Information Required for Integrated Coastal Zone Management: Conclusions from the European Demonstration Programme

This article presents the results of the Thematic Study on "the role of information in delivering Integrated Coastal Zone Management (ICZM) in Europe." It provides a definition of information and discusses the need for, and nature of, information as it influences and supports ICZM. The conclusions from the study are summarized, highlighting the importance of viewing information provision as part of the process of developing effective ICZM. The results of InfoCoast '99, a symposium held in February 1999 on knowledge and information for coastal management, are discussed and some of the practical steps that have and can be taken to meet the information need for ICZM in Europe are considered.     

Advanced Driver Assistance Systems from Autonomous to Cooperative Approach

Abstract

Advanced Driver Assistance Systems (ADAS) have been one of the most active areas of ITS studies in the last two decades. ADAS aim to support drivers by either providing warning to reduce risk exposures, or automating some of the control tasks to relieve a driver from manual control of a vehicle. ADAS functions can be achieved through an autonomous approach with all instrumentation and intelligence on board the vehicle, or through a cooperative approach, where assistance is provided from roadways and/or from other vehicles. In this article, recent research and developments of longitudinal control assistance systems are reviewed including adaptive cruise control, forward collision warning and avoidance, and platooning assistants. The review focuses on comparing between autonomous systems and cooperative systems in terms of technologies used, system impacts and implementation. The main objective is to achieve common understanding on ADAS functional potentials and limitations and to identify research needs for further studies.     

Determining strategies to increase response rates in transport surveys of small shop-based businesses

Increasing representation of small business perspectives in policy research would benefit from identifying strategies to increase response rates. Despite the significance of the issue, there is inconsistent reporting amongst small business research about issues such as sampling, recruitment and survey design. Reporting on such issues may help address the under-representation of small business respondents and help reduce wasting research resources on less effective strategies. For policy matters that have the potential to disrupt how small business owners run their business, this is of particular importance. This paper reports on a survey of small businesses about changes to the transport accessibility features of a town centre that have the potential to affect the supply of car parking. Based on a review of the available literature, strategies were adopted to reduce respondent burden and maximise engagement. The paper presents an analysis of recruitment approaches in the first wave of the survey and demonstrates how the refinements to the recruitment approach were successful in achieving an increase in response rate from 40% to 47%.     

Node-based scheduling method for easy migration from CAN to FlexRay in in-vehicle networking systems

As vehicles become more intelligent, in-vehicle networking (IVN) systems such as controller area network (CAN) are essential for the convenience and safety of drivers. To expand the applicability of IVN systems, attention is currently being focused on chassis networking systems that require increased network capacity and real-time capabilities. FlexRay was developed to replace CAN protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. However, FlexRay network systems require a complex scheduling method, which is a barrier to their implementation as chassis networking systems. In particular, if we want to migrate from a CAN network to a FlexRay network using the well-defined CAN message database, which has been specifically constructed for chassis networking systems by automotive vendors, a new type of scheduling method is necessary to reduce scheduling efforts during the software development process. This paper presents a node-based scheduling method for easy migration from a CAN network to a FlexRay network system. To demonstrate the feasibility of the technique, its performance is evaluated in terms of various software complexity indices.     

Simulation of flow in diesel particulate filter system using metal fiber filter media

Metal fiber is introduced as a new filter media in wall-flow Diesel Particulate Filter (DPF) system. This technology has high temperature durability which is required for filter regeneration, and can maintain the mechanical strength even in the extreme exhaust-related vibrations of vehicles. However, the regeneration near the wall (outer layer) is more difficult because of the heat loss and reduced gas flow near the wall. In this study, a flow is simulated to determine the flow control method for the more uniform flow in all filter layer. By using Star CCM+ commercial software, we obtain local velocity, streamline, and pressure distributions in the filter, which are typically difficult to obtain from measurements. The major control factors are the filter porosity, size and location of the distribution plate, and the number of blades of the swirler. By placing the distribution plate in front of the filter, the flow velocity near the wall was increased. The optimum location and size of the flat plate were chosen. By attaching the blade on the plate the flow velocity near the wall was increased more. Therefore, the regeneration efficiency is increased by using the swirler-type metal fiber DPF system.     

Road boundary detection and tracking for structured and unstructured roads using a 2D lidar sensor

Road boundaries can give useful information for evaluating safe vehicle paths in intelligent vehicles. Much previous research has studied road boundary detection, using different types of sensors such as vision, radar, and lidar. Lidar sensors, in particular, show advantages for road boundary extraction including high resolution and wide field of view. However, none of the previous studies examined the problem of detecting road boundaries when roads could be either structured or unstructured. In this study, we developed a road boundary detection and tracking algorithm using lidar sensing for both structured and unstructured roads. The algorithm extracts road features as line segments in polar coordinates relative to the lidar sensor. The extracted road features are then tracked with respect to a vehicle’s local coordinates using a nearest neighbor filter. The proposed algorithm accurately detected the road boundaries regardless of the road type.