Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Analysis of the effectiveness of control measures to mitigate road dust emissions in a regional network

The effectiveness of control measures to reduce road dust emissions is analyzed using a year’s data of road dust emissions collected with a mobile sampling platform and a survey of road maintenance practices in the Lake Tahoe Basin of Nevada and California US. Attributes such as sweeping practices, anti-icing, shoulder improvement, pavement condition, trackout, and abrasive material from road segments were analyzed with a feature subset selection algorithm. Street sweeping was found to be an effective means of controlling dust emissions from roads. Road dust from dirty tertiary roads served as a continuous source of suspendable material for adjacent high-speed roads in the winter time. To be most effective, emission control strategies require that not only primary roads, but all roads be swept after snow storms to recover applied abrasive material.     

Sub‐optimal decision‐making and the transportation problem

A modification to the transportation problem is outlined that aims to improve the quality of predictions of trip matrices, and at the same time, allow some behavioural and economic insights. A framework is suggested within which this modification may be made and a suitable statistic and iterative process are described. A simple example demonstrates the validity of the modification and suggests some areas of difficulty with the approach.     

Intelligent transport systems solutions in transitional countries: The case of Korea

Transport policy in Korea is driven by the need to cope with ever-worsening traffic conditions. The development of an intelligent transport systems (ITS) Master Plan for Korea is of particular interest and demonstrates the heavy reliance placed on ITS measures to facilitate both the management of congested (but expanding) highway networks and to encourage a shift to greater use of public transport. The paper highlights the major achievements of ITS in Korea by assessing the evidence provided by the widespread implementation of ITS technologies (such as the creation of 'showcase' demonstrations). Some observations from the implementation of ITS in (so-called) transitional economies are presented.     

Towards integrated traveller information

Traveller information provision has become a key government priority in the UK following the publication of its Transport White Paper in July 1998. Developments are already underway for the integration of information systems across different public transport modes and between public transport information systems covering different regions. The Highways Agency (which is responsible for managing the strategic road network in the UK) is also advancing in its development of information databases and systems for the motorist. This paper considers the prospect of providing travellers with multimodal information with integration of driver information with public transport information. If such integration can be achieved then travellers, and in particular drivers, have the prospect of being presented with comparable information on travel options across modes. An integrated information service has a great potential to inform and influence travel choices. The paper considers the issue of travel choices and the role that information can play particularly in the context of mode choice. The political (UK) and technological climate for information provision is outlined. The paper identifies issues that will need to be addressed to identify the requirements from, and potential benefits of, integrated information, and the obstacles and challenges likely to be faced in moving towards it. Driver reactions, in particular, to the prospect of integrated information provision are fundamental to the assessment of its potential importance and value.     

Review of computer software for traffic engineers

The mid‐1970s saw the initiation of several lengthy research and development programmes in the United Kingdom which culminated in a range of software for the traffic engineer. The early 1980s brought cheap, powerful microcomputers, thereby enabling the facilities offered by the software to be exploited to the full. This article describes the range of programs now available and in common usage for the design and appraisal of traffic management schemes in the United Kingdom, and suggests a few of the areas where some research and development effort is still needed.     

One city,three models: comparison of land‐use/transport policy simulation models for Dortmund

The paper reports on simulation experiments conducted by the International Study Group on Land‐Use/Transport Interaction (ISGLUTI) for the metropolitan region of Dortmund in the Federal Republic of Germany. Three land‐use/transport simulation models were applied to the Dortmund region: the DORTMUND model developed at the University of Dortmund, the LILT model being used at University College London and the MEPLAN package developed by Marcial Echenique & Partners in Cambridge. The three models are briefly characterized and their ex‐post forecasts are compared with the actual development of the region. The final section of the paper compares how the three models respond to a common set of assumptions and policies from the fields of land‐use control, traffic management and transport investment. The differences in model response give insights into the validity of the theoretical foundations and internal structure of the models.     

Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.