"卫星"号电动车组

介绍了俄罗斯“卫星”号电动车组的设计方案、技术特点以及所采用的设备     

Ride Vibration Measurements of Agricultural Tractor and Trailer Combinations

Tractor ride vibration levels have been measured when operating with and without a two wheel (2W) unbalanced and a four wheel (4W) balanced trailer. Measurements were made in the vertical, pitch, longitudinal and roll directions with the trailers unladen and laden over four typical farm surfaces

The results showed that tractor ride vibration levels were usually increased in all directions-particularly the longitudinal direction- when operating with the laden trailers. But for the unladen trailers, they were increased only in the longitudinal direction. Predominant tractor frequencies tended to be lower with the trailers attached, and coupling between the tractor longitudinal, vertical, roll and pitch co-ordinates was generally increased

Comparisons of the results with the trends predicted by a simplified theoretical model of a tractor and 2W trailer, suggested that the model should be extended to include, (a) the roll direction, (b) more realistic ground inputs, and (c) a 4W trailer     

An Investigation into Stick-Slip Vibrations on Vehicle/Track Systems

A model for the numerical simulation of vehicle/track interaction and stick-slip vibration is presented. A finite element model is developed to calculate vertical contact forces. These forces are then coupled through the contact patch into a non-linear time-domain model by which the stick-slip vibration behaviour of a wheel-rail system is analysed. The investigation suggests that stick-slip vibration may occur if a vehicle which has a maligned or an initial 'wind-up' wheeiset meets a vertical irregularity or contaminants on the track.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.     

Dynamic stochastic transit assignment with explicit seat allocation model

This paper proposes a stochastic dynamic transit assignment model with an explicit seat allocation process. The model is applicable to a general transit network. A seat allocation model is proposed to estimate the probability of a passenger waiting at a station or on-board to get a seat. The explicit seating model allows a better differentiation of in-vehicle discomfort experienced by sitting and standing passengers. The paper proposes simulation procedures for calculating the sitting probability of each type of passengers. A heuristic solution algorithm for finding an equilibrium solution of the proposed model is developed and tested. The numerical tests show significant influences of the seat allocation model on equilibrium departure time and route choices of passengers. The proposed model is also applied to evaluate the effects of an advanced public transport information system (APTIS) on travellers’ decision-making.     

Time domain modeling and simulation of warship flooding process based on counter-flooding activities北大核心CSCD

[目的]实战损伤条件下,舰艇进水是舱室进水漫延与舰员抗沉行为相对抗的过程。现有的不沉性理论无法客观、全面评估抗沉干预对战损舰艇进水过程的影响,缺少从全时域的角度对战损舰艇进水过程开展预测的手段。[方法]首先,分析抗沉干预下舰艇破损进水的耦合关系,构建进水过程时域模型,进而给出数值求解算法;其次,结合案例分析抗沉干预要素对不沉性的影响,并开发可视化、交互式的仿真系统。[结果]通过仿真系统实现了进水过程与多种抗沉干预方式的综合评估,是对现有不沉性理论的有效补充。[结论]该成果不仅可帮助设计人员掌握抗沉设计方案对干预进水过程的有效性,指导舰艇抗沉能力的设计;还可应用于抗沉指挥决策的态势预报,具有较高的军事应用价值。     

A methodological approach for environmental characterization of ports

This paper introduces a methodology for the characterization of ports, employing specifically defined eco-efficiency indicators and combining typically available data (handled cargo, containers and passengers) with ship exhaust pollutants values (mainly NO_x, SO_x and PM) and anticipated external costs (ECs) due to emitted air pollutants to provide a collective overview of all port-related economic and environmental activities. The results from an applied case study allow a comparative evaluation of 16 selected ports based on 17 different evaluation criteria and denote that the employment of such an overall approach can allow port authorities to improve managerial aspects, potentially lower operational costs and promote reduced environmental effects.     

Real-time Monitoring of Subsea Gas Pipelines,Offshore Platforms,and Ship Inspection Scores Using an Automatic Identification System

The aim of this research is to develop an algorithm and application that can perform real-time monitoring of the safety operation of offshore platforms and subsea gas pipelines as well as determine the need for ship inspection using data obtained from automatic identification system (AIS). The research also focuses on the integration of shipping database, AIS data, and others to develop a prototype for designing a real-time monitoring system of offshore platforms and pipelines. A simple concept is used in the development of this prototype, which is achieved by using an overlaying map that outlines the coordinates of the offshore platform and subsea gas pipeline with the ship’s coordinates (longitude/latitude) as detected by AIS. Using such information, we can then build an early warning system (EWS) relayed through short message service (SMS), email, or other means when the ship enters the restricted and exclusion zone of platforms and pipelines. The ship inspection system is developed by combining several attributes. Then, decision analysis software is employed to prioritize the vessel’s four attributes, including ship age, ship type, classification, and flag state. Results show that the EWS can increase the safety level of offshore platforms and pipelines, as well as the efficient use of patrol boats in monitoring the safety of the facilities. Meanwhile, ship inspection enables the port to prioritize the ship to be inspected in accordance with the priority ranking inspection score.     

Particle flux, and composition of sedimenting matter, in the Greenland Sea

Vertical flux of particulate material was recorded with moored sediment traps during 1988/1989 in the Greenland Sea at 72°N, 10°W. This region exhibits pronounced seasonal variability in ice cover. Annual fluxes at 500 m water depth were 22. 79, 8.55, 2.39, 3.81 and 0.51 g m⁻² for total flux (dry weight), carbonate particulate biogenic silicate, particulate organic carbon and nitrogen, respectively. Fluxes increased in April, maximum rates of all compounds occurred in May–June, and consistently high total flux rates of around 100 mg m⁻²d⁻¹ prevailed the summer. The increasing flux of biogenic particles measured in April is indicative of an early onset of algal growth in spring. Small pennate diatoms dominated in the trap collections during April, and were still numerous during the high flux period when Thalassiosira species were the most abundant diatoms. During May–June, up to 22% of the Thalassiosira cells collected were viable-looking cells. The faecal pellet flux increased after the May–June event. Therefore we conclude that the diatoms settled as phytodetritus, most likely in rapidly sinking aggregates. From seasonal nutrient profiles it is concluded that diatoms contribute 25% to new production during spring and 50% on an annual basis. More than 50% of newly produced silicate particles are dissolved above the 500 m horizon. High new production during spring does not lead to a pronounced sedimentation pulse of organic matter during spring but elevated vertical export is observed during the entire growth period.     

High Speed Stability for Rail Vehicles Considering Varying Conicity and Creep Coefficients

The critical or hunting speed of solid axle rail vehicles is known to be a strong function of primary suspension stiffness, wheel/rail profile geometry (conicity and gravitational stiffness), wheel/rail friction forces (creep coefficients), bogie/carbody inertia properties, and secondary suspension design. This paper deals with the problem of maximizing the critical speed through design of the primary and secondary suspension but with control only over the range of wheel/rail geometry and friction characteristics. For example, the conicity may varie from .05 to .3 and the linear creep coefficients from 25% to 100% of the predicted Kalker values.

It is shown that the maximum critical speed is greatly limited by the wheel/rail geometry and friction variations. It is also shown that, when lateral curving and ride quality are considered, the best design approach is to select an intermediate primary longitudinal stiffness, to limit the lowest value of conicity (e.g. to .1 or .2) by wheel profile redesign, increasing the secondary yaw damping value (yaw relaxation) and optimizing the primary and secondary lateral stiffness.