Steel product flows: works-to-port: an application of the 'transportation problem'

The pattern of landward flows of steel products between manufacturing works and ports in the United Kingdom used for export is examined, and the spatial implications of various levels of hypothetical rationalization in the distribution of port facilities discussed. While extreme spatial concentration of port facilities for handling general steels would seem both impracticable and undesirable, the analysis suggests that a greater degree of rationalization than at present could be achieved without increasing overall landward transport costs.     

Effect of regenerative braking energy on battery current balance in a parallel hybrid gasoline-electric vehicle under FTP-75 driving mode

In recent years, a hybrid electric vehicle (HEV) has been considered a successful technology. Especially, in case of a full HEV, the motor can drive the vehicle by itself at low velocity or assist the engine at high load. To improve the hybrid electric vehicle’s efficiency, a regenerative braking system is also applied to recover from kinetic energy. In this study, an experimental control apparatus was set up with a parallel hybrid electric vehicle mounted on a chassis dynamometer to measure ECU (engine control unit) and MCU (motor control unit) signals, including the current and state of charge in the battery. In order to analyze regenerative braking characteristics, user define braking driving cycle was introduced and carried out using different initial velocities and braking times. The FTP 75 driving cycle was then adapted under different initial SOC (state of charge) levels. The experiment data was analyzed in accordance with the vehicle velocity, battery current, instant SOC level, motor RPM, engine RPM, and then vehicle driving mode was decided. In case of braking driving cycle, it was observed that SOC were increased up to 1.5 % when the braking time and the velocidy were 6 second and 60 km/h, respectively. In addition, using the FTP 75 driving cycle, mode 1 was most frequently operated at SOC 65 conditions in phase 1. In phase 2, due to frequent stop-go hills, percentage of mode 1 was increase by 22 %. Eventually, despite of identity, it was shown that the characteristics of phase 3 differed from phase 1 due to the evanishment of the effects of initial SOCs.     

Development of route information based driving control algorithm for a range-extended electric vehicle

A route information based driving control algorithm was developed for an RE-EV which consists of two motorgenerators, MG1 and MG2. A threshold power which controls the engine on/off to charge the battery was obtained by an optimization process using route information, such as the vehicle velocity and altitude. The threshold power allows the vehicle to travel to the final destination while making the final battery SOC close to SOC _low. Using the threshold power, route based control (RBC) was proposed by considering the driver’s characteristics and traffic conditions using the driving data base. In addition, a relationship between the threshold power and various initial battery SOC was obtained by off-line optimization. The performance of the RBC was evaluated by simulation and human-in-the-loop simulation (HILS) for city driving. It was found from the simulation and HILS results that the RBC achieved approximately 4 % to 12 % reduction in fuel consumption compared to the existing charge depleting/charge sustaining (CD/CS) driving control.     

Modelling daily activity program generation considering within-day and day-to-day dynamics in activity-travel behaviour

This paper presents a comprehensive econometric modelling framework for daily activity program generation. It is for day-specific activity program generations of a week-long time span. Activity types considered are 15 generic categories of non-skeletal and flexible activities. Under the daily time budget and non-negativity of participation rate constraints, the models predict optimal sets of frequencies of the activities under consideration (given the average duration of each activity type). The daily time budget considers at-home basic needs and night sleep activities together as a composite activity. The concept of composite activity ensures the dynamics and continuity of time allocation and activity/travel behaviour by encapsulating altogether the activity types that are not of our direct interest in travel demand modelling. Workers’ total working hours (skeletal activity and not a part of the non-skeletal activity time budget) are considered as a variable in the models to accommodate the scheduling effects inside the generation model of non-skeletal activities. Incorporation of previous day’s total executed activities as variables introduces day-to-day dynamics into the activity program generation models. The possibility of zero frequency of any specific activity under consideration is ensured by the Kuhn-Tucker optimality conditions used for formulating the model structure. Models use the concept of random utility maximization approach to derive activity program set. Estimations of the empirical models are done using the 2002–2003 CHASE survey data set collected in Toronto.

A reference-dependent user equilibrium model for activity-travel scheduling

Existing user equilibrium models of activity-travel scheduling generally fall short in representing travelers’ decision-making processes. The majority have either implicitly or explicitly assumed that travelers follow the principle of utility maximization. This assumption ignores the fact that individuals may be loss–averse when making activity-travel decisions. Allowing for the situation that travelers possess accurate information of the urban-transportation system due to modern technologies, studies on reference-dependent decision-making under near-perfect information are receiving increasing attention. In view of traveler heterogeneity, individuals can be divided into multiple classes according to their reference points. In this paper, we propose a reference-dependent multi-class user equilibrium model for activity-travel scheduling, which can be reformulated as a variational inequality problem. Moreover, comparative analyses are conducted on the equilibrium states between utility-maximization (no reference) and reference-dependency of exogenous and endogenous references. A numerical example regarding combined departure-time and mode choice for commuting is conducted to illustrate the proposed model. The simulated results indicate that reference points and loss aversion attitudes have significant effects on the choice of departure time and mode.     

New routes on old railways: increasing rail’s mode share within the constraints of the existing railway network

This paper describes an integrated methodology for identifying potential ‘quick wins’ for mode shift from road to passenger rail transport. Firstly, a procedure for analysing rail’s relative competitiveness in the market for passenger transport between large urban areas is developed and then applied to a UK case study. The purpose of such analysis is to allow the identification of flows where rail is currently relatively uncompetitive (in terms of journey time in particular) and to assess the reasons for this poor performance, so that the issues which suppress rail use may be addressed. In parallel, a framework, methodology and tool for the assessment of existing and potential capacity (trains, seats, TEUs, etc.) is developed for both passenger and freight traffic, to identify and address network constraints. An illustrative example of the use of these demand and capacity assessment tools is then presented, with the tools used to identify and evaluate flows where rail demand is suppressed by poor service quality and where spare capacity exists which would allow the passenger rail service to be improved without requiring significant investments in infrastructure. The effects of such improvements on demand are predicted, and the cost implications of operating such additional services are discussed. The analysis suggests that there may be significant potential for increasing rail’s mode share by providing additional inter-urban services where rail currently offers an inferior service.     

New nonlinear bushing model for general excitations using Bouc-Wen hysteretic model

Because the characteristics of rubber bushing significantly affect the accuracy of vehicle dynamics simulations, they should be accurately modeled in the vehicle suspension model. In this paper, a new nonlinear bushing model for automotive bushing components is developed to improve the accuracy of vehicle dynamics analysis. Bushing components were first tested to capture the nonlinear and hysteretic behavior of typical elements by using a MTS 3-axis elastomer tester. A simple Bouc-Wen hysteretic differential model was modified to generate a more precise rubber bushing model. A sine wave, step input, and random excitations are imposed on the bushing. The ADAMS program is used to calculate sensitivity and the VisualDOC program is employed to find the optimal parameters for the bushing model. An error function is designed to find optimal parameters of the model. Parameter identification is carried out to satisfy the static and dynamic characteristics due to sine and step excitation inputs. It was proved that the proposed model could predict the bushing forces under sine, step, and random inputs well. The errors are within 10% in the overall range. To show the validity of the proposed model, a numerical example was also carried out. Because the bushing forces due to random excitation input show good agreement with experiments, the proposed bushing model is available in the vehicle dynamics simulation.     

REGULATION OF THE INTERFERON－INDUCIBLE PROTEIN KINASEPKR AND2＇5＇ OLIGOADENYLATE SYNTHETASE BY A CATALYTICALLY INACTIVE PKR M

ＲＥＧＵＬＡＴＩＯＮＯＦＴＨＥＩＮＴＥＲＦＥＲＯＮ－ＩＮＤＵＣＩＢＬＥＰＲＯＴＥＩＮＫＩＮＡＳＥＰＫＲＡＮＤ２＇５＇ＯＬＩＧＯＡＤＥＮＹＬＡＴＥＳＹＮＴＨＥＴＡＳＥＢＹＡＣＡＴＡＬＹＴＩＣＡＬＬＹＩＮＡＣＴＩＶＥＰＫＲ　ＭＵＴＡＮＴＴＨＲＯＵＧＨ　Ｃ...     

REVERSAL OF THE DOUBLE－STRANDED－RNA－INDUCED INHIBITION OF PROTEIN SYNTHESIS BY A CATALYTICALLY INACTIVE MUTANT OF THE PROTEIN

ＲＥＶＥＲＳＡＬＯＦＴＨＥＤＯＵＢＬＥ－ＳＴＲＡＮＤＥＤ－ＲＮＡ－ＩＮＤＵＣＥＤＩＮＨＩＢＩＴＩＯＮＯＦＰＲＯＴＥＩＮＳＹＮＴＨＥＳＩＳＢＹＡＣＡＴＡＬＹＴＩＣＡＬＬＹＩＮＡＣＴＩＶＥＭＵＴＡＮＴＯＦＴＨＥＰＲＯＴＥＩＮ　ＫＩＮＡＳＥＰＫＲＴｙｓｏｎ...     

DIETARY MAGNESIUM DEFICIENCY INCREASES LEVELS AND FUNCTION OF Giα IN THE RAT HEART AFTER MYOCARDIAL INFARCTION

ＤＩＥＴＡＲＹＭＡＧＮＥＳＩＵＭＤＥＦＩＣＩＥＮＣＹＩＮＣＲＥＡＳＥＳＬＥＶＥＬＳＡＮＤＦＵＮＣＴＩＯＮＯＦＧｉαＩＮＴＨＥＲＡＴＨＥＡＲＴＡＦＴＥＲＭＹＯＣＡＲＤＩＡＬＩＮＦＡＲＣＴＩＯＮＳｈｉＢｉｎｇ；Ｊ．Ｅ．Ｈｅａｖｎｅｒ，Ｌ．Ｍ．Ｂｏｙｌａｎ...