Effects of valve timing and intake flow motion control on combustion and time-resolved HC & NOx formation characteristics

In SI engines, valve events have a major influence on volumetric efficiency, fuel economy and exhaust emissions. Moreover, swirl and tumble motions in the intake charge also improve combustion speed and quality by stratifying the mixture as well as intensifying the mixing rate of air and fuel. This paper investigates the behaviors of an engine and the combustion phenomenon for various intake valve timings and intake charge motions using CVVT system and port masking schemes. Test condition includes a part load and a cold idle condition inclusive of a cold start of the engine. Time-resolved HC and NOx emissions were also measured at an exhaust port to examine their formation mechanisms and behaviors with fast response HC/NOx analyzers. In conclusion, the fast burning of fuel and improved combustion quality by enhanced charge motions reduced unburned HC emissions, and advancing the intake valve opening reduced HC as well as NOx. Furthermore, HCs during the cold transient phase and idle conditions decreased with recalibrated start parameters such as lean air-fuel ratio and spark retardation via the enhancement of intake charge motions.     

OH-radical behavior of unsteady lifted flame based on instantaneous change of the equivalence ratio

In an earlier study, the current authors showed that an unsteady-state lifted flame generated by an equivalence ratio conversion system for a given fuel, was similar to a steady-state lifted flame in terms of the change characteristics from a premixed flame to a critical flame and then to a triple flame with a diffusion flame positioned in the middle according to the concentration difference. Therefore, this study used an OH-PLIF method to investigate the characteristics of a steady-state lifted flame and an unsteady-state lifted flame created under conditions identical to the flames in the preceding study. PLIF (Planar laser induced fluorescence) is practically effective for visualizing the concentration fields within a flame. The resulting OH-radical measurements showed that an unsteady-state lifted flame created under the specific conditions used in this study showed similar tendencies in terms of OH-radical distribution, fluorescence intensity, and liftoff height, to a steady-state lifted flame, thereby confirming that the behavior of an unsteady-state lifted flame can be effectively predicted based on the behavior of a steady-state lifted flame.     

Study of RCM-based maintenance planning for complex structures using soft computing technique

To guarantee the efficiency of maintenance strategies for a complex structure, safety and cost limitations must be considered. This research introduces RCM-based (Reliability Centered Maintenance) life cycle optimization for reasonable maintenance. The design variable is the reliability of each part, which consists of a complex structure, while the objective is to minimize the total cost function in order to maintain the system within the desired system reliability. This research constructs the cost function that can reflect the current operating condition and maintenance characteristics of individual parts by generating essential cost factors. To identify the optimal reliability of each component in a system, this paper uses a Neuro-Evolutionary technique. Additionally, this research analyzes the reliability growth of a system by using the AMSAA (Army Material Systems Analysis Activity) model to estimate the failure rate of each part. The MTBF (Mean Time Between Failure) and the failure rate of the whole system, which is responding to the individual parts, are estimated based on the history data by using neural networks. Finally, this paper presents the optimal life cycle of a complex structure by applying the optimal reliability and the estimated MTBF to the RAMS (Reliability, Availability, Maintainability, and Safety) algorithm.     

Development of a flow network simulation program part I — flow analysis

An in-house simulation program was developed that can be utilized to predict flow characteristics such as pressure and velocities in any flow network system comprising multiple flow components, i.e., pipe, pump, heat exchanger, valves, etc. Although the code is intended for applications to network flow systems in a vehicle, it is written in a generalized manner to handle any possible network configuration of flow components. Therefore, it can easily function in various industrial applications. The network system where the flow is assumed to be one-dimensional is mathematically formulated by applying two conservation rules, mass and energy, to each flow component. These rules produce a set of non-linear equations. These non-linear equations are solved iteratively by adopting the Newton-Raphson scheme. This program has been tested in many different cases to demonstrate its validity and applicability. In this paper, two examples are introduced to show how the program can be used to find solutions in real engineering problems. Throughout the study, it was found that the code can most efficiently be used to verify a proposed design concept in an early design stage of the vehicle development cycle. The thermal analysis portion of the program will be dealt with in Part II of the paper.     

The motion analysis of fire video images based on moment features and flicker frequency

In this paper, motion analysis methods based on the moment features and flicker frequency features for early fire flame from ordinary CCD video camera were proposed, and in order to describe the changing of flame and disturbance of non-flame phenomena further more, the average changing pixel number of the first-order moments of consecutive flames has been defined in the moment analysis as well. The first-order moments of all kinds of flames used in our experiments present irregularly flickering, and their average changing pixel numbers of first-order moments are greater than fire-like disturbances. For the analysis of flicker frequency of flame, which is extracted and calculated in spatial domain, and therefore it is computational simple and fast. The method of extracting flicker frequency from video images is not affected by the catalogues of combustion material and distance. In experiments, we adopted two kinds of flames, i.e. , fixed flame and movable flame. Many comparing and disturbing experiments were done and verified that the methods can be used as criteria for early fire detection.     

Geographic information system design for network equilibrium-based travel demand models

Travel demand analyses are useful for transportation planning and policy development in a study area. However, travel demand modeling faces two obstacles. First, standard practice solves the four travel components (trip generation, trip distribution, modal split and network assignment) in a sequential manner. This can result in inconsistencies and non-convergence. Second, the data required are often complex and difficult to manage. Recent advances in formal methods for network equilibrium-based travel demand modeling and computational platforms for spatial data handling can overcome these obstacles. In this paper we report on the development of a prototype geographic information system (GIS) design to support network equilibrium-based travel demand models. The GIS design has several key features, including: (i) realistic representation of the multimodal transportation network, (ii) increased likelihood of database integrity after updates, (iii) effective user interfaces, and (iv) efficient implementation of network equilibrium solution algorithms.     

Integrated imputation of activity-travel diaries incorporating the measurement of uncertainty

Procedures to transform GPS tracks into activity-travel diaries have been increasingly addressed due to their potential benefit to replace traditional methods used in travel surveys. Existing approaches for data annotation however are not sufficiently accurate, which normally involves a prompted recall survey for data validation. Imputation algorithms for transportation mode detection seem to be largely dependent on speed-related features, which may blur the quality of classification results, especially with transportation modes having similar speeds. Therefore, in this paper we propose an enhanced integrated imputation approach by incorporating the critical indicators related to trip patterns, reflecting the effects of uncertain travel environments, including bus stops and speed percentiles. A two-step procedure which embeds a segmentation model and a transportation mode inference model is designed and examined based on purified prompted recall data collected in a large-scale travel survey. Results show the superior performance of the proposed approach, where the overall accuracy at trip level reaches 93.2% and 88.1% for training and surveyed data, respectively.     

海运教育与培训以及操船模拟器的国际展望

着重对操船模拟器的作用、技术条件、质量保证进行了专业分析,同时阐述了其在海运教育与培训中的作用,以及这两个领域的国际协作前景。     

Fine sediment deposits in shelf seas

From field observations it appears that the top layer of a shelf bottom in general exhibits an intricate geographical pattern of sediment formations. Sediments of different composition are confined in distinct regions. This contradicts the idea that current and wave forces stir up bottom sediment and disperse it in a random way over the shelf; the dispersal process is counteracted by sorting mechanisms. In this paper the bottom patterns of fine cohesive sediments are considered. A specific sorting mechanism is studied which may explain the patchy structure of fine sediment deposits. It is shown that fine sediments can be trapped in bottom deposits which contain a fine sediment fraction high enough to prevent pore water motion in the shelf bed. This mechanism opposes sediment dispersal away from existing deposits. It may also explain the formation or the preservation of mud patches, even in regions where the bottom shear stress is relatively high.     

Assimilation of sea surface temperature in the POL Coastal Ocean Modelling System

A one-dimensional scheme is used to assimilate satellite Sea Surface Temperature data into the Proudman Oceanographic Laboratory Coastal Ocean Modelling System, set up in the Irish Sea with a fine resolution ( 1.8 km). The capabilities of the assimilation scheme are investigated using two different sets of satellite data, of lower and similar resolution to that of the model respectively. Comparison of results with independent data show that assimilation improves the modelled Sea Surface Temperature, but does not address model representation of the temperature vertical structure. It is concluded that for the Irish Sea and at the scales resolved by the model, the assimilation problem cannot be approached in a one-dimensional framework. It is also pointed out that forecast error needs to account explicitly for errors in the representation of the vertical structure of the thermal field.Three-dimensional methods that are suited for coastal systems are then suggested.