Turbo-Coded Modulation of EVRC Speech Encoder with Unequal Error Protection for Fading Channels

The Enhanced Variable Rate Codec (EVRC) is a standard for the Speech Service Opti6n 3 for Wideband Spread Spectrum Digital System, which has been employed in both IS-95 cellular systems and ANSI J-STC-008 PCS (Personal Communications Systems). This paper investigated the combination of turbo codes with Unequal Error Protection (UEP) and 16-QAM modulation for EVRC codec of Rate 1 to get power and bandwidth efficient coding scheme. The results show that the UEP system outperforms the Equal Error Protection (EEP) one by 1.45dB at BER of 10^-5.     

Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans

A hybrid electric vehicle (HEV) is a vehicle that combines a conventional propulsion system with an on-board rechargeable energy storage system to achieve better fuel economy than a conventional vehicle HEVs do not have limited ranges like battery electric vehicles, which use batteries charged by an external source. The different propulsion power systems may have common subsystems or components. The objective of this study is to compare the fuel economies of a conventional step van, a series hybrid electric step van (HESV), and a parallel HESV by calculating the fuel consumption using the ADVISOR software by NREL. We also showed the results of the vehicles in different driving cycles including the Central Business District bus cycles, the New York City Cycle, and the US EPA City and Highway cycles.     

Belt routing and safety assessment through computer simulation

Most of the research on safety belt systems has involved crash simulation that only considered a dynamic human model. However, belt routing analysis, usually known as comfort level estimation, is also an important factor in safety belt design, considering that serious injuries of the abdominal region result from the infiltration of a belt into the neck or the chest. Thus, safety belt evaluations using kinematic human models are also needed. In this paper, a belt fit simulation method is suggested. Using the proposed process, both comfort and safety analyses can be performed under the same conditions continuously, and thus the safety belt design parameters, such as the location of anchor points, dummy posture and etc., can be evaluated. In conclusion, this computer process enables a belt system design to reduce injuries.     

Performance of air conditioners with a gas-liquid separation condenser and one-tank laminated evaporator

In this study, a parallel flow condenser and laminated evaporator for an automotive air-conditioning system were modified to improve performance. Gas-liquid separation type condensers, in which the condenser and receiver drier are integrated, and one-tank laminated type evaporators were developed, and their performances were investigated experimentally using HFC-134a. Heat transfer characteristics in the condenser are examined by means of air temperature, air velocity entering the condenser and inlet pressure of the refrigerant; heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, flow rate of air, outlet pressure of refrigerant and superheat. Pressure drops for both evaporator and condenser are also measured, and correlations for pressure drop are derived for the condenser and evaporator, respectively. Air velocity and mass flow rate of the refrigerant have a significant effect on the overall heat transfer coefficient, and flow pass is not significantly influenced by the cooling capacity of the condenser. The overall heat transfer coefficient of the evaporator increases as air flow rate, air temperature and relative humidity increases.     

Theoretical method for predicting the weight reduction rate of a box-type car body for rolling stock by material substitution design

In this paper, a theoretical approach is suggested for predicting the structural performances and weight reduction rate of a car body with a box-type section when its material is substituted with a lightweight material for weight saving. For the material substitution design of a car body for rolling stock, bending, axial, and twisting deformations should be considered at constant stiffness and strength conditions. To compare the weight reduction effects on different material applications, some new indices were derived from a structural performance point of view. The derived indices provide good measures to estimate weight reduction by material substitution design and can be effectively applied to the conceptual design of a car body.     

Vehicle detection system design based on stereo vision sensors

Vehicle detection is a crucial issue for driver assistance system as well as for autonomous vehicle guidance function and it has to be performed with high reliability to avoid any potential collision. The vision-based vehicle detection systems are regarded promising for this purpose because they require little infrastructure on a highway. However, the feasibility of these systems in passenger car requires accurate and robust sensing performance. In this paper, a vehicle detection system using stereo vision sensors is developed. This system utilizes feature extraction, epipoplar constraint and feature matching in order to robustly detect the initial corresponding pairs. The proposed system can detect a leading vehicle in front and can estimate its position parameters such as the distance and heading angle. After the initial detection, the system executes the tracking algorithm for the vehicles in the lane. The proposed vehicle detection system is implemented on a passenger car and its performances are verified experimentally.     

我在，故我赢红牛车手维特尔

“如果2009年的开局并不是我们现在所看到的,我认为我们已经驾驶着RB5赢得了世界冠军,因为我们有F1里最的底盘”。克里斯蒂安·霍纳如是说。     

Crash protection of Hybrid Electrical Vehicles for amending the KMVSS No. 91

This paper explores issues related to the electrical safety of Hybrid Electrical Vehicles (HEVs) during and after various crash events. Japanese and American federal regulations regarding occupant protection against high voltages in Electric Vehicles (EVs) and HEVs were surveyed and analyzed in this study. Front, side and rear impact tests for two types of HEVs were conducted to investigate electrolyte spillage, the retention of the propulsion battery system and the electrical isolation of the occupant. The test results met the related criteria. The test procedures and the criteria for occupant protection established through this study were amended to Korean Motor Vehicle Safety Standard (KMVSS) No. 91 to add the crash protection of the EVs and the HEVs.     

Parameter matchin and optimization for a hydraulic power-assistant system

A hydraulic power-assist system is a hydraulic regeneration system that can significantly improve fuel economy when installed on a conventional bus operating in urban traffic. This paper presents a methodology for matching a new hydraulic power-assist system (HPA) to a conventional bus. The HPA and the conventional bus were modeled using the AMESim environment. The HPA was optimized using a simulation-based orthogonal design method with two indexes, the fuel economy and the acceleration performance. According to the simulation results, the volume of the accumulator was the primary factor affecting fuel economy, and the gear ratio of the transfer case was the primary factor influencing the acceleration performance. As a result, tradeoffs between the two indexes are required for a practical operational scenario. Experimental results demonstrated that the optimal HPA installed on a conventional bus was able to satisfy the acceleration performance requirement of the vehicle and also reduced fuel consumption by 25 percent.     

Robust optimization design method for powertrain mounting systems based on six sigma quality control criteria

This paper presents a robust optimization design method based on Six Sigma quality control criteria to improve the design of a powertrain mounting system (PMS). The powertrain is modeled as a rigid body having six degrees of freedom (DOF) connected to a rigid base by four rubber mounts, and each mount is simplified as a three-dimensional spring-damper element in its local coordinate system (LCS). The calculation method based on energy decoupling is used to estimate the decoupling ratios of a PMS. The location and static stiffness of each mount and the orientations of the two anti-torsion mounts are selected as uncertain design variables, and the nominal values of these design variables are optimized to obtain a robust Six Sigma design for a PMS. The uncertain design variables are characterized by a perturbation or percent variation around their nominal values. The generalized reduced gradient (LSGRG2) optimization method is employed to solve the robust optimization problem, and a second-order Taylor series expansion is used to estimate the statistical properties of the performance constraints and objectives. The optimization results show that the robust design ensures good robustness or high reliability for the natural frequencies, decoupling ratios, and frequency separation constraints of a PMS.