Effect of fuel stratification on initial flame development: Part 3-high swirl condition

This paper discusses the final investigation into the effect of fuel stratification on flame propagation. In previous works, the characteristics under the no port-generated swirl condition and the low-swirl condition were considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single-cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagation direction. The results show that the LML is expanded remarkably under the high-swirl cases up to the highest relative AFRs of 1.71 and 1.75 between 140 and 160CA. In addition, similar to the low-swirl condition, the flame-flow interaction determines the direction of flame propagation, and the governing roles of the two factors vary according to the swirl level; the flow is more important at the higher swirl conditions, and the flame is more important at the lower swirl condition. Finally, fast and stable flame propagation can be achieved under the preferably stratified condition, which is induced by the suitable combination of the high swirl and injection timing.     

出行者特征要素对公交服务模式的影响分析

公共交通是面向大众的服务,公共交通服务模式的制定与完善需要重点考虑出行者的出行需求,才能从根本上提高公共交通的竞争力。借鉴服务经济学的理论将公共交通服务模式分为公交服务标准、出行者界面、公交服务环境和技术4个维度。基于攀枝花市居民出行调查与公交专项调查数据,应用SPSS定量分析出行者特征要素与公交服务选择的相关性,以考察研究出行者对于公交服务的需求,并提出改善策略。通过研究表明,出行目的、出行时间、职业和年龄与公交服务模式的相关性较大。     

两种直接波浪能转换系统性能的比较:阿基米德波浪摆和波能浮筒(英文)

Many wave energy conversion devices have not been well received. The main reasons are that they are too complicated and not economical. However, in the last two decades direct conversion systems have drawn the attention of researchers to their widely distributed energy source due to their simple structure and low cost. The most well-known direct conversion systems presently in use include the Archimedes Wave Swing (AWS) and Power Buoy (PB). In this paper, these two systems were simulated in the same conditions and their behaviors were studied in different wave conditions. In order to verify the simulations, results of the generator of the finite element computations were followed. An attempt was made to determine the merits and drawbacks of each method under different wave conditions by comparing the performance of the two systems. The wave conditions suitable for each system were specified.     

双通线加热的热力学及实验分析(英文)

The present investigation deals with process analysis of oxy-acetylene flame assisted double pass line heating for varying plate thickness. oxy-acetylene flame as the heat source for multi pass line heating to achieve 3-D bending of plates with varying thicknesses was studied. The oxy-acetylene flame was modeled as the moving heat source in the FEM analysis. The transient thermal histories were predicted taking into account the temperature dependent thermo-mechanical properties. A comparative study between single pass and double pass line heating residual deformation was also carried out. The temperature distribution and residual deformations predicted by the numerical model developed in the present work compared fairly well with those of the experimental ones.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

A multiobjective chance constrained programming model for supplier selection under uncertainty

Risk management is an inherent part of supplier selection. While companies are enjoying the benefits of outsourcing, risks brought by this practice should be taken into account in the process of decision making. This paper presents a multiobjective stochastic sequential supplier allocation model to help in supplier selection under uncertainty. Demand for products, capacities at suppliers as well as transportation and other variable costs are the main sources of uncertainty and are modeled using probability distributions. Disruptions are exogenous events and the model provides proactive mitigation strategies against disruptions by assigning backup suppliers who can be used in case of a default at a primary supplier. When there is no disruption, the model’s solution is an optimal supplier order assignment, considering operational risks.     

A frequency-based maritime container assignment model

This paper transfers the classic frequency-based transit assignment method of Spiess and Florian to containers demonstrating its promise as the basis for a global maritime container assignment model. In this model, containers are carried by shipping lines operating strings (or port rotations) with given service frequencies. An origin–destination matrix of full containers is assigned to these strings to minimize sailing time plus container dwell time at the origin port and any intermediate transhipment ports. This necessitated two significant model extensions. The first involves the repositioning of empty containers so that a net outflow of full containers from any port is balanced by a net inflow of empty containers, and vice versa. As with full containers, empty containers are repositioned to minimize the sum of sailing and dwell time, with a facility to discount the dwell time of empty containers in recognition of the absence of inventory. The second involves the inclusion of an upper limit to the maximum number of container moves per unit time at any port. The dual variable for this constraint provides a shadow price, or surcharge, for loading or unloading a container at a congested port. Insight into the interpretation of the dual variables is given by proposition and proof. Model behaviour is illustrated by a simple numerical example. The paper concludes by considering the next steps toward realising a container assignment model that can, amongst other things, support the assessment of supply chain vulnerability to maritime disruptions.     

A single-period analysis of a two-echelon inventory system with dependent supply uncertainty

Disruptions and random supplies have been important sources of uncertainty that should be considered in the design and control of supply chains. There have been many real world examples in which a single catastrophic event has simultaneously degraded the capabilities of several suppliers leading to considerable erosion of profits and goodwill for a company. However, the literature on analytical models that account for the dependence nature of disruptions and its impact on supply chain performance is sparse.In this paper, we consider an m-manufacturer, 1-retailer, newsvendor inventory system with stochastically dependent manufacturing capacities, caused by random disruptions that may simultaneously inflict damages to the capacities of the manufacturers. We develop the structural/analytical properties of key performance measures and optimal inventory policies for the multi-source and assembly inventory systems. We show that stochastic dependence in disruptions can have opposite effects on system performance in the multi-source and assembly systems. While risk diversification is preferred in the multi-source system, risk concentration is preferred in the assembly system. Our results also suggest that, if the retailer ignores the effect of dependent disruptions, then in the multi-source structure, it would underestimate the cost, overestimate the fill rate, and order more units than the optimum; however, in the assembly structure, the opposite would happen. We perform a comprehensive numerical study to validate our analytical results and generate useful managerial and operational insights for effective risk management of supply chains in the presence of dependent supply uncertainty.     

Competition and disruption in a dynamic urban supply chain

Rapid changes and complexities in business environments have stressed the importance of interactions between partners and competitors, leading supply chains to become the most important element of contemporary business environments. There is a concomitant need for foresight in describing supply chain performance in all operating environments, including those involving punctuated disruptions. Furthermore, the urban metropolis is now widely recognized to be an environment which is especially vulnerable to supply chain disruptions and for which integrated supply chain decisions can produce very substantial net benefits. Accordingly, this paper presents a dynamic supply chain network model formulated as a differential variational inequality; the model is fashioned to allow consideration of supply chain disruption threats to producers, freight carriers, and retail enterprises. The DVI is solved using a fixed-point algorithm, and a simple numerical example, introduced to illustrate how the impacts of supply chain disruptions may be quantified, is presented.