Time-variant ultimate longitudinal strength of corroded bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This paper uses a set of the time-dependent corrosion wastage models for 23 different member locations/categories of bulk carriers previously developed by the authors, based on the available corrosion measurements for existing large bulk carrier structures. Differences due to the location and corrosion severity of every member type are taken into account. The nominal design corrosion values for the primary members are suggested based on the annualized corrosion rates obtained in the present study. The effect of time-variant corrosion wastage on the ultimate hull girder strength as well as the section moduli is studied. The criteria for repair and maintenance of heavily corroded structural members so as to keep the ultimate longitudinal strength at an acceptable level are discussed. Important insights and conclusions developed are summarized.     

Asymptotic field of mode Ⅱ dynamic growing crack in visco-elastic material

A mechanical model of visco-elastic material is established in order to investigate viscous effect in dynamic growing crack-tip field of mode Ⅱ. It is shown that in stable creep growing phase, elastic deformation and viscous deformation are equally dominant in the near-tip field, the stress and strain have the same singularity, namely, (σε) ∝r^-1/(n-1). The asymptotic solutions of separatied variables of stress, stain and displacement in crack-tip field are obtained by asymptotic analysis, and the results of numerical value of stress and strain in crack-tip field are obtained by shooting method. Through numerical calculation, it is shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M. By the asymptotic analysis to the crack-tip field, the fracture criterion of mode Ⅱ dynamic growing crack of visco-elastic materials is put forward from the point of view of strain.     

Fully secure revocable attribute-based encryption

Distributed information systems require complex access control which depends upon attributes of protected data and access policies. Traditionally, to enforce the access control, a file server is used to store all data and act as a reference to check the user. Apparently, the drawback of this system is that the security is based on the file server and the data are stored in plaintext. Attribute-based encryption (ABE) is introduced first by Sahai and Waters and can enable an access control mechanism over encrypted data by specifying the users’ attributes. According to this mechanism, even though the file server is compromised, we can still keep the security of the data. Besides the access control, user may be deprived of the ability in some situation, for example paying TV. More previous ABE constructions are proven secure in the selective model of security that attacker must announce the target he intends to attack before seeing the public parameters. And few of previous ABE constructions realize revocation of the users’ key. This paper presents an ABE scheme that supports revocation and has full security in adaptive model. We adapt the dual system encryption technique recently introduced by Waters to ABE to realize full security.     

Long-term tracking based on spatio-temporal context

Aiming at the problem that the fast tracking algorithm using spatio-temporal context (STC) will inevitably lead to drift and even lose the target in long-term tracking, a new algorithm based on spatio-temporal context that integrates long-term tracking with detecting is proposed in this paper. We track the target by the fast tracking algorithm, and the cascaded search strategy is introduced to the detecting part to relocate the target if the fast tracking fails. To a large extent, the proposed algorithm effectively improves the accuracy and stability of long-term tracking. Extensive experimental results on benchmark datasets show that the proposed algorithm can accurately track and relocate the target though the target is partially or completely occluded or reappears after being out of the scene.     

Blast loaded plates

Plates form one of the basic elements of structures. Land-based structures may be subjected to air blast loads during combat environment or terrorist attack, while marine structures may be subjected to either air blast by the attack of a missile above the water surface or an underwater explosion by the attack of a torpedo or a mine or a depth charge and an aircraft structure may be subjected to an in-flight attack by on-board explosive devices. Furthermore, gas explosion occurs in offshore installations and industries. This review focuses on the phenomenological evolution of blast damage of plates.     

Efficient clustering and simulated annealing approach for circuit partitioning

Circuit net list bipartitioning using simulated annealing technique has been proposed in the paper. The method converges asymptotically and probabilistically to global optimization. The circuit net list is partitioned into two partitions such that the number of interconnections between the partitions is minimized. The proposed method begins with an innovative clustering technique to obtain a good initial solution. Results obtained show the versatility of the proposed method in solving non polynomial hard problems of circuit net list partitioning and show an improvement over those available in literature.     

Study on bending conditions of plate in coil box

In a coil box between the roughing and finishing stands on a hot strip mill, a problem has been encountered that the entry region of the plate touches the bending rolls and deforms. As a result, the defective coil occurs. The condition of plate bending, which forms a new deformation feature in coiling, is analyzed. In this paper, the authors focus on the research of the effects of coiling parameters, such as the thickness of plate, roll speed and feeding speed of plate in coil box, and on specific plate bending. A finite element method is developed to simulate this coiling process. Based on numerical simulation, the effects of the coiling parameters on the mechanics and deformation of the bending plate are obtained. Numerical simulation tests have verified the validity of the developed model.     

Port e-Transformation,customer satisfaction and competitiveness

ABSTRACT

e-Transformation in container ports means port organization-wide innovative transformation encompassing internal and external value chains based on information and communication technology. There is a considerable theoretical literature on the impact of e-Transformation on business performance, but there is very little empirical study on its effectiveness in ports. The objective of this paper is to empirically investigate how e-Transformation in container port management can influence customer satisfaction and port competitiveness. The findings reveal that e-Transformation in container ports can affect customer satisfaction and port competitiveness through e-Workplace, customer relationship management and security, implying that container ports should make every effort to focus on e-transformation in these critical areas. Due to limited empirical studies in this area, the findings have provided an empirical support for the importance of e-Transformation in container terminal management and shed more light on how e-Transformation can affect customer satisfaction and port competitiveness.     

Comments on enhanced yoking proof protocols for radio frequency identification tags and tag groups

A radio frequency identification (RFID) yoking proof scheme can generate proofs of simultaneous presence of two tags in the range of a specified reader so that an off-line verifier can verify the proofs later. This proof has found several interesting applications. However, many existing RFID yoking schemes are vulnerable to replay attacks. To overcome the weaknesses, Cho et al. proposed a new RFID yoking proof protocol and a new grouping protocol. Unfortunately, Cho et al.’s schemes are still vulnerable to replay attacks. In this paper, in addition to demonstrating weaknesses, we further discuss the rationale behind these weaknesses to provide a guide line for designing secure RFID yoking schemes. Based on the guide line, we propose a new RFID yoking scheme and a new RFID grouping scheme. Performance evaluation shows that our scheme outperforms its counterparts.     

Application of the reverse 3D scanning method to evaluate the wear of forging tools divided on two selected areas

This study is focused on tools used in the industrial hot forging process of a front wheel forging (eventually–gear wheel) manufactured for the automotive industry. Four different variants were applied for the tools: 2 die inserts were coated with two different hybrid layers (GN + PVD type), i.e. AlCrTiN and AlCrTiSiN, one insert was only nitrided, and one was pad welded, to improve tool durability. The tool wear was analysed and represented by the material degradation on the working surface, based on the 3D scanning and the material growth of the periodically collected forgings. Additionally, the scanned tools were divided into two areas, in which it was found, based on the reliminary analysis, that various degradation mechanisms are predominant. Microstructural and hardness measurements of the analyzed tools were also performed. Based on the results, it was found that, in the central part of the die insert (area A), thermo-mechanical fatigue and wear occurred, while in the area of the bridge insert (area B), only abrasive wear could be observed. For these areas (A and B), the loss of material was determined separately. In area A for the inserts with hybrid layer GN+AlCrTiSiN and gas nitrided, an intensive increase of wear took place, which was not observed for the pad welded and GN+AlCrTiN layer insert, for which, together with the increase of the forging number, a proportional growth of the loss of material occurred. In area B the weakest results were obtained for the insert with GN+AlCrTiSiN layer, while wear of other die inserts grew similar and proportional.