Hybrid Electric Drive for DDG-51 Class Destroyers

The first of the Arleigh Burke class destroyers is nearing its mid-life. This class of ships was designed during the late 1970s through the 1980s to meet the threats that were prevalent at that time. Since entering service in 1991, these ships have shown themselves to be extremely versatile and the class now consists of nearly 60 ships in service. Their combat systems have been continually upgraded and adapted to meet the new threats the United States faces today. However, in order to keep these platforms viable throughout the first half of the 21st century, their operating costs must be reduced. Manpower, maintenance, and fuel are three of the top operating cost drivers. Most surface combatants spend very little of their underway time operating at full speed or even close to that. Over 1/3 of their underway time is spent at 12 knots and under. This is less than half of their maximum speed and only a fraction of the maximum power owing to the cubic speed–power relationship. Although the existing mechanical drive system is reasonably efficient, the main gas turbines are extremely inefficient at these very low power levels. A shaft-mounted auxiliary electric propulsion system (EPS) can take advantage of excess capacity in the ship service generators to reduce the main engine operating hours. Enabling bi-directional power flow from this auxiliary electric drive will provide additional generation capacity for ship service loads at a modest additional cost. It also provides a "cross-connect" capability from one shaft to the other. This paper will explore one prospect for reducing the operating cost of the DDG-51 class of ships by installing an auxiliary EPS that would powered by the ship service electrical plant. This additional system would serve to reduce both underway fuel usage as well as maintenance on the gas turbine main engines by reducing the number of operating hours on each engine. We will examine the technology trade-offs in this ongoing study.     

USS Boone (FFG 28) Emergent Underwater Rudder Replacement

On November 30, 2006, USS Boone (FFG 28) lost all steering control in the Mediterranean Sea due to a lost rudder. Within hours of the casualty, numerous US Navy and contractor activities sprung into action to coordinate and complete an emergent voyage repair to return USS Boone to service to support the Global War on Terrorism. The Navy faced a large hurdle to identify and transport a replacement rudder to Rota, Spain, and prepare and carry out an extremely complex repair procedure. Pearl Harbor Naval Shipyard personnel removed the replacement rudder from USS Crommelin (FFG 37) in Pearl Harbor Naval Shipyard and transported the rudder to Rota, Spain. The Navy's Supervisor of Salvage and Diving developed the repair procedure and coordinated the repair operation, which involved over 30 US Navy and contractor divers. The repair team completed the rudder replacement on December 28, 2006 and returned USS Boone to underway operations.     

1/32° real-time global ocean prediction and value-added over 1/16° resolution

A 1/32° global ocean nowcast/forecast system has been developed by the Naval Research Laboratory at the Stennis Space Center. It started running at the Naval Oceanographic Office in near real-time on 1 Nov. 2003 and has been running daily in real-time since 1 Mar. 2005. It became an operational system on 6 March 2006, replacing the existing 1/16° system which ceased operation on 12 March 2006. Both systems use the NRL Layered Ocean Model (NLOM) with assimilation of sea surface height from satellite altimeters and sea surface temperature from multi-channel satellite infrared radiometers. Real-time and archived results are available online at http://www.ocean.nrlssc.navy.mil/global_nlom. The 1/32° system has improvements over the earlier system that can be grouped into two categories: (1) better resolution and representation of dynamical processes and (2) design modifications. The design modifications are the result of accrued knowledge since the development of the earlier 1/16° system. The improved horizontal resolution of the 1/32° system has significant dynamical benefits which increase the ability of the model to accurately nowcast and skillfully forecast. At the finer resolution, current pathways and their transports become more accurate, the sea surface height (SSH) variability increases and becomes more realistic and even the global ocean circulation experiences some changes (including inter-basin exchange). These improvements make the 1/32° system a better dynamical interpolator of assimilated satellite altimeter track data, using a one-day model forecast as the first guess. The result is quantitatively more accurate nowcasts, as is illustrated by several model-data comparisons. Based on comparisons with ocean color imagery in the northwestern Arabian Sea and the Gulf of Oman, the 1/32° system has even demonstrated the ability to map small eddies, 25–75 km in diameter, with 70% reliability and a median eddy center location error of 22.5 km, a surprising and unanticipated result from assimilation of altimeter track data. For all of the eddies (50% small eddies), the reliability was 80% and the median eddy center location error was 29 km. The 1/32° system also exhibits improved forecast skill in relation to the 1/16° system. This is due to (a) a more accurate initial condition for the forecast and (b) better resolution and representation of critical dynamical processes (such as upper ocean – topographic coupling via mesoscale flow instabilities) which allow the model to more accurately evolve these features in time while running in forecast mode (forecast atmospheric forcing for the first 5 days, then gradually reverting toward climatology for the remainder of the 30-day forecast period). At 1/32° resolution, forecast SSH generally compares better with unassimilated observations and the anomaly correlation of the forecast SSH exceeds that from persistence by a larger amount than found in the 1/16° system.     

Maritime interests in the EU policy-making: Structures,practices, and governability of collective action

Throughout Europe, a number of maritime interests have re-targeted their lobbying structures and strategies aiming to influence the development of the maritime related European Union (EU) policies. The paper examines these maritime interests’ mobilisation in the making of the Common EU Maritime Transport Policy (CMTP). First, it provides a review of the role of these interest groups and the implications of the observed collective interests’ representation. Then, with the contribution a data-set of replies to a questionnaire distributed to all the interest groups that are involved in EU maritime affairs, the paper analyses the variety of interest groups representing the maritime sector in EU affairs. The focus is on the structures (i.e. membership numbers and types, location, internal structures, budget) and the lobbying practices of the 37 identified EU level maritime related organisations. The paper also presents an evaluation of the most positive and most negative parameters of the ‘EU environment’ and the ‘economic environment’ that assist, or undermine, the governability cohesiveness of this collective action. This study provides information on whether and under what conditions maritime interests are able to form comprehensive EU-level organisations capable of representing their members and their interests in the EU policy making process     

Longhaul feeder services in an era of changing technology: an Asia-Pacific perspective

Traditional liner carriers, operating in the highly competitive commercial environment of the last few years, have attempted to lower the marginal cost of each box carried. Technological improvements in both construction and propulsion systems have led to a steady growth in carrying capacity. Ships of 600+ TEUs are now in service and, as a result of this trend, have displaced 'smaller' ships from the major east-west trades. The more competitive environment of these trades has in turn led to a redeployment of ships in the 2500+ TEU range to the north-south trades. The result has been a rapid increase in north-south capacity, including feeder services and falling freight rates. Despite the current excess supply in shipping and historically low freight rates, significant developments in technology have created opportunities for new fast containerships. The paper analyses the key economic factors in the differentiation of the new fast ship technology from the traditionally designed containerships and demonstrates the potential financial viability to owners of these new 'greyhounds'.     

The Geometrical Contact between Track and Wheelset

In previous publications the author has described a so-called first-order theory for the motion of a railway vehicle wheelset on a tangent track. In the present report the geometrical aspect of this theory is further evaluated and a method for solving the constraint equations between the coordinates of the wheelset is indicated.     

Fatigue damage calculation for oil tanker and container ship structures

The fatigue behaviour of longitudinal stiffeners of oil tankers and container ships, subjected to dynamic loads, is analysed. The following dynamic load components are considered: hull girder vertical wave bending moment, alone and combined with the horizontal wave bending moment, hydrodynamic pressure and inertial forces caused by cargo acceleration.

The spectral method was selected to calculate the fatigue damage, based on S—N curves and Miner's rule. Following this approach, the fatigue damage may be calculated as a function of a stress parameter Ω_p, which represents the cumulative effect of wave induced loads in the unit of time and incorporates the combined effects of stress level and its occurring frequency.

Simple formulas for Ω_p of oil tankers and container ships are given, obtained from the results of hydrodynamic analyses performed on several ships, in different wave environments.

Several examples show the applicability of the methods to real ship structures. The method, however, still needs to be calibrated because of the simplifying hypotheses introduced in the loading conditions.     

Vehicle Energy Dissipation Due to Road Roughness

Road roughness and surface texture are known to affect tire rolling resistance; however, little emphasis has been placed on the consequent changes in total vehicle energy dissipation due to road roughness. Thus, tire rolling resistance, in isolation from vehicle contributed losses such as dissipation in the suspension, appears to be a weakness in present evaluation procedures as they relate to fuel economy and pollution level testing: Recent work by Funfsinn and Korst has shown that substantial and measurable increases in energy losses occur for vehicles traveling on rough roads. The present investigation uses vehicle axle accelerations as a means of examining various road surfaces. Correlation with computer simulations has allowed the development of a deterministic road roughness model which permits the prediction of energy dissipation in both the tire and suspension as functions of road roughness, tire pressure, and vehicle speed. Comparison to the experiments of Korst and Funfsinn results in good agreement and shows that total rolling loss increases of up to 20 percent compared to ideal smooth roads are possible. The aerodynamic drag coefficient is also found to increase while driving on rough roads.     

An application of variance reduction techniques in freeway simulation

Computer simulation models are used in a variety of applications in transportation engineering and have become a prime aid in decision making. The applications range from evaluating traffic control strategies for single intersections to such complex decision processes as evaluating the impact of removing toll facilities at the George Washington Bridge in New York City. While it is widely accepted that simulation offers an unmatchable capability of evaluating alternate control policies, the high variance of the output variable presents a critical problem in such comparative analyses. The simulation models with high output variance must be run longer or replicated many times to achieve a desired precision level, and that corresponds to increased cost of computer resources. This paper describes and illustrates the application of variance reduction concepts that can improve the reliability and efficiency of the simulation experimental process by taking advantage of the simulation model structure. The two variance reduction concepts (common random numbers and antithetic variates) reduce the variance of the output variable by replacing the original sampling procedure with a new procedure that yields the same expected value but with a smaller variance. The application of the variance reduction concept was illustrated using results from experiments with a freeway simulation model. The results indicate that both common random numbers and antithetic variates sampling procedures appreciably reduce the variance of the simulation output measure.