The UNCTAD and WORKPORT models of port development: evolution or revolution?

Around ten years have elapsed since the UNCTAD model on port development was put forward as an explanation of how ports have adapted to incorporate technological, political and operational changes. The UNCTAD Three Generation Port Model is critically examined in the light of research carried out under the WORKPORT project funded by the European Commission, 1998-1999. Evidence from the WORKPORT study shows that, rather than developing in discrete steps, ports evolve continuously, adapting to new technologies, fresh legislation, revised working practices and other influences on an as-required basis. Further, it is demonstrated that several streams of evolution can be observed simultaneously; the pace of change within each stream can vary substantially. One of the prominent features of ports is that they often have several terminals, some operating along traditional lines while others may be leading edge in terms of technology, working practices or other aspects; all of them may be equally effective. The UNCTAD model, implying ports develop in discrete steps, or generations, is therefore shown to be fundamentally flawed.     

Mariner anticipation and performance

Collisions and groundings continue to take their toll on seafarers and the environment. Much has been said about the associated role of human factors. STCW95 endeavored to create a closer relationship between what is taught and what is needed to handle the demands of the operational environment. Technological developments such as ARPA, and in the future AIS, imply access to more data. With a view to determining how data should be presented and used, this study examines the capabilities of mariners to identify and initiate an appropriate course of action in an encounter where the need for two targets to maneuver to avoid collision with each other changes our own vessel’s passing distance from a safe to an unsafe state. Such a capability can generally add to the probability of a successful encounter through anticipating the resulting conflict with our own vessel and through taking appropriate early action. The outcome of this study, reported in this paper, was that very few senior officers and masters displayed the advanced level of anticipation skills that would provide the situation awareness needed for the encounter presented. Such outcomes may point to the need for inclusion of specific training in anticipation skills within the maritime educational system and/or for the provision of decision support systems which assist the development of situation awareness and identification of an appropriate course of action.     

A Versatile Flat Track Tire Testing Machine

Summary A flat track tire testing machine developed by the IMMa group is described. It permits the simulation and study of the dynamic behavior of a great variety of tires under controllable and repetitive highly dynamic realistic working conditions in the laboratory for a diversity of vehicles, from motorcycles to light trucks. The machine incorporates: - a hydraulically operated tire support and loading system with wide operating ranges; - a computer controlled brake system to simulate braking maneuvers with ABS systems; - a complete sensorial system; - a data acquisition and control system continually monitoring and acting on the experimental variables, i.e., tire and belt speed, longitudinal slip, slip and camber angles, tire pressure, tire normal force, etc. As an application example, results are presented that adjust the parameter of the magic formula for a standard 175/70 R14 passenger vehicle tire. Accurate mathematical tire models are recognized as essential for the prediction of vehicle dynamic performances using simulation tools.     

The PROFILE project: an overview

The EC MAST project PROFILE (Processes in Regions of Freshwater Influence, ROFIs) aims to develop process understanding and tested numerical models for ROFIs. This includes the role of physical processes controlling water-property distributions, suspended sediments controlling the availability of light, nutrients and phytoplankton growth. The project comprises: (1) construction of a 3D nearshore model, with high resolution (1 h and one km approx.) and a framework coupling modules for hydrodynamics (tides, effects of winds and waves, currents, temperature, salinity, turbulence and diffusivity), sediments, plankton, nutrients and oxygen, (2) investigation of methods to include ROFI model detail in coarser shelf-wide models, (3) specific tests of model components against measurements, (4) tests of model calculations against measurements in contrasted ROFIs, (5) systematic observations suitable for these model tests (time-series over a seasonal cycle for dynamics and intermittency, good vertical resolution and spatial surveys) of the contrasted Rhine, Clyde and Thermaikos Bay ROFIs, complementing earlier measurements in the ROFI areas of the Rhine, German Bight and Po, (6) interpretation and comparison of the contrasted ROFIs' behaviour, (7) a defined set of observations, model code and output suitable for subsequent integration and promulgation as test data and a nearshore model for wider use.     

Autonomous Lateral Control of Vehicles in an Automated Highway System

Lateral control of vehicles in IVHS requires the installation of on-board sensors as well as the installation of roadway hardware such as cables, magnets, etc. Existing control approaches in PATH require road curvature and vehicle lateral position (with respect to the center of the lane) information. Hence these approaches rely on roadway sensors to obtain relative lateral position. These methods will necessitate infrastructural changes to the highway.

This paper introduces the concept of autonomous lateral control or auto-tracking. The method allows us to use only line-of-sight sensor information to effect vehicle control. We present a detailed vehicle model. Controllers have been proposed to demonstrate the effectiveness of the proposed auto-tracking scheme. We also examine the possibilities of using this method for lane change purposes in an automated highway system.     

Baroclinic eddy formation in a Rhine plume model

A three-dimensional finite difference tidal model, including advective and diffusive transport of salinity, is used in the two-layer model for simulation of Rhine water outflow. Layer depths are adjusted in a way that no advective transports between upper and lower layer take place in case of sufficiently stable stratification.Model results show frontal eddy development related to (limited) growing internal waves in case of weak northeasterly to southeasterly winds. It is shown that baroclinically unstable conditions occur, related to vertical velocity shear, resulting in frontal meanders with wave lengths between 18 and 30 km. Satellite images of sea surface temperature show a comparable behaviour of the temperature front, which is strongly correlated with the salinity front of the Rhine plume.     

海洋浮体非线性水弹性力学分析--结构非线性的初步考虑

前文^[1-3]分别介绍了二阶非线性水弹性分析中流体非线性的理论与部分典型算例结果。本文则在流体线性假定的前提下，介绍结构非线性的考虑方法。以大变形浮动平板在多向规则波中的运动与变形响应为例，介绍了板垂向位移与流体相互耦合的频域分析方法。讨论了板内薄膜力对结构变形与受力的影响。数值算例表明，薄膜力对变形、弯矩和应力都有一定程度的非线性贡献，在某些情况下是不可忽略的。     

High speed driving stability of passenger car under crosswind effects

The driving stability of a passenger car at high-speed and under crosswind conditions is affected by aerodynamic characteristics as well as their dynamic characteristics, suspension, and weight distribution. In this study, the total measuring system was thought up to understand the transient vehicle dynamics and aerodynamics with driver’s control inputs all together. The test results were taken from a full-scale wind tunnel test, a crosswind generator test and an on-road test. We investigated major aerodynamic parameters that affect the driving stability of passenger cars under crosswind effects such as overtaking, passing each other, natural crosswind, etc. The reaction rate of high-speed stability will be improved when we minimize the total lift, side force and especially the yawing moment.     

Parallel model based fault detection algorithm for electronic parking brake system

This paper describes a parallel model-based fault detection algorithm for an electronic parking brake (EPB) system, which consists of an electronic control unit with built-in current sensor and braking force sensor. For the EPB system to supply sufficient parking force to a vehicle, the parking force sensor is of utmost importance. If a fault occurs in this sensor, sufficient parking force may not be supplied, thereby seriously threatening the safety of the vehicle. Thus, a fault detection method is required for the parking force sensor of the EPB system to improve the safety of vehicles. For this purpose, a highly reliable fault detection method is needed to detect abnormal fault signals, which cannot be detected by the existing on-line sensor monitoring fault detection methods. This paper proposes a novel parallel model-based fault detection algorithm for the EPB system, which compares the physical sensor data with the mathematical model, the fuzzy model, and the neural network model at the same time. In order to reduce false alarms, the magnitude of thresholds and the operation counts are changed adaptively. When the proposed parallel model-based fault detection algorithm detects severe failures of the force sensor, it warns the driver in advance to prevent accidents due to the failures. The proposed algorithm is verified by hardware-in-theloop simulations in various situations.     

Generalized magnetorheological (MR) damper model and its application in semi-active control of vehicle suspension system

In this paper, analytical characterization of the magneto-rheological (MR) damper is done using a new modified algebraic model. Algebraic model is also more preferable because of its low computational expenses compared to differential Bouc-Wen’s model which is highly computationally demanding. This model along with the obtained model parameters is used as a semi-active suspension device in a quarter car model and the stationary response of the vehicle traversing on a rough road is obtained. The control part consists of two nested controllers. One of them is the system controller which generates the desired damping force and the other is the damper controller which adjusts the voltage level to MR damper so as to track the desired damping force. For the system controller a model reference skyhook Sliding Mode Controller (SMC) is used and for the damper controller a continuous state algorithm is built to determine the input voltage so as to gain the desired damping force. The analytical model is subsequently used in the quarter car vehicle model and the vehicular responses are studied. A simulation study is performed to prove the effectiveness and robustness of the semi-active control approach. Results show that the semi-active controller can achieve compatible performance as that of active suspension controller except for a little deterioration.