An analysis of bicycle route choice preferences in Texas,US

In the US, the rise in motorized vehicle travel has contributed to serious societal, environmental, economic, and public health problems. These problems have increased the interest in encouraging non-motorized modes of travel (walking and bicycling). The current study contributes toward this objective by identifying and evaluating the importance of attributes influencing bicyclists’ route choice preferences. Specifically, the paper examines a comprehensive set of attributes that influence bicycle route choice, including: (1) bicyclists’ characteristics, (2) on-street parking, (3) bicycle facility type and amenities, (4) roadway physical characteristics, (5) roadway functional characteristics, and (6) roadway operational characteristics. The data used in the analysis is drawn from a web-based stated preference survey of Texas bicyclists. The results of the study emphasize the importance of a comprehensive evaluation of both route-related attributes and bicyclists’ demographics in bicycle route choice decisions. The empirical results indicate that travel time (for commuters) and motorized traffic volume are the most important attributes in bicycle route choice. Other route attributes with a high impact include number of stop signs, red light, and cross-streets, speed limits, on-street parking characteristics, and whether there exists a continuous bicycle facility on the route.

Roadmap for free-floating bikeshare research and practice in North America

ABSTRACT

The deployment of smartphone-operated, non-station-based bicycle fleets (“dockless” or “free-floating” bikeshare) represents a new generation of bikesharing. Users locate bikes in these free-floating systems using Global Positioning Systems (GPS) and lock bikes in place at their destinations. In this paper, we review current free-floating bikesharing systems in North America and discuss priorities for future research and practice. Since launching in 2017, free-floating bikeshare has expanded rapidly to encompass 200+ systems operating 40,000+ bikes within 150+ cities. In contrast with previous systems, free-floating systems operate almost exclusively using commercial “for-profit” models, amidst concerns of financial sustainability. Governance for these systems is in early stages and can include operating fees, fleet size caps, safety requirements, parking restrictions, data sharing, and equity obligations. We identify research and practice gaps within the themes of usage, equity, sharing resources, business model, and context. While some existing bikesharing literature translates to free-floating systems, novel topics arise due to the ubiquity, fluidity, and business models of these new systems. Systems have numerous obstacles to overcome for long-term sustainability, including barriers common to station-based systems: limited supportive infrastructure, equity, theft or vandalism, and funding. Other unique obstacles arise in free-floating bikeshare around parking, sidewalk right of ways, varied bicycle types, and data sharing. This review offers background in and critical reflection on the rapidly evolving free-floating bikeshare landscape, including priorities for future research and practice. If concerns can be overcome, free-floating bikeshare may provide unprecedented opportunities to bypass congested streets, encourage physical activity, and support urban sustainability.     

Integrating GIS concepts into transportation network data structures

Transportation network data structures must be designed to meet the requirements of the analyses being conducted and must be compatible with the selected graphical user interface. Increasing interest in geographic information systems (GIS) and intelligent transportation systems (ITS) have further burdened the network data structure. It is possible to implement object oriented programming (OOP) technology to satisfy these needs, without making the data structure excessively complicated.

This paper shows how a well‐developed network data structure can incorporate major capabilities normally associated with stand‐alone GIS's. The design of a network data structure derives from both theoretical and practical considerations. A design of a network data structure, composed entirely of objects, is presented. Examples of its implementation, limitations, advantages, and possible extensions are drawn from experience with the General Network Editor (GNE).     

Integrating congestion pricing,transit subsidies and mode choice

We model and analyze optimal (welfare maximizing) prices and design of transport services in a bimodal context. Car congestion and transit design are simultaneously introduced and consumers choose based on the full price they perceive. The optimization variables are the congestion toll, the transit fare (and hence the level of subsidies) and transit frequency. We obtain six main results: (i) the optimal car-transit split is generally different from the total cost minimizing one; (ii) optimal congestion and transit price are interdependent and have an optimal frequency attached; (iii) the optimal money price difference together with the optimal frequency yield the optimal modal split; (iv) if this modal split is used in traditional stand-alone formulations – where each mode is priced independently–resulting congestion tolls and transit subsidies and fares are consistent with the optimal money price difference; (v) self-financing of the transport sector is feasible; and (vi) investment in car infrastructure induces an increase in generalized cost for all public transport users.     

Simultaneous optimization of transit line configuration and passenger line assignment

Passenger transportation in most large cities relies on an efficient mass transit system, whose line configuration has direct impacts on the system operating cost, passenger travel time and line transfers. Unfortunately, the interplay between transit line configuration and passenger line assignment has been largely ignored in the literature. This paper presents a model for simultaneous optimization of transit line configuration and passenger line assignment in a general network. The model is formulated as a linear binary integer program and can be solved by the standard branch and bound method. The model is illustrated with a couple of minimum spanning tree networks and a simplified version of the general Hong Kong mass transit railway network.     

Assessing the accuracy of the Sydney Household Travel Survey with GPS

Over the past few years, GPS has been used in a number of surveys in the US to assess the accuracy of household travel surveys. The results have been somewhat alarming in that most of these exercises have shown that the standard trip-based CATI survey conducted in the US under-reports travel by about 20–25%. It was decided to use GPS to assess the accuracy of the Sydney Household Travel Survey, a continuous survey conducted by face-to-face interviewing. The procedure used was for the interviewers to recruit households for the household travel survey in the normal manner, and then, if the household met certain criteria, to endeavour to recruit the household to also undertake a GPS survey. A small sample of about 50 households was obtained, and GPS devices successfully retrieved that measured data on the same day as the travel diary was completed. In addition, participants in the GPS survey completed a prompted recall survey a week or two later, using maps and tabulations of travel obtained from the GPS devices, to identify mode, purpose and occupancy for trips measured by the GPS, and also to check for accuracy in defining trip ends and total number of trips. Based on the analysis of the GPS compared to the diary results, it was found that respondents under-reported their travel by about 7%, which is much less than in the US CATI results. Respondents were also found to under-report travel distances and over-report travel times. There was also a high incidence of non-reporting for VKT.

What determines transit energy use?

A comparison of the energy use per passenger-mile of eight modes of urban transportation is made in terms of eleven variables, resulting in conclusions about the direction transit system design should take to provide adequate transportation with minimum energy use. The method can easily be programmed on a personal computer to be used to study the effects of parameter variations on energy use.     

Grade measurement with an instrumented car

Grade information may be needed for route surveys and is important when fuel consumption is studied. An instrumented car was used to measure acceleration along the road surface by double differentiating accumulated pulses generated off the drive train. A second acceleration measure included the component due to gravity relative to the car body. The difference between these acceleration measures contains grade information but it also influenced by suspension dynamics and pitch of the car body. The effect of suspension dynamics was removed by filtering which limited the minimum wavelength to 160 m. The effect of pitch was removed by a correction based on acceleration, jerk and the square of vehicle speed. The correction was computed from data collected on a level airfield runaway. The method is verified for a high capacity arterial road. Grade is measured to within 0.001 rad (95% confidence limits). Elevation derived from the grade data was consistent with road construction drawings to the same limits.     

Determinants of modal choice in freight transport

In the next few years, exciting developments in the field of freight transport are likely to occur. The Channel Tunnel will be perceived as giving railways much greater distance of operation, compared to the current train ferry to/from Great Britain. The further development of swap-body technology will allow easier modal transfer and the creation, in 1992, of a single market in Europe will transform the pattern of trade. All of these are likely to have significant impacts on modal choice, and hence modal split, in freight transport. Reappraisal by many firms of the modes of transport used is likely but will it result in a net transfer of freight from road to rail and, if so, to what extent? To answer such questions, an accurate and reliable method of predicting modal split is required. Research in the past has concentrated on the development of modal split models based on generalised costs. These fail to explain adequately the prevalence of road freight in the UK. From surveys of freight managers within industry, it is clear that models to date rely too heavily on the economic cost factor and too little on behavioural factors (Jeffs 1985). This paper derives from a recent study of freight transport modal choice from the standpoint of the transport decision-maker within the firm. It attempts to shed light on the actual parameters which should be incorporated into a modal split model. Many variables appear to exert an influence on modal choice decision-making process. However, it is possible to categorise them into six main groups, namely: customer-requirements; product-characteristics; company structure/organisation; government interventions; available transport facilities; and perceptions of the decision-maker him/herself. It is the interactions and inter-relationships between these which ultimately determine freight modal split. This study has shown that the relationship between the outcome of the transport decision process and the values of particular determinants of modal split is not straight-forward, due to the complexity and variety of interactions involved. Perhaps one of the main reasons for researchers' failure hitherto to develop a successful modal-split model has been the preoccupation with techniques that rely on the development of common metric (e.g. generalised cost), which has led to the exclusion of some important explanatory variables along quite different dimensions. Another important issue concerns the appropriate level of aggregation. In order not to reduce the explanatory power of the key variables, it is important to work at a disaggregate level, although this does make substantial demands on data. The use of factor analysis enables both the aggregation of information without loss of behavioural reality and the specification of variables in terms of a common metric. In conclusion, freight transport has usually been examined within too narrow a framework. It must be placed firmly within the context of the total industrial process. The demand for freight transport is directly influenced by the level, composition and geographical distribution of production and consumption activities. Freight flows are complex and so it is highly unlikely that a universal mode-choice model can ever be developed. Future research should, therefore, be directed towards developing partial models in response to specific needs of those involved in decision-taking in the freight sector.