The impact of port operations on efficient ship operation from both economic and environmental perspectives

Recently, shipping lines have focused on efficient ship operation, which relates to energy efficiency issues in shipping and, particularly, to operational issues such that the minimisation of fuel consumption and resulting greenhouse gas emissions. Efficient ship operation in container lines is closely related to the ship’s time at sea and ship’s time in port. Reduction in port time, thanks to high-quality port operations, allows improvement in the operational efficiency of a liner service by reducing the fuel consumption of a ship at sea and its resulting CO₂ emissions. The main goal of this article is to investigate how time in port affects efficient ship operation in terms of operating costs, CO₂ emissions and externalities. For this, as a methodology, a simulation based upon system dynamics is introduced. Major finding is that less time in port resulting from the improvement of port operations contributes to efficient ship operation in terms of operating costs, amount of CO₂ emissions and external effects in the liner shipping industry. In particular, a sensitivity analysis on efficient ship operation vis-à-vis the quality of port operation shows that bigger ships need to select highly productive calling ports that provide less time in port.     

Vibration path analysis and optimal design of the suspension for brake judder reduction

Brake judder is abnormal vibration, which is mainly generated by uneven contact between the brake disc and pad. The abnormal vibration from BTV (Brake Torque Variation) is transferred to the suspension and the steering system during braking. In this paper, judder simulation is carried out using a multi-body dynamic analysis program to analyze the relationship between judder and the transfer mechanism, which consists of the suspension and the steering system. In order to verify the analytical model, test results are compared with the simulation results. A sensitivity analysis is also carried out. In addition, an optimization method is presented for judder reduction, using the design of experiments.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Highly reliable driving workload analysis using driver electroencephalogram (EEG) activities during driving

Traffic accidents are caused by various factors, which can be classified into human factors, vehicle factors and environmental factors. Recently, human factors have been drawing particular attention as efforts are being made to enhance the safety performance of vehicles and improve road conditions. Driving distraction caused by an increased driving workload is a representative human factor. Various studies in the past have attempted to quantify the driving workload by using EEG activities. However, they have failed to consider vibration properties generated from vehicle engines. A number of noise signals were included in brainwave signal processing, which resulted in a failure to obtain reliable outcomes. Thus, this study suggests driver EEG activities free of vehicle engine secondary vibration in order to develop a method that analyzes the driving workload with high statistical reliability. By using the analytical method developed in this study, standard values of driving workload for straight and left-turn driving that has statistical significance could be calculated. The analytical method for driving workload created by this study can be applied to HVI and road design.     

Ship-berth link performance evaluation: simulation and analytical approaches

In this paper we consider the performance evaluation of ship-berth link in port. The efficiency of operations and processes on the ship-berth link has been analysed through the basic operating parameters such as berth utilization, average number of ships in waiting line, average time that a ship spends in waiting line, average service time of a ship, average total time that a ship spends in port, average quay crane (QC) productivity and average number of QCs per ship. All the main performances of the ship-berth link are given. This is one of the problems faced by planners and terminal operators in ports. In this paper, we propose two models based on simulation and queuing theory, respectively, in order to determine the performance evaluation of ship-berth link in port. Numerical results and computational experiments are reported to evaluate the efficiency of the models for Pusan East Container Terminal (PECT).     

Performance characteristics of a supplementary stack-cooling system for fuel-cell vehicles using a carbon dioxide air-conditioning unit

In fuel-cell-powered vehicles, the fuel-cell system requires a thermal-management subsystem to dissipate heat released during the reaction of hydrogen with oxygen. When the stack generates power at a high rate, a large amount of heat is also generated. If cooling by the radiator is insufficient, a supplementary stack-cooling system is needed to maintain a safe operating temperature. In this study, the performance of a CO₂ air-conditioning unit for stack cooling was investigated under various conditions, and the relationship between cabin cooling and stack cooling was also studied. The coefficient of performance (COP) increased from 1.9 to 2.4, with an increase in cabin-air inlet flow rate from 0 to 8 m³/min. When the air-conditioning unit was turned off, the cooling capacity of the stack cooler was increased; correspondingly, as the cabin-cooling capacity was increased, that of the stack cooler decreased. With an increase in ambient-air inlet temperature from 38°C to 45°C, the COP decreased by 24%. Additionally, both the stack-cooling capacity and cabin-cooling capacity were decreased by about 12% and 16%, respectively, due to reduced heat transfer in the gas cooler as the ambient air inlet temperature was increased. It is expected that the experimental results can serve as a resource in designing a stack-cooling system using a CO₂ air-conditioning unit to enhance stack power generation and efficiency.     

Optimizing the shape of a bumper beam section considering pedestrian protection

This paper presents a design technique to optimize the shape of a vehicle bumper beam that satisfies both the safety requirements for a front rigid-wall impact and the regulations protecting pedestrians from lower leg injuries caused by bumper impacts. An intermediate response surface modeling (IRSM) technique was introduced to approximate the non-linear force-displacement curves obtained from the front impact analysis of a vehicle bumper. The accuracy of the IRSM model was tested by comparing its results with those of the non-linear finite element analysis. The maximum displacement error between the two models did not exceed 3%. Using pedestrian impact analyses based on the experimental arrangement of the Plackett-Burman design, the approximate functions describing the response values acting on the lower legs were calculated. The shape of the bumper beam was optimized by integrating the IRSM with the force-displacement model and the approximate functions on lower leg impact. The optimization results satisfied safety regulations on the maximum allowable displacement of the vehicle bumper, and also the regulations protecting pedestrians from lower leg injuries caused by bumper impacts.     

Effect of various LPG supply systems on exhaust particle emission in spark-ignited combustion engine

The particle size distribution and particle number (PN) concentration emitted by internal combustion engine are a subject of significant environmental concern because of their adverse health effects and environmental impact. This subject has recently attracted the attention of the Particle Measurement Programme (PMP). In 2007, the UN-ECE GRPE PMP proposed a new method to measure particle emissions in the diluted exhaust of automotive engines and a regulation limit (<6.0×10¹¹ #/km, number of particles). The specific PN regulation of spark-ignited combustion engine will be regulated starting on September 1, 2014 (EURO 6). In this study, three types of LPG supply systems (a mixer system and a multi-point injection system with gas-phase or liquid-phase LPG fuel) were used for a comparison of the particulate emission characteristics, including the nano-sized particle number density. Each of the three LPG vehicles with various LPG injection systems contained a multi-cylinder engine with same displacement volumes of 2,000 cm³ and a three-way catalytic converter. The test fuel that was used in this study for the spark-ignited combustion engine was n-butane basis LPG fuel, which is primarily used for taxi vehicles in Korea. The characteristics of nano-particle size distribution and number concentration of particle sizes ranging from 20 to 1,000 nm (aerodynamic diameter) that were emitted from the three LPG vehicles with various LPG supply systems were investigated by using a condensation particle counter (CPC), which is recommended by the PMP under both the NEDC and FTP-75 test modes on a chassis dynamometer. The experimental results indicate that the PN emission characteristics that were obtained by the CPC system using the PMP procedure are sufficiently reliable compared to other regulated emissions. Additionally, the sources of PN emissions in ascending order of magnitude are as follows: mixer type, gas-phase LPG injection (LPGi) and liquid-phase LPG injection (LPLi) passenger vehicles. The liquid-phase LPG injection system produced relatively large particle sizes and number concentrations compared to the gaseous system, regardless of the vehicle driving cycle. This phenomenon can be explained by unburned micro-fuel droplets that were generated due to a relatively short homogeneous fuel-air mixture duration in the engine intake manifold. Also the particle number emissions from the LPG vehicle were influenced by the vehicle driving cycle.     

Analytical study to estimate the performance of the Power Shift Drive (PSD) Axle for a forklift

In this study, a new concept for a power delivery system is developed. Power Shift Drive (PSD) Axle vehicle modeling and dynamic movement analysis are performed via simulation. The dynamic vehicle model is constructed from data obtained from the derived equation, considering the specific characteristics of each part. The model is composed of a torque converter, a gear box, a differential, hub reduction and an engine, which is the power source of the 1st forward and reverse PSD-Axle. By unifying the mathematical equations for each component, a mathematical model of the 1st forward gear is derived. The system dynamic model is created using MATLAB/Simulink based on the mathematical model. Simulation is carried out using Simulink to estimate the dynamic behavior of the PSD-Axle. In addition, the dynamo test result is used to verify the model. Finally, a successful model is created. This study will be used to establish the basic conceptual design for the PSD-Axle multi-gear system.     

Effects of FTP-75 mode vehicle fuel economy improvement due to types of power steering system

This paper focuses on fuel economy improvement according to the type of power steering system. Usually, a conventional power steering system is directly driven by the crankshaft of the engine with a belt, known as HPS (hydraulic power steering). However, there is some inefficiency with this system at high engine speeds. To improve this inefficiency, automobile makers have developed two power steering systems: EHPS (electro-hydraulic power steering) and MDPS (motor-driven power steering) or EPS (electric powered steering). However, there has been insufficient study of effects of the type of power steering system on fuel economy. In this paper, the effect of the type of power steering system on fuel economy is studied experimentally, and calculations of the effect on vehicle fuel economy are presenting using computer simulation with AVL cruise software. The results demonstrate that a 1% vehicle fuel economy improvement can be achieved in a vehicle with an electro-hydraulic power steering system compared to a vehicle with a hydraulic power steering system. In addition, a 1.7% vehicle fuel economy improvement can be achieved using a full electric power steering system in a FTP-75 driving cycle. These results could be used to choose a power steering system.