BRT专用车道站台段钢桥面铺装的一种解决方案

BRT专用车道的定点停车位作为铺装的薄弱点,若铺装层的高温动稳定性不足将造成该处形成剪切推移、车辙等病害。以贵阳市中环路为背景,对BRT专用车道站台段钢桥面铺装的四个方案进行比选,并选取热拌式沥青混凝土作为实施方案,经验证效果良好,可为国内外的类似工程提供参考。     

交通建设项目资金监管模式探讨

文章通过对交通建设项目资金的特点分析,提出实施资金集中监管核算模式,实现对项目建设资金的全方位、全过程监控,盘活存量资金,提高建设资金的使用效率和效益,节约建设成本。     

低应变动测技术在粉喷桩桩身检测中的应用

反射波法低应变动测技术是测定混凝土桩身完整性的一种成熟、经济快捷的无破损检测方法.文章在可行性分析的基础上,提出将反射波法低应变动测技术应用于粉喷桩桩身质量的检测中,并结合宁夏中宁至营盘水高速公路工程的应用实践,对粉喷桩低应变动测适合的激振方式、检测龄期进行了分析.最后,通过整桩钻芯试验,验证了低应变动测结果的准确性.     

超深三轴搅拌桩止水帷幕关键技术在深基坑中的应用

结合上海轨道交通10号线一期工程110 kV溧阳路主变电所的施工实践,介绍了一种全新的通过以三轴搅拌桩作为止水帷幕,垂直隔断微承压水的方法,妥善解决了城市深基坑施工所面临的抽水降压对周边环境影响的问题。     

广西洛维大桥主桥箱梁加固设计方案

文章以广西洛维大桥为研究对象,介绍了该桥主桥箱梁存在的主要病害,分析了病害产生的原因,提出了针对性的加固方案,并通过结构验算验证了方案的可行性,为今后类似桥梁的加固改造施工提供技术参考。     

高真空击密法在吹填土地基处治中的应用

文章针对钦州保税港吹填土地基施工区域的工程地质情况,提出了高真空击密地基处治方法,阐述了该方法的基本原理,并通过试验段相关试验检测,探讨了该方法的加固处治效果。     

秦岭天台山大断面高速公路隧道降尘除尘方案研究

为解决由于隧道施工断面大、在开挖过程中产生的粉尘难以通过施工通风排除的问题,对秦岭天台山隧道（双向6车道）施工过程中钻孔、爆破、出渣、喷浆等不同工况下的隧道粉尘质量浓度进行现场实测,并根据现场实测结果,对隧道内各工况施工粉尘分布特性进行数值模拟研究,提出适合于大断面隧道施工的粉尘控制措施。现场测试结果表明,出渣和喷浆工况下,粉尘质量浓度超过规范要求数倍。通过数值模拟得到： 1）靠近掌子面40 m区域内粉尘质量浓度不稳定,下降趋势不明显; 2）在布置风管时,风管末段至掌子面距离建议取为60~80 m,以保证新鲜风以较大的喷射面抵达掌子面; 3）建议采用附壁风筒降尘+车载除尘方案,除尘效率达95%,能有效处理隧道各区域粉尘,且对施工造成的影响小。     

圭嘎拉高海拔隧道施工人员体力劳动强度评价

为探究圭嘎拉高海拔隧道施工人员体力劳动强度水平,评价施工工序劳动强度,选择圭嘎拉隧道进口段（海拔4 300 m）及1#斜井段（海拔4 560 m）的施工人员作为测试对象,分别测量不同工序下施工人员的生理指标（心率、血氧饱和度、耗氧量）。基于耗氧量计算能量代谢率,进而计算各工序的劳动强度指数。结果表明： 1）260 m的海拔高差造成的施工综合劳动强度指数差异具有统计学意义（P<0.05）; 2）二次衬砌钢筋绑扎是所测施工工序中劳动强度最大的工序,该工序下施工人员的心率、血氧饱和度和平均能量代谢率都出现超过卫生限值的情况,劳动强度指数达到35（极重）; 3）海拔为4 300~4 560 m时,隧道各施工工序劳动强度大部分为中度-极重度。     

Mechanism of Tunnel Water Inflow Caused by Bending Failure of a Waterproof Dike Based on a Circular Thin Plate Mechanical Model北大核心CSCD

Water bursts during tunnel construction endanger construction, and it is therefore necessary to reserve a waterproof dike with the required thickness to avoid water bursts and to take reinforcement of the dike and treatment of the structure liable to trigger a water burst. Using the water burst at K5+398 of the Mingyueshan tunnel of the Shanghai-Chengdu expressway as an example, and considering the type of tunnel section and the upright mudstone of the dike, the waterproof dike at the work face is simplified as a round thin plate. A formula for the calculation of a minimum safety thickness for the critical waterproof dike is deduced by analyzing the force applied on the water-proof dike, and the minimum safety thickness for the water burst section at K5+398 of the Mingyueshan tunnel is cal-culated. The numerical simulation analysis demonstrates the critical thickness of waterproof dike at K5+398 of the Mingyueshan tunnel is 1.4-1.55 m, and the calculated water inflow and water burst basically agree with the actual condition. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.