Egg production and associated losses of carbon, nitrogen and fatty acids from maternal biomass in Calanus finmarchicus before the spring bloom

We present concurrent data on ingestion, egg production and the loss of maternal biomass in pre-spring bloom female Calanus finmarchicus incubated under conditions representative of those in situ in the North Atlantic. A balanced metabolic budget was constructed and used to examine the relative importance of ingestion and biomass for fuelling egg production during the incubations. Ingested carbon was not sufficient to meet the observed demands for egg production. More than 80% of the carbon utilised by the females was instead derived from their biomass. Fatty acid analysis demonstrated that the storage reserves, 20:1 (n−9) and 22:1 (n−11), were virtually absent before experimentation began, and therefore could not have been used to supply the carbon required for egg production during the incubations. The C:N mass-specific ratio of the biomass utilised was 4.1, suggesting that the females had instead catabolised protein in order to meet their metabolic demands. These results suggest that C. finmarchicus adopts a sacrificial reproductive strategy when food availability is low.     

Shared pilot passage plan and navigational safety during pilotage

Navigating in confined waters with a pilot aboard requires that the pilot’s intention and plan is understood by all present on the bridge. The present study investigates the effect of having a detailed route plan and monitoring it in the context of pilotage. The aim was to see how the presence of a shared pilot passage plan in the Electronic Chart Display and Information System (ECDIS) affects the identification and recovery from navigational errors made by a pilot. Twenty participants, 10 with a shared route plan and 10 without, participated as navigators in a simulator scenario involving pilotage in the Oslofjord. Participants were bachelor students in nautical science. The navigation scenarios involved the intentional error by the pilot just before a predefined way point. Three measurements of relevance to navigational safety were recorded: (1) the time it took the participant to express concern, (2) the time it took the participant to correct the error (‘time to recovery’), and (3) the number of groundings. The study revealed that time to express concern and time to recovery were significantly much shorter for the group with a shared pilot passage plan presented in ECDIS than for the group without such a plan. Providing a bridge team with a shared pilot passage plan in ECDIS during pilotage might improve the ability to identify and correct navigational errors.     

Transient design waves for green-water loading on bulk carriers

The wave surface profiles associated with extreme relative motion between a slender stationary vessel and the adjacent wave surface are investigated for long-crested head seas. The methodology is based upon an established statistical relationship for a Gaussian random process which indi-cates that in the vicinity of an extreme event the most probable shape of the time history approaches that of the autocorrelation function. Attention is given to the relative motion at a longitudinal position which is representative of the No. 1 hatch cover location on a bulk carrier. Second-order corrections to the wave surface profiles are used to provide estimates of nonlinear relative motions. It is shown that extreme relative motion at the hatch cover location is associated with the vessel encountering a steep-fronted wave with pronounced asymmetry in the horizontal and vertical directions. In order to evaluate the exceedence probabilities, it is hypothesized that the peaks of the nonlinear relative motions are closely correlated with the peaks of an underlying linear process. The overall methodology is applied to an investigation of relative motion exceedence probabilities for vessel lengths of 250 m and 300 m over a range of survival seastates. Received: July, 1999 / Accepted: November, 1999     

Transport of radionuclides by sea-ice and dense-water formed in western Kara Sea flaw leads

A transport assessment of particle-bound and dissolved artificial radionuclides (¹³⁷Cs and ^239,240Pu) by sea-ice and dense-water formed in western Kara Sea flaw leads close to the Novaya Zemlya dumping sites is presented in this study. We both performed a “best estimate” based on available data, and a “maximum assessment” relying on simulated constant releases of 1 TBq ¹³⁷Cs and ^239,240Pu from individual dumping bays. The estimates are based on a combination of (i) the content of particulate matter in sea-ice; (ii) analytical data and numerical simulations of radionuclide concentrations in shelf surface deposits, suspended particulate matter (SPM), and the dissolved phase; and (iii) estimates of lead-ice and dense-water formation rates as well as modeling results of local ice drift pathways. In the “best estimate” case, 2.90 GBq ¹³⁷Cs and 0.51 GBq ^239,240Pu attached to sea-ice sediments can be exported from the lead areas toward the central Arctic basin. The radionuclide burden of the annually formed dense lead water in the “best estimate” amounts to 4.68 TBq ¹³⁷Cs and 0.014 TBq ^239,240Pu. In the “maximum assessment”, potential export-rates of ice-particle bound ¹³⁷Cs and ^239,240Pu toward the central Arctic would amount to 0.64 and 0.16 TBq, respectively. As much as ≈900 TBq ¹³⁷Cs and ≈6.75 TBq ^239,240Pu could be annually taken up by 34.75 dense-water rejected in the lead area. Assuming the (unlikely) instantaneous release of the total ¹³⁷Cs and ^239,240Pu inventories (≈1 PBq and 10 TBq, respectively) from the Novaya Zemlya dumping sites into the dissolved phase, the dense lead water locally formed during one winter season could take up ≈90% of the Cs and ≈68% of the Pu released.     

Altimeter assimilation in the OCCAM global model: Part I: A twin experiment

An altimeter data assimilation scheme has been tested in the OCCAM (Ocean Circulation and Climate Advanced Modelling) global 1/4°, 36-level model using a twin experiment format. The Cooper and Haines displacement scheme is used. The method works well in most regions and depths. Currents and densities in the top 1000 m generally improve by over 50–70% after 5 months of sea level assimilation every 15 days. Below 1000 m, an error reduction of up to 50% is achieved. The errors remain low during a further 60-day run without assimilation. Diagnostics for the North Atlantic, the Tropical Pacific and the Antarctic Circumpolar Current are shown alongside the global averages.The main problems encountered were in weakly stratified regions of the Antarctic and Arctic seas. A scale selective filter is developed to avoid assimilating scales much larger than the local deformation radius, and this avoids the adverse assimilation effects in the southern oceans. A companion paper uses this scheme to assimilate TOPEX and ERS-1 altimeter maps.     

Error quantification of a high-resolution coupled hydrodynamic-ecosystem coastal-ocean model: Part 2. Chlorophyll-a, nutrients and SPM

Marine systems models are becoming increasingly complex and sophisticated, but far too little attention has been paid to model errors and the extent to which model outputs actually relate to ecosystem processes. Here we describe the application of summary error statistics to a complex 3D model (POLCOMS-ERSEM) run for the period 1988–1989 in the southern North Sea utilising information from the North Sea Project, which collected a wealth of observational data. We demonstrate that to understand model data misfit and the mechanisms creating errors, we need to use a hierarchy of techniques, including simple correlations, model bias, model efficiency, binary discriminator analysis and the distribution of model errors to assess model errors spatially and temporally. We also demonstrate that a linear cost function is an inappropriate measure of misfit. This analysis indicates that the model has some skill for all variables analysed. A summary plot of model performance indicates that model performance deteriorates as we move through the ecosystem from the physics, to the nutrients and plankton.     

Quantifying uncertainty in high-resolution coupled hydrodynamic-ecosystem models

Marine ecosystem models are becoming increasingly complex and sophisticated, and are being used to estimate the effects of future changes in the earth system with a view to informing important policy decisions. Despite their potential importance, far too little attention has been, and is generally, paid to model errors and the extent to which model outputs actually relate to real-world processes. With the increasing complexity of the models themselves comes an increasing complexity among model results. If we are to develop useful modelling tools for the marine environment we need to be able to understand and quantify the uncertainties inherent in the simulations. Analysing errors within highly multivariate model outputs, and relating them to even more complex and multivariate observational data, are not trivial tasks. Here we describe the application of a series of techniques, including a 2-stage self-organising map (SOM), non-parametric multivariate analysis, and error statistics, to a complex spatio-temporal model run for the period 1988–1989 in the Southern North Sea, coinciding with the North Sea Project which collected a wealth of observational data. We use model output, large spatio-temporally resolved data sets and a combination of methodologies (SOM, MDS, uncertainty metrics) to simplify the problem and to provide tractable information on model performance. The use of a SOM as a clustering tool allows us to simplify the dimensions of the problem while the use of MDS on independent data grouped according to the SOM classification allows us to validate the SOM. The combination of classification and uncertainty metrics allows us to pinpoint the variables and associated processes which require attention in each region. We recommend the use of this combination of techniques for simplifying complex comparisons of model outputs with real data, and analysis of error distributions.     

Dynamic response of offshore jacket structures under random loads

In this paper, the dynamic response of a scale model of a jacket offshore structure is investigated both theoretically and experimentally. The experiments were conducted both in air and in water. The in-water experiments were done in the towing tank of Memorial University to simulate the realistic operating conditions. The model was subjected to random wave loads. Froude's law of modeling was used to obtain the dimensions of the scale model based on the dimensions of an existing structure. The effects of varying the structure's weight, and the characteristics of the wave loading were investigated. The structure's weight was changed by adding weights to the structure's deck. A finite element model was designed to determine the dynamic response of the model. Excellent agreement between the experimental and theoretical results was obtained.The reaction force at the foundation was estimated from strain measurements and compared with the finite element calculations. Fair agreement was obtained.This work is the first stage of a project whose objective is to develop a method for structural damage detection using the free vibration response of the structure. The free vibration response will be obtained from the stationary random response of the structure using the random decrement method. Having an accurate model to describe the dynamic response of the structure is the first step in this study.     

Tests on ultimate strength of hull box girders made of high tensile steel

The experimental results of the collapse of three box girders subjected to pure bending moment are presented. The structures are made of high tensile steel of 690 MPa of nominal yield stress reinforced with bar stiffeners of the same material. The moment curvature curves are presented covering the pre- and post-collapse regions. The modes of collapse for each box girder are discussed considering the variation on the panel's slenderness. The concept of efficiency of high tensile steel structures is introduced. The concept is very useful to identify the governing parameters affecting the ultimate strength of 3D structures under predominant bending moment.