剧烈动态轮轨相互作用的自动检测

轨道几何形状检查记录车是检测轨道表面问题的主要方法。在重载运输中 ,重复运输可能产生一系列特殊轮轨不平顺 ,当车辆以临界速度运行时 ,即使这些不平顺是均匀分布的 ,它们仍然能激起剧烈的轮轨相互作用。本文阐述了一种安装在正常运营中的运煤车上的轮轨相互作用的监控和记录系统     

Dynamic Properties of Motorcycle and Scooter Tires: Measurement and Comparison

Summary Results of an experimental research program dealing with motorcycle and scooter tires are presented. Experimental tests were carried out by means of a rotating disk test machine, which is particularly suited to test tires in the presence of large camber angles. First, the capabilities of the rotating disk machine are discussed and results are compared with the ones obtained by means of other test machines. Then the properties of several motorcycle and scooter tires are presented and compared. The advantage of presenting results in terms of camber and sideslip stiffness is highlighted. The effect of tire working conditions (inflation pressure, load and temperature) is analyzed. Finally the measurement of tire torques is discussed and some results dealing with self-aligning, twisting and rolling resistance torques are presented.     

Atmospheric CO2 measurements and error analysis on seasonal air–sea CO2 fluxes in the Bay of Biscay

Atmospheric molar fraction of CO₂ (xCO₂^atm) measurements obtained on board of ships of opportunity are used to parameterize the seasonal cycle of atmospheric xCO₂ (xCO₂^atm) in three regions of the eastern North Atlantic (Galician and French offshore and Bay of Biscay). Three selection criteria are established to eliminate spurious values and identify xCO₂^atm data representative of atmospheric background values. The filtered data set is fitted to seasonal curve, consisting of an annual trend plus a seasonal cycle. Although the fitted curves are consistent with the seasonal evolution of xCO₂^atm data series from land meteorological stations, only ship-board measurements can report the presence of winter xCO₂^atm minimum on Bay of Biscay. Weekly air–sea CO₂ flux differences (mmol C·m^− 2 day^− 1) produced by the several options of xCO₂^atm usually used (ship-board measurements, data from land meteorological stations and annually averaged values) were calculated in Bay of Biscay throughout 2003. Flux error using fitted seasonal curve relative to on board measurements was minimal, whereas land stations and annual means yielded random (− 0.2 ± 0.3 mmol C·m^− 2·day^− 1) and systematic (− 0.1 ± 0.4 mmol C·m^− 2 day^− 1), respectively. The effect of different available sources of sea level pressure, wind speed and transfer velocity were also evaluated. Wind speed and transfer velocity parameters are found as the most critical choice in the estimate of CO₂ fluxes reaching a flux uncertainty of 7 mmol C·m^− 2·day^− 1 during springtime. The atmospheric pressure shows a notable relative effect during summertime although its influence is quantitatively slight on annual scale (0.3 ± 0.2 mmol C·m^− 2·day^− 1). All results confirms the role of the Bay of Biscay as CO₂ sink for the 2003 with an annual mean CO₂ flux around − 5 ± 5 mmol C m^− 2 day^− 1.     

Improvement of Propeller Hydrodynamic Drag and Efficiency on USCG Cutters Operating in Trailshaft Mode

Large US Coast Guard cutters spend much of their underway time with only one of two propellers operating. The offline propeller is "trailed," often creating a significant amount of hydrodynamic drag. Operators from the fleet do not appear to have any specific guidance on how best to reduce this drag. Using the propeller analysis tools PSF-3 and PSF-10, propeller thrust coefficient values versus advance coefficient values were created for the propellers of the USCG 270' cutters. These values—and the associated drag—vary significantly in magnitude based on the trailed propeller pitch. Based upon sea trial measurements, expected magnitudes of this drag versus pitch setting were predicted. Minimum drag pitch settings were identified for an operational 270' cutter at 8 knots. RPM and pitch settings for maximum hydrodynamic efficiency for the online shaft are sometimes developed during ship acquisition. In the current work, a methodology for conducting such a study is discussed to demonstrate to ship operators the relative ease with which they could perform this analysis on board, if effective power and propeller thrust coefficient values are available. Consideration of prime mover specific fuel consumption rates together with propeller hydrodynamic efficiencies is discussed.     

OPA 90

The Donaldson Report has been published and we are entitled to ask 'where do we go from here?' The majority of the shipping world, recognizing the international nature of the business moves by consensus such that rules applicable in Europe are also applicable in, say, Asia or South America. By its very nature this method takes time to bring rules into effect. By contrast the United Stated of America takes the unilateral approach to transport regulations and because it is such an important trading nation, particularly with regard to shipping, those wishing to participate in the trade must comply with the U.S. rules. One such example is the Oil Pollution Act of 1990 (OPA 90) passed just four year ago. The shipping industry in general and the tanker industry in particular has had to adapt if it wishes to trade within the United States' navigable waters, adjoining shorelines, or the exclusive economic zone (200 miles). This paper looks at those sections of the Act that, from the standpoint of the tanker industry, have had the biggest impact when trading to the United States. We therefore look at how OPA 90 addresses the issues of prevention, clean up and who will pay?     

What determines transit energy use?

A comparison of the energy use per passenger-mile of eight modes of urban transportation is made in terms of eleven variables, resulting in conclusions about the direction transit system design should take to provide adequate transportation with minimum energy use. The method can easily be programmed on a personal computer to be used to study the effects of parameter variations on energy use.     

基于全矢量显式算法的双相流填充数值模拟

基于模拟填充过程显式算法,提出用于模拟双相流的全矢量化运算显式算法。在双相流混合理论的基础上,对各类双相流填充及组份分离现象进行模拟。为高效求解耦合的Navier Stokes方程,新算法中的矩阵操作仅在单元一级进行,避免全局求解,使全局操作完全矢量化。新算法的另一显著优势,是采用等阶插值的普通单元,使不可压缩条件通过反馈修正的方法得到满足,通过系统化的光顺处理来避免由于应用等阶插值而导致的自锁。由于全局操作完全矢量化,计算代价与节点的自由度近似成正比,可实现高效的双相流填充及组份分离现象的模拟,满足工业应用中模拟复杂实际问题的需要。     

Assimilation of buoy and satellite data in wave forecasts with integral control variables

The quality of numerical wave forecasts can be improved significantly by assimilating wave observations prior to the forecast. In the present study a technique for such assimilation is developed that exploits (a) the efficiency of a limited number of integral control variables, and (b) the effectiveness of variational (model-consistent) assimilation. The formal procedure is independent of the type of control variables and of the wave model (moreover, no adjoint wave model is required). In the present study, integral control variables are chosen to represent large-scale errors in the driving wind fields and uncertainties in the wave model. The assimilation technique is validated with observations of the ERS-1 satellite altimeter and two waverider buoys in two consecutive storms in the Norwegian Sea. The assimilation of the observations reduced the errors in the forecasted significant wave height at the buoy locations typically from 25% to 12%. For low-frequency waves the effect of the assimilation is similarly significant at one buoy location but marginal at the other buoy location.