Hydro-elastic analysis and optimization of a composite marine propeller

The present paper addresses the design and optimization of a flexible composite marine propeller. The aim is to tailor the laminate to control the deformed shape of the blade and consequently the developed thrust. The development of a hydro-elastic model is presented, and the laminate lay-up which minimizes the fuel consumption for the cruising and maximum speed conditions is simultaneously determined. Results show a reduction of 1.25% in fuel consumption for the combined case corresponding to a decrease of 4.7% in the cruising speed condition. Finally, the strength of the optimal blade is analyzed using the Tsai-Wu strength index. After local tailoring of the laminate configuration throughout the propeller a maximum value of 0.7 is determined indicating no failure will occur under normal operation conditions. The results suggest that it is possible to design a medium-sized flexible composite marine propeller that will enable a reduction of the fuel consumption while withstanding the imposed loads     

Telemetric system for monitoring and automation of railroad networks

This paper describes a new method of real-time train monitoring based on the ZigBee/IEEE 802.15.4 protocol. The system consists of a mobile device embedded in the moving train which transmits parameter signals that are being measured by a base unit with the help of routers. When applied, the technique monitors and controls vehicles operating on permanent routes, making a real-time evaluation of their performance and location, and allowing an effective planning of trains. It consists of a low cost, low power consumption and safe modular technology capable of monitoring many different variables simultaneously.     

What determines university student’s willingness to pay for bikeways?

Transportation - Inadequate infrastructure is recognized as an important barrier to cycling; therefore, improvements in the provision of bicycle facilities, such as bikeways, are frequently...     

Book Review: Airline Marketing and Management

Abstract

Public transport policy in the Madrid Metropolitan Area is often deemed as a success. In 1985, an important reform was carried out in order to create a new administrative authority to coordinate all public transport modes and establish a single fare for all of them. This reform prompted a huge growth in public transport usage, even though it reduced the funding coverage ratio of the transport system. Since then, Madrid’s public transport system has been undergoing an increasing level of subsidization, which might jeopardize the financial viability of the city public transport system in the future. In this paper, we present a detailed analysis of the evolution of the public transport funding policy in Madrid in recent years. We found that the increasing level of subsidy can hardly be explained on the basis of equity issues. Moreover, we claim that there is still room for a funding policy that makes the efficiency of the system compatible with its financial sustainability.     

Transition between Signal Timing Plans: A Methodological and Analytical Overview

Abstract

The transition phase is generally defined as the process of switching from one timing plan to another; this process may include changes in offset, phase split or cycle length until coordination for a new timing plan is reached once again. As noted in the literature, transition phases between timing plans may lead to severe disruptions of traffic flow, resulting in potentially lasting effects. The aim of this paper is to comprehensively review, classify and analyse the literature regarding transition between different timing plans to highlight existing research gaps and give researchers a starting point to continue contributing with solutions to the transition problem. Regarding transition approaches, a gap concerning mathematical approaches was deemed significant as a transition could be greatly benefited by simultaneously optimising more than one operational measure of effectiveness through multi-objective mathematical models. Moreover, in the analysis of applied approaches, Shortway algorithms generally outperformed other practical methods under different scenarios.     

On-road emissions from urban buses with SCR + Urea and EGR + DPF systems using diesel and biodiesel

Due to growing concerns about NO_x and particulate matter (PM) emissions from diesel engines, stricter regulations are being introduced requiring advanced emission control technology. In response the diesel industry has begun testing various emission control technologies and applying them. To assess vehicle renewal policies of bus companies, two exhaust after-treatment technologies are compared: the combination of a diesel particulate filter and an exhaust gas re-circulation system and the combination of a selective catalytic reduction and urea. On-board emission measurements were conducted under real-world driving conditions on a specific bus route in the city of Madrid.     

An optimization model for bus fleet replacement with budgetary and environmental constraints

ABSTRACT

As maintenance and operation costs increase with usage over time, equipment is replaced when the value of new equipment is more attractive. Some methods have been developed to solve this problem. In the public transport sector, such problems are frequently analyzed by fleet managers and determined by bus age restriction regulations. We propose an Integer Programming model that integrates both budgetary and environmental constraints (CO₂ emissions) which, as far as we know, have not previously been studied in conjunction. The study aims to determine the optimal replacement plan for a fleet of diesel buses of different size, age, maintenance costs and emissions rates, with new (less polluting) diesel buses over a time horizon of 50 years. The results indicate that it is possible to reduce emissions with a low annual budget using an optimal replacement policy.     

Assessment of work-related risk criteria onboard a ship as an aid to designing its onboard environment

The environment onboard a ship presents a typical example of a severe environment, displaying extreme conditions of temperature and relative humidity, especially in the engine room. Datasheets, the international labour organization, and standards do not provide clear information about the suitable ambience of the engine room, its design conditions, and the role of marine engineers in preventing work-related risk. In this study, air temperature and relative humidity were monitored at several locations onboard a merchant ship. These real monitored data were then compared with the ISO design indications to obtain an effective work risk analysis. From these indoor temperature and relative humidity data, the corresponding parameters of thermal comfort in the engine control room and the heat stress and sweating index of a worker in the engine room were determined. As a function of these indices, the maximum time that a worker can stay in the engine room and the time for which he must rest in the control room were also calculated in the present study. Some design corrections are also proposed herein to improve these environments.     

Constrained nested logit model: formulation and estimation

A model of traveller behaviour should recognise the exogenous and endogenous factors that limit the choice set of users. These factors impose constraints on the decision maker, which constraints may be considered implicitly, as soft constraints imposing thresholds on the perception of changes in attribute values, or explicitly as hard constraints. The purpose of this paper is twofold: (1) To present a constrained nested logit-type choice model to cope with hard constraints. This model is derived from the entropy-maximizing framework. (2) To describe a general framework to deal with (dynamic) non-linear utilities. This approach is based on Reproducing Kernel Hilbert Spaces. The resulting model allows the dynamic aspect and the constraints on the choice process to be represented simultaneously. A novel estimation procedure is introduced in which the utilities are viewed as the parameters of the proposed model instead of attribute weights as in the classical linear models. A discussion on over-specification of the proposed model is presented. This model is applied to a synthetic test problem and to a railway service choice problem in which users choose a service depending on the timetable, ticket price, travel time and seat availability (which imposes capacity constraints). Results show (1) the relevance of incorporating constraints into the choice models, (2) that the constrained models appear to be a better fit than the counterpart unconstrained choice models; and (3) the viability of the approach, in a real case study of railway services on the Madrid–Seville corridor (Spain).     

The university workers’ willingness to pay for commuting

Using a dynamic approach, employing data on job mobility, we demonstrate that university workers?? marginal willingness to pay for reducing commuting distance is about ?0.25 per kilometre travelled. This corresponds to a marginal willingness to pay for reducing commuting time of about 75?% of the net average hourly wage. For females, the willingness to pay is substantially higher than for males. It is also substantially higher for workers that work few hours per day, as predicted by theory.