隧道检测系统及其在韩国高速铁路隧道的应用

介绍韩国高速铁路隧道安装的健康监测系统,提出基于检测数据诊断隧道衬砌可能破损的新系统识别方法。引入逆算法,即根据已知的形变数据和混凝土衬砌恒载,估计破损的程度和位置。对以刚度均减和裂缝概念为基础建立的两种模型进行效果和优劣比较。对理想化的隧道结构进行数学分析,并用检测数据中常用的白噪声对模型进行适应性研究。结果表明,基于刚度均减方法的模型1对白噪声相对不敏感,而以裂缝概念为基础的模型2由于受刚度减小的影响很小,易于现场应用。     

The place of the ISPS Code in the legal international regime

The adoption of the International Ship and Port Facility Security Code (ISPS Code) is the latest response of the international shipping community to the increasing threat posed by acts of terrorism at sea. The ACHILLE LAURO incident of 1985 showed that the traditional law against piracy was not adequate to deal with new types of unlawful acts against international shipping, especially those involving acts of terrorism. The 1988 Convention for the Suppression of Unlawful Acts against the Safety of Maritime Navigation (SUA Convention) and the technical and administrative measures adopted by the Maritime Safety Committee of IMO in 1986 and 1996 attempted to develop a broader regime to deal with unlawful acts against international shipping.However, the events of September 11, 2001 showed that additional measures were still needed to prevent terrorist attacks against ships.     

From privilege to peril

This article addresses the growing concern over the diminishing legal rights and increasing responsibilities of those in command of ships today. A number of high-profile maritime accidents have focussed on the dilemma faced by shipmasters who appear to be held responsible for actions over which they have little or no control. This seems to indicate that the traditional privilege and honour associated with command appears to have become a risky burden. The article discusses the legal rights and responsibilities that shipmasters have today in terms of international maritime law and policy. Four case studies are utilized to illustrate the problem.     

Fault Diagnosing System of Steam Generator for Nuclear Power Plant Based on Fuzzy Neural Networks

All kinds of reasons are analysed in theory and a fault repository combined with local expert experiences is establishedaccording to the structure and the operation characteristic of steam generator in this paper. At the same time, Kohonen algo-rithm is used for fault diagnoses system based on fuzzy neural networks. Fuzzy arithmetic is inducted into neural networks tosolve uncertain diagnosis induced by uncertain knowledge. According to its self-association in the course of default diagnosis. thesystem is provided with non-supervise, self-organizing, self-learning, and has strong cluster ability and fast cluster velocity.     

3-D computational method of wave loads on turret moored FPSO tankers

A three-dimensional method of calculating wave loads of turret moored FPSO (Floating Production Storage and Offloading) tankers is presented. The linearized restoring forces acting on the ship hull by the mooring system are calculated according to the catenary theory, which are expressed as the function of linear stiffness coefficients and the displacements of the upper ends of mooring chains. The hydrodynamic coefficients of the ship are calculated by the three-dimensional potential flow theory of the linear hydrodynamic problem for ships with a low forward speed. The equations of ship motions are established with the effect of the restoring forces from the mooring system included as linear stiffness coefficients. The equations of motions are solved in frequency domain, and the responses of wave-induced motions and loads on the ship can be obtained. A computer program based on this method has been developed, and some calculation examples are illustrated. Analysis results show that the method can give satisfying prediction of wave loads.     

The effect of plastic constraint on the initiation of ductile tears in shipbuilding structural steels

In this paper, the effect of plastic constraint on the initiation of ductile tears in four different shipbuilding structural steels has been experimentally studied by measuring the J-integral and crack opening displacement COD at initiation in three-point bend specimens with deep and shallow notches. Experimental results of seven groups of different strength alloy steels show that both Si and Ji values of ductile tear from the shallow crack specimens which have less constraint flow field are significantly higher than those of deeply notched specimens. Slip-line-field analysis shows that, for shallow crack, the hydrostatic stress is lower than that from standard deeply cracked bend specimen, which develops a high level of crack tip constraint, provides a lower bound estimate of toughness, and will ensure an unduly conservative approach when applied to structural defects, especially if initiation values of COD and J-integral are used.     

Simulation System Design of 3-D Panorama of Ship Motions in Wave

In this paper a 3-D panoramic simulation system of a ship is described which is developed with the MAXSCRTPT language and VC + + as programming tools on the platform of 3 Dsmax. The strip theory method is applied to the motion prediction of the mono-hull. The time history solutions of heave and pitch are obtained in the condition of head sea to provide the primary data on panoramic simulation. The simulation system has following functions: 1) digital simulation; 2 ) panoramic simulation; 3) environmental set-up; 4) render preview and output.     

Potential and benefits of AIS to Ships and Maritime Administrations

The Universal Automatic Identification System (AIS) provides a huge variety of potential applications and services which exceed the well known ship-to-ship data exchange. The purpose of this paper is to address the most important AIS services, in particular the AIS position report and the AIS safety-related and binary messages (“AIS telegrams”). The main issue is the impact of this new technology on the on-board use of AIS in collision avoidance (and its limitations) as well as the impact on shore-based services such as Vessel Traffic Service (VTS), port management and the need of an effective AIS network.     

Accessing the global seafaring labour market

As a global labour market exists for international shipping, a challenging issue facing this industry is to get access to reliable, accurate and timely information of seafarers’ demand and supply. Related to the deregulation environment and great variety in the availability and quality of relevant information, an enquiry into the global seafaring labour market is more complex than a national labour force survey. To cope with the challenge, a novel approach has been developed by the Seafarers International Research Centre (SIRC) at Cardiff University. Viewing capital (ship), labour (seafarers) and services (cargo or passengers) as interconnected and interwoven to each other, it collects and analyses crew lists from main ports world-wide, resulting in the creation of the first global seafarers database. The purpose of this paper is explain its methodological principles, and to illustrate its application potential. Taking the cruise sector as an example, research findings and methodological implications are highlighted.