基于神经网络的半主动悬架自适应模糊控制

提出了基于神经网络的自适应模糊控制策略。模糊控制主要用来对付系统的非线性；神经网络根据振动响应的方差递推结果来辨识车体的振动情况实时调节模糊控制器的量化因子，使模糊控制器对路面的变化具有自适应的能力。在半主动悬挂1／4车非线性模型的基础上进行了仿真研究。     

车辆动力传动系固有特性灵敏度分析及动力学修改

分析了车辆动力传动系无阻尼自由振动固有特性的灵敏度，特别给出了固有频率和振型对轴系刚度及惯量等物理参数的灵敏度。基于固有特性灵敏度分析，给出了动力学修改的计算方法。并以某重型车辆动力传动系为实例计算并分析了其固有频率和振型的灵敏度问题，在此基础上进行了动力学修改。     

汽车急加速噪声信号分析

汽车急加速噪声信号属于短时非平稳信号，在探讨各种时频分析方法的基础上，找到了一种适合于急加速噪声信号的处理方法——短时最大熵谱方法，这将有利于急加速噪声问题的进一步深入研究。     

汽车精密成型技术现状与发展趋势刍议

简述了汽车精密成型技术的内涵、特点及其在汽车制造中的地位，较深入地分析了目前国内外精密冲压、精密铸造、精密锻造和精密焊接技术等汽车精密成型技术的发展现状，并指出汽车精密成型未来发展的主要趋势。     

微型电动轿车车身骨架结构分析

利用ANSYS软件对某进口微型电动轿车车身骨架进行了强度、刚度和模态计算：分析了电动轿车车身骨架的结构特点和电瓶盒等钣金件的影响，提出了独立悬架边界条件的模拟方法。     

Neighborhood services,trip purpose,and tour-based travel

Communities are increasingly looking to land use planning strategies to reduce drive-alone travel. Many planning efforts aim to develop neighborhoods with higher levels of accessibility that will allow residents to shop closer to home and drive fewer miles. To better understand how accessible land use patterns relate to household travel behavior, this paper is divided into three sections. The first section describes the typical range of services available in areas with high neighborhood accessibility. It explains how trip-based travel analysis is limited because it does not consider the linked (chained) nature of most travel. The second section describes a framework that provides a more behavioral understanding of household travel. This framework highlights travel tours, the sequence of trips that begin and end at home, as the basic unit of analysis. The paper offers a typology of travel tours to account for different travel purposes; by doing so, this typology helps understand tours relative to the range of services typically offered in accessible neighborhoods. The final section empirically analyzes relationships between tour type and neighborhood access using detailed travel data from the Central Puget Sound region (Seattle, Washington). Households living in areas with higher levels of neighborhood access are found to complete more tours and make fewer stops per tour. They make more simple tours (out and back) for work and maintenance (personal, appointment, and shopping) trip purposes but there is no difference in the frequency of other types of tours. While they travel shorter distances for maintenance-type errands, a large portion of their maintenance travel is still pursued outside the neighborhood. These findings suggest that while higher levels of neighborhood access influences travel tours, it does not spur households to complete the bulk of their errands close to home.     

Storage space allocation in container terminals

Container terminals are essential intermodal interfaces in the global transportation network. Efficient container handling at terminals is important in reducing transportation costs and keeping shipping schedules. In this paper, we study the storage space allocation problem in the storage yards of terminals. This problem is related to all the resources in terminal operations, including quay cranes, yard cranes, storage space, and internal trucks. We solve the problem using a rolling-horizon approach. For each planning horizon, the problem is decomposed into two levels and each level is formulated as a mathematical programming model. At the first level, the total number of containers to be placed in each storage block in each time period of the planning horizon is set to balance two types of workloads among blocks. The second level determines the number of containers associated with each vessel that constitutes the total number of containers in each block in each period, in order to minimize the total distance to transport the containers between their storage blocks and the vessel berthing locations. Numerical runs show that with short computation time the method significantly reduces the workload imbalance in the yard, avoiding possible bottlenecks in terminal operations.     

Active Roll Control of Single Unit Heavy Road Vehicles

Summary Strategies are investigated for controlling active anti-roll systems in single unit heavy road vehicles, so as to maximise roll stability. The achievable roll stability improvements that can be obtained by applying active anti-roll torques to truck suspensions are discussed. Active roll control strategies are developed, based on linear quadratic controllers. It is shown that an effective controller can be designed using the LQG approach, combined with the loop transfer recovery method to ensure adequate stability margins. A roll controller is designed for a torsionally flexible single unit vehicle, and the vehicle response to steady-state and transient cornering manoeuvres is simulated. It is concluded that roll stability can be improved by between 26% and 46% depending on the manoeuvre. Handling stability is also improved significantly.     

Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.