Chaotic synchronization based on nonlinear state-observer and its application in secure communication

Chaotic synchronization is a branch of chaotic control. Nowadays, the research and application of chaotic synchronization have become a hot topic and one of the development directions is for the research on chaos. In this paper, a universal nonlinear stateobserver is presented for a class of universal chaotic systems to realize the chaotic synchronization, according to the theory of state-observer in the modem control theory. And theoretic analysis and simulation results have illustrated the validity of the approach. Moreover, the approach of synchronization proposed in this paper is very easy, flexible and universal with high synchronization precision. When the approach is applied to secure communication, the results are satisfying.     

Hydrodynamic interactions between two bodies in waves in 3D time domain

In this paper, a 3D time domain technique is adopted to calculate the coupled hydrodynamic interaction between two bodies without flare in waves. For verifying the code, two same cylinders are selected to calculate coupled hydrodynamic effects by comparison with the results obtained by 3D frequency method which has been proved to be efficient for solving such problems. In order to improve efficiency of calculation, the effect of history time has been discussed, and an improved method is presented. Moreover, the effect of lateral separation distance is also discussed in detail. The technique developed here may serve as a more rigorous tool to analyze the related transient problems of two ships doing underway replenishment in waves.     

Practically applicable devices for blocking the gap flow of a horn rudder to reduce rudder cavitation and their verification through numerical simulations

Rudder cavitation causes serious damage to the rudder and affects the safety and cost-effectiveness of a ship. In recent applications, a semicircular prismatic bar protruding beyond the concave surface of the horn facing the gap, located along the center-plane of the rudder, has been used to lessen the gap flow between the horn and the movable portion of the rudder system. Previous numerical studies with this single bar indicate that it can noticeably reduce rudder cavitation. In the present study, a pair of bars for blocking the vertical gaps, which are attached symmetrically to the center-plane on opposite convex surfaces of the movable portion, is suggested for circumventing the difficulties that arise in the practical application of single centre bars. Placed near the outer edges of the gap, the bars are are easily accessible at the maximum rudder angle to allow simple installation during routine ship maintenance. An additional blocking disk is inserted on top of the pintle block, blocking the horizontal gaps. Three-dimensional computations are conducted with these combined devices and the results show that the devices are remarkably efficacious in reducing rudder gap cavitation.     

Heuristics for the identical machine scheduling problem with preventive maintenances

In this paper, two mixed integer programming models integrating production scheduling and preventive maintenances are proposed to derive the optimal solutions for the identical machine scheduling problem with unavailability constraints. In the first model, the maintenance activities are performed periodically and the objective is to minimize the makespan. In the second model, the maintenance activities are flexible and the machines’ continuous working time cannot exceed a maximum allowed time T; the objective is to minimize the total completion time of jobs. For the first problem, we propose a heuristic longest batch time (LBT) and prove that the worst case error bound of LBT is 2. For the second problem, we develop a heuristic modified smallest processing time (MSPT) based on some properties of the optimal solutions. Computational experiments show that both of the heuristics are effective and efficient compared with the results obtained by CPLEX and the other algorithms.     

Hardware architecture design of block-matching and 3D-filtering denoising algorithm

Block-matching and 3D-filtering(BM3D) is a state of the art denoising algorithm for image/video,which takes full advantages of the spatial correlation and the temporal correlation of the video. The algorithm performance comes at the price of more similar blocks finding and filtering which bring high computation and memory access. Area, memory bandwidth and computation are the major bottlenecks to design a feasible architecture because of large frame size and search range. In this paper, we introduce a novel structure to increase data reuse rate and reduce the internal static-random-access-memory(SRAM) memory. Our target is to design a phase alternating line(PAL) or real-time processing chip of BM3 D. We propose an application specific integrated circuit(ASIC) architecture of BM3 D for a 720 × 576 BT656 PAL format. The feature of the chip is with 100 MHz system frequency and a 166-MHz 32-bit double data rate(DDR). When noise is σ = 25, we successfully realize real-time denoising and achieve about 10 d B peak signal to noise ratio(PSNR) advance just by one iteration of the BM3 D algorithm.     

Study on Oxidation Activity of CuCeZrO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> Doped with K for Diesel Engine Particles in NO/O<Subscript>2</Subscript>

CuCeZrO_x and KCuCeZrO_x catalysts were synthesized and coated on the blank diesel particulate filter (DPF) substrate and a particulate matter (PM) loading apparatus was used for soot loading. The catalytic performances of soot oxidation were evaluated by temperature programmed combustion (TPC) test and characterization tests were conducted to investigate the physicochemical properties of the catalysts. The reaction mechanism in the oxidation process was analyzed with diffuse reflectance infrared Fourier transform spectroscopy. The results demonstrated that CuCeZrO_x catalyst exhibited high activities of soot oxidation at low temperature and the best results have been attained with Cu_0.9Ce_0.05Zr_0.05O_x over which the maximum soot oxidation rate decreased to 410 °C. Characterization tests have shown that catalysts containing 90% Cu have uniformly distributed grains and small particle sizes, which provide excellent oxidation activity by providing more active sites and forming a good bond between the catalyst and the soot. The low-temperature oxidation activity of soot could be further optimized due to the excellent elevated NO’s conversion rate by partially substituting Cu with K. The maximum particle oxidation rate can be easily realized at such a low temperature as 347°C.     

Design and validation of an electro-hydraulic brake system using hardware-in-the-loop real-time simulation

This paper presents a novel electric booster (E-booster) that exibits superior performance advantages over traditional vacuum boosters. The proposed E-booster, consisting of an electric motor and a ball screw assembly, is designed for electro-hydraulic brake (EHB) systems to meet relevant requirements for electric vehicles and active safety technologies. A mathematical model for an EHB system is generated to determine the desired values of the parameters for the E-booster prototype using numerical simulation in MATLAB. Simulation results of the EHB system with the virtual E-booster demonstrate the feasibility and effectiveness of the innovative technique. Built upon the results derived from the numerical simualtions, an integrated algorithm based on the Kalman filter and a sliding mode control technique is designed to control the E-booster motor and to implement the brake booster function. A hardware-in-the-loop (HIL) real-time simulation system equipped with the E-booster prototype is developed. HIL real-time simulations are conducted to evaluate the proposed algorithm. The HIL real-time simulation results demonstrate that the proposed algorithm generates booster brake forces fast, and forces the ball nut to track the push rod well to ensure comfortable brake pedal feel.     

Cyclist target and test setup for evaluation of cyclist-autonomous emergency braking

From 2018, Autonomous Emergency Braking (AEB) systems dedicated to avoid or mitigate passenger car-tocyclist collisions will be considered in the safety assessment by Euro NCAP. To test such systems, appropriate equipment has been developed in a project called CATS “Cyclist-AEB Testing System”, that has run between April 2014 and August 2016. Moreover, a proposal for the most relevant test scenarios was set up. The objective of the project was to provide proof to Euro NCAP of the relevance of the proposed test scenarios and of the feasibility of practical implementation of the scenarios and test setup. The process regarding the selection, verification and validation of test scenarios is described. The cooperation between 17 industrial partners (car manufacturers and automotive suppliers) in the CATS project has stimulated the harmonization and acceptance of the protocol, target and test setup. The process and intermediate results including the used methodology, have been reviewed by the German Federal Highway Research Institute (BASt) and have been shared on a regular basis during the project with stakeholders in Europe, Japan and the USA. Euro NCAP already indicated to consider the results of the CATS project as the main input to draft the test protocol, including scenarios and target for Cyclist-AEB systems in 2018 and 2020.     

MPC-BASED steering control for backward-driving vehicle using stereo vision

We propose a steering control algorithm for autonomous backward driving in a narrow corridor. Passable spaces are detected using a stereo camera, and the steering angle is controlled by a model predictive controller (MPC). For passable space detection, an UV-disparity map is calculated from the original disparity map. Information regarding passable spaces collected by the stereo camera is used in steering control. Backward driving requires the driver’s preemptive actions, which can be learned by experience because of the non-intuitive responses (the initial motion of the vehicle is opposite to the driver’s steering angle input). This occurs because a backward-driving vehicle is a non-minimum phase system. One of the most popular steering control algorithms is Stanley method, which is based on the feedback of lateral displacement error and heading angle error. The method is very intuitive and works well for forward driving, but it exhibits significant undershoot for backward driving cases. Furthermore, the method does not explicitly consider any constraints on control inputs and states. We designed a steering controller based on the MPC technique that requires future information but can handle constraints explicitly. Because we have near-future information from the stereo camera under limited passable spaces, MPC can be effectively implemented. We performed several simulations and experiments to show the performance and superiority of the suggested method over a simple feedback-based control algorithm.     

Application of data fusion method to fault diagnosis of nuclear power plant

The work condition of nuclear power plant (NPP) is very bad, which makes it has faults easily. In order to diagnose the faults real time, the fusion diagnosis system is built. The data fusion fault diagnosis system adopts data fusion method and divides the fault diagnosis into three levels, which are data fusion level, feature level and decision level. The feature level uses three parallel neural networks whose structures are the same. The purpose of using neural networks is mainly to get basic probability assignment (BPA) of D-S evidence theory, and the neural networks in feature level are used for local diagnosis, D-S evidence theory is adopted to integrate the local diagnosis results in decision level. The reactor coolant system is the study object and we choose 2# steam generator Utubes break of the reactor coolant system as a diagnostic example, The experiments prove that the fusion diagnosis system can satisfy the fault diagnosis requirement of complicated system, and verify that the fusion fault diagnosis system can realize the fault diagnosis of NPP on line timely.