples are worked with extensive actual data provided by Flota Mercante Grancolombiana (FMG). The optimal deployment is solved for their existing ship and service requirements and results and conclusions are given.     

北京市铁路噪声特性实例分析研究

通过实际测量及数据分析，认为测量现场昼夜等效声级达到 ７７７ ｄ Ｂ（ Ａ），超过了国家标准；快速列车噪声频谱分布复杂，难以治理；列车鸣笛对铁路噪声超标贡献最大，验证了铁路噪声与列车车速的关系，最后提出控制铁路噪声的建议。     

Fleet deployment optimization models.Part 2

The fleet deployment problem for the one origin,one destination fixed-price contract requiring the transport of a given total amount of cargo within a given period is formulated and solved for the case that one or more cost components are given staircase functions of time. A computer program has been developed to implement the solution of this problem. The fleet deployment problem with one or more costs being random variables with known probability density functions is also formulated. Analytical expressions for hte basic probabilistic quantities, i.e the probability density function,the mean and the variance of the total operating cost, are presented. Finally, sample results are presented and discussed and some extensions for further research are suggested.     

Planning of integrated transit network for bus and LRT

An integrated approach is suggested for the planning and evaluation of mass transport systems which includes a bus network and LRT/RTS in urban areas. This approach involves a simplified procedure for determining mass transit demand, bus route network generation and evaluation, light or rapid transit corridor identification and its patronage determination in the presence of bus networks. Scheduling of a mass transportation system based on marginal ridership concept is also suggested for a given fleet size. All the three major components (demand estimation, route network generation and scheduling) iterate and interact each other with a feedback mechanism for the desired optimal solution in terms of performance indicators. Necessary interactive software packages for all the above subsystems have been developed.