Regional impacts of new transport infrastructure: a multisectoral potentials approach

This is the second of two background papers sponsored for the Symposium by the Administrative Commission for the north of the Netherlands. Its purpose is to provide an indication of the effects of the proposed high speed rail line between Amsterdam, Groningen and Hamburg on employment in the corridor. The authors first review the techniques of forecasting these effects discussed in the literature. The potentials approach is adopted for their analysis, the mathematics and underlying assumptions of which are presented. Finally, this model is run to provide an estimate of the impact on regional employment of three variants of the proposed rail line.     

高速磁浮列车绝对定位传感器的工程化设计与实现

本文对电磁悬浮型常导高速磁浮列车绝对定位传感器进行工程化设计研究。建立传感器的解析电磁学模型,并采用有限元仿真分析标志板的屏蔽特性,从而为线圈设计及传感器工作频率的选择提供依据。在此基础上,针对传感器的读码准确率、实时性和鲁棒性问题,对信号调理电路的动态特性及参数选择进行分析与设计,并基于有限状态机设计传感器的读码算法。试验表明本文所设计的传感器稳定可靠,可保证样车试验的长期顺利进行。该传感器同样适用于中低速磁浮列车,对于轮轨列车定位也有一定的参考价值。     

岩溶地区深水大直径桩基施工技术

结合溆浦至怀化高速公路沅水大桥深水大直径钻孔灌注桩的施工实践,介绍了岩溶地区深水环境下钻孔灌注桩的成桩工艺要点、关键施工技术及事故预防处理措施,可供类似地质条件的岩溶桩基施工借鉴。     

FZy-CTC列车占用丢失报警功能的开发

根据铁道部要求FZy-CTC系统增加了列车占用丢失报警功能,对运输指挥起到了较好的指导作用。描述FZy-CTC系统如何抽象该需求,对列车运行轨迹进行逻辑检查,并最终实现列车占用丢失报警功能。     

长春轻轨3号线东延线过渡段信号改造方案分析

轨道交通延伸线工程的接合处车站改造方案是影响整个工程实施的关键因素。针对长春轻轨3号线东延线过渡段2个车站信号系统的改造,详细探讨和分析信号设备变动和施工量,提出整体改造可行性方案,从工程实施难度和风险、节省投资等多个角度进行了比选。     

深圳地铁3号线列乍牵引系统通信故障分析及改进

通过对深圳地铁3号线牵引系统通信故障发生的时间以及故障发生当日的气温等信息的统计,初步确定故障源,采用现场与实验室试验相结合的方法,确定故障发生的具体原因,进而提出改进措施,收到良好效果。     

基于PLC控制的船用蓄电池充电装置设计

为减轻船用蓄电池充电时的劳动强度,降低充电操控复杂程度,提高对蓄电池充电的自动化和智能化水平,本文设计了PLC控制的船用大电流蓄电池充电装置,介绍了该装置的系统结构及其软硬件设计.整个充电过程,基本实现了自动控制,并能有效实现充电过程中过压、过流等报警提示、故障跳闸保护等.充电过程监测界面简洁直观,操作灵活方便.     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

电加热道岔融雪系统

RD1型电加热道岔融雪系统由远程控制中心、车站控制终端、融雪控制柜和加热装置4部分组成。该系统具有远程监视、远程控制、故障报警、数据管理等主要功能,通过对人身和轨道电路的安全保障设计与节能设计,提高系统的优越性。