Training Needs of Coastal Resources Decision Makers in Ohio's Lake Erie Basin

This article describes results from a study focused on informational and knowledge needs of local coastal resources decision makers in the Ohio Lake Erie basin. New information was obtained through a series of focus groups of local decision makers and key training providers in the basin. The results suggest that training providers and local coastal resources decision makers have differing perceptions of knowledge and information needs and training venues. The results suggest a role for state and federal agency training providers as coordinators and facilitators of an enhanced learning network among decision makers, including support of an information clearinghouse, adoption of appropriate e-based learning modalities, and regionally based learning and practice networks to improve the function of the training market to meet local decision maker needs.     

Hysteresis in travel demand

This paper presents evidence that there is a hysteresis effect in the demand for transport usage with respect to price. Consequently the neoclassical concept of a smooth continuous demand curve is questioned. The author presents a hysteresis model whereby changes in demand and of demand are embraced in a single theory related to generalized cost.     

Application of a real-coded genetic algorithm for the fitting of a ship hull surface through a single non-uniform B-spline surface

In digital ship-design processes, surface modeling needs to be as accurate as possible for effectiveness in ship production as well as numerical analysis of the performance. Traditionally, the form of a ship hull is constructed from a set of cross-sectional data. This approach entails difficulties in the cross-sectional spacing and accuracy of the characteristic curves, such as the stern and bow profiles, deck side line, bottom tangential line, and unconnected curves. Genetic algorithms (GAs) have attracted increasing attention as a multimodal optimization solution for surface reconstruction that enable construction of a single non-uniform B-spline (NUB) surface at the initial stage of ship design with constraints such as knuckles, discontinuity conditions, and bulbous bows with high curvatures, . The first, simultaneous multi-fitting GA determines the boundary curves, such as the stem and stern profiles, and finds the common knot values for both curves. Similarly, the same GA technique is applied for other boundary curves at the bottom and the deck. The second GA is employed to fit the interior data points after the boundary curves are fitted. The encoded design variables for surface construction are the locations of the vertices and the knot values. Those variables are modified for improving the surface quality until a predefined degree of precision is attained. In four instances of application, the GA technique developed in this research has been shown to provide good, single, NUB surfaces with high efficiency. In the early design stage, a single NUB surface is more convenient for performance visualization and finite-element methods. It can be readily translated into many CAD/CAM packages, which facilitate the smooth transition of data across the different design stages.     

Some managerial and technical issues in transport sector development projects

In development projects there is only one problem, but it is huge: everything is connected to everything else. The authors separated from the whole the following important issues: (1) Project management and coordination: The Recipient Country’s Aid Coordination Unit (ACU) and Project Implementation Unit (PIU) staffed with competent local experts are necessary to hold the reform process memory. This issue is considered in the context of “Ownership” and “Government Leadership” as it is recognized in donor aid forums in the last decade. (2) Human resource development: Most technical assistance is oriented toward providing solutions, and the development of local capacities is ignored. The authors point out the importance of specially selected local experts—the “Technical Communication Officers”. (3) Institutional functioning: A ‘process consultation’ approach to institutional restructuring is promoted in which the Recipient has the key role. It is also recommended that the Recipient is the initiator of technical assistance in the projects. (4) Design standards are a recurrent and difficult problem. Recommendations are necessary how to transit to the new standards and how to mediate their approval process. (5) Procurement and management of consulting services: The authors argue that the recipient country qualified professionals have to be in the lead role. The vignettes in the paper are from the “real world” although they are modified slightly to protect privacy.     

Liner freight rates,discrimination and cross-subsidization

This paper reviews some of the current literature concerning liner freight rates. While upholding the traditional basis for the establishment of freight rate structures it disputes some of the arguments that discrimination or differential pricing policies lead to cross-subsidization of low rated by higher rated cargoes.     

Modeling and analysis of a fuel-injection pump used in diesel engines

The Fuel-Injection Pump (FIP) used in diesel engine has a higher-pair cam-mechanism to pressurize the fuel for injection. This paper proposes a methodology to model FIP from a multibody Dynamics (MBD) perspective. The results from the model include the temporal behavior of driving torque, contact Hertz stress and reaction forces at various joints. The model helps the designer to assess the effect of various cam profiles, link parameters and other design variables. It is necessary that these parameters be optimized for future high pressure applications. For this purpose, a cam-mechanism with offset follower axis is analysed. Decoupled Natural Orthogonal Complement (DeNOC) matrices based algorithm is used to model FIP without and with offset cam-mechanism. The study shows that, the offset cam-mechanism allows reduction in the side-thrust, reaction forces, and the contact Hertz stress acting on the cam-follower interface. As a typical case, for an FIP working around a pressure value of 600 bar, an optimum offset value is found to be 9.5 mm and it shows a reduction of about 45% in side thrust values. To validate the modeling approach, experimental studies are performed on pump without and with offset cam-mechanism. Experimental results are in qualitative agreement with the theoretical model results.     

Model Predictive Coordinated Control for Dual-Mode Power-Split Hybrid Electric Vehicle

Power-split hybrid electric vehicles (HEVs) have great potential fuel efficiency and have attracted extensive research attention with regard to their control system. The coordinated controller in HEV plays an important role in tracking the optimal state reference generated by the energy management strategy (EMS), so as to reach the desired fuel efficiency. Meanwhile, the coordinated controller also has a significant impact on driving performance. To improve its performance, the design of a model predictive control (MPC) based coordinated controller in power-split HEV is presented. First, a non-linear, time-varying constrained control oriented transmission model of a dual-mode power-split HEV is formulated to describe this control problem. Then, to solve this problem, the non-linear part in the transmission model is linearised, and a linear MPC is used to obtain the control signals for the motors and engine at each time step. To meet the requirements of real-time computation, a fast MPC method is also applied to reduce the online computation effort. Simulations and experiments demonstrate the effectiveness of the proposed MPC-based coordinated controller.     

Optimal Design for the Rear-Glass Joint of an Automobile for Squeak and Rattle Noise Reduction

Ever since vehicle noise, vibration, and harshness (NVH) reduction technology made dramatic improvements, vehicle interior noises represented by Squeak and Rattle (S/R) becomes an ever more important factor to improve the emotional quality of vehicles. Generally, people detect S/R noises on automotive interior parts, brake system, suspension, Body in White (BIW), etc. Among them, the rear-glass joint is a major source for vehicle interior noise, and can cause S/R noises under a variety of environmental and driving conditions. This study uses, two approaches, experimental and numerical approaches, to define the cause of S/R noise at the rear-glass section. Based on these two approaches, this study confirms that S/R noises generate through the contact between bottom side of molding and BIW. The sealant penetration length, panelmolding distance, and sealant width are the parameters affecting noise generation. In addition, this study created an optimal design with Design of Experiments (DOE) of the rear-glass joint. The design maximized the sealant penetration length, which is a parameter that majorly affects noise. The optimal design comprises of two steps: sealant injections shape optimization and rear-glass joint parameter optimization. Each step is carried out with FEA and validated by sealant penetration experiments. Through these optimizations, this study obtained an optimum combination of design parameters and fignificantly reduced the noise generated by rear-glass section.     

The authors in this issue

This paper analyses the impacts on a particular region of a recent policy change regarding public transit subsidy in New Zealand, under which the contributions of local authorities are increased from 0 to 50% of net direct expenditures. The options open to the community are examined and their effects on regional income, future development and social equitability are analysed. It also illustrates the cost effectiveness of a natural monopoly under increased accountability.     

Sociocultural Effects of a Market-Based Fishery Management Program in the Florida Keys

Spiny lobster (Panulirus argus) represents one of the most lucrative fisheries in the State of Florida, and a majority of the catch is landed in the Florida Keys. Over the past three decades, the industry grew significantly, and by the end of the 1980s, state fishery managers agreed that the fishery was overextended. In 1991, the Florida Legislature passed the Spiny Lobster Trap Certificate Program (LTC), created to stabilize the industry by reducing the total number of traps while allowing fishers to transfer trap certificates in a market-based system akin to individual transferable quotas. Data from a survey study suggest that a majority of the respondents are dissatisfied with the LTC, which they view as transitory and unsustainable. The fishers' negative views are motivated by sociocultural changes in the fishing community. Managers need to consider modifications to the LTC and other such marketbased programs to minimize sociocultural impacts and retain small-scale fisher participation in such fisheries.