评柯胡《社会、贸易及组织:3世纪至13世纪的闽南》

泉州位于福建沿海,是中国宋元时期著名的港口城市之一,在中国与其他国家发展贸易、文化及外交往来中发挥了重要的作用.目前,有关泉州的各种语言的文献记载和研究,数量还是相当多的,然而,将其置于一个较大的区域性框架下进行考察的研究还比较少见.在本人尚未出版的完成于1982年的博士论文中,就曾作过这方面的尝试.我在自己的论文中,不仅把泉州视作一个繁荣的海港,更把它看作是泉州、漳州、兴化三府区域的中心.[2]柯胡的大著无疑是第一部从此视角来研究泉州的英语学术著作.书中涉及的区域包括福建的南部沿海地区,明清时期多称之为闽南,但作者称之为泉南.     

Improved modeling of park‐and‐ride transfer time: Capturing the within‐day dynamics

An important factor that affects park‐and‐ride demand is transfer time. However, conventional park‐and‐ride demand models treat transfer time as a single value, without considering the time‐of‐day effect. Since early comers usually occupy spots closer to the entrance, their transfer times are shorter. Hence, there is a relationship between arrival time and transfer time. To analyze this relationship, a micro‐simulation model is developed. The model simulates the queuing system at the entrance and the pattern that parking spots are occupied in the parking lot over time. As expected, the model output illustrates an increasing relationship between arrival time and transfer time. This relationship has significant implication in mode choice models because it means that the attractiveness of park‐and‐ride depends on the time of arrival at the park‐and‐ride lot. This model of park‐and‐ride transfer time can potentially improve travel demand forecasting, as well as facilitate the operation and design of park‐and‐ride facilities.     

Passenger route guidance system for multi‐modal transit networks

In many public transport oriented cities in the world, especially Asian cities, the public transport system has been developed extensively, to the extent that it has become increasingly difficult to navigate. Although inter‐modal transfers are common and often necessary, a complete set of the routes across transport modes is generally not presented in a form that is accessible to travelers, as each operator would only publish its own routes. Moreover, the common nonlinear fare tables together with inter‐modal fare discounts pose challenges to travelers in deciding their best routes. This study develops a multi‐modal passenger route guidance system, called eFinder, to aid travelers with their combined mode‐route choices. We discuss the architecture and features of this system in this study. This system forms a platform for disseminating public transit information and should complement further development and use of the public transport network by enabling travelers to make informed choices.     

单个逆变器驱动两台并联感应电机的无速度传感器矢量控制方法

介绍在单个逆变器驱动两台定子绕组并联的感应电机时,对各转子产生的转矩采取无速度传感器矢量控制的方法.该方法采用自适应转子磁通观测器取代磁通传感器,磁通观测器中增加转子速度自适应测定来取代速度传感器.试验结果表明,在每台感应电机不同的额定条件下,该方法是实用的.     

History of Stability of Railway and Road Vehicles

Stability of running of vehicles is one of the important design criteria of railway and road vehicles. Railway vehicle stability is based on kinematics as well as contact mechanics. It reaches back to the 19th century and had its first hey-day with the work of Carter and Rocard on stability of locomotives. A rediscovery of their knowledge, which seemed to have been forgotten, was inevitable due to increased vehicle speeds since the early Fifties. — Though investigations on road vehicle stability only began approximately in 1930 with the treatment of the shimmy phenomenon, realistic solutions were available at the same time as for railway vehicles. Besides considering historical aspects we discuss in the paper links which exist between both approaches; open questions are described.     

Vessel traffic service systems: cost-recovery alternatives

This paper investigate cost-recovery alternatives for US federally-operated vessel traffic service (VTS) systems. These include those currently used or have been used by VTS and 'VTS-like' systems and other feasible, but not used herefore, alternatives, a federal trust and a federal VTS user-fee structure. Three federal trust funds exist whose waterway-related earmarked revenues could also be earmarked for VTS systems. A federal VTS user-fee structure while raising revenue to finance VTS systems is not expected to be detrimental to the competitiveness of VTS ports nor to the vessel operators that call if their cost-savings exceed fees paid.     

Traffic noise and traffic light control

An optimal control problem of traffic light duration is considered. The traffic noise level is introduced as a state variable in a dynamical optimization problem. A closed loop control system is designed which influences the green duration of the lights according to the equivalent noise level. Real time considerations lead to sub-optimal control implementation. This control policy decreases the noise levels at intensive traffic intersections. The traffic lights adapt their duration according to the noise pollution. Simulation and experimental results are discussed.     

Measure of productivity loss due to road traffic accidents in Thailand

As one of the top countries with the highest casualties per capita in road traffic accidents, Thailand needs to raise public awareness about the economic loss from road traffic crashes. This paper calculates the value of productivity loss due to road traffic accidents in Thailand in 2017. Extensive data collection and analyses enable to compute income losses over time in case of fatalities, permanent disabilities as well as major and minor injuries. The results reveal that, at the end of 2017, the total amount of productivity loss caused by road traffic accidents alone was approximately 121 billion Baht (45 billions for fatalities, 7 for disabilities, 67.5 for serious injuries and 1.5 for slight injuries), or close to 0.8% of the country's GDP, which is very significant. At-risk age groups are determined in each case and we see that the 16–25 age group is bearing the highest burden in all types of accidents. Future policies can then be targeted to types of casualties and to a specific public.     

Modelling rain effects on risk‐taking behaviours of multi‐user classes in road networks with uncertainty

This paper proposes a new travel time reliability‐based traffic assignment model to investigate the rain effects on risk‐taking behaviours of different road users in networks with day‐to‐day demand fluctuations and variations in travel time. A generalized link travel time function is used to capture the rain effects on vehicle travel times and road conditions. This function is further incorporated into daily demand variations to investigate those travel time variations arising from demand uncertainty and rain condition. In view of these rain effects, road users' perception errors on travel times and risk‐taking behaviours on path choices are incorporated in the proposed model with the use of a logit‐based stochastic user equilibrium framework. This new model is formulated as a variational inequality problem in terms of path flows. A numerical example is used to illustrate the application of the proposed model for assessment of the rain effects on road networks with uncertainty.     

利用AGM求解粘弹性地基刚性梁的非线性控制微分方程（英文）

In the present paper a vibrational differential equation governing on a rigid beam on viscoelastic foundation has been investigated. The nonlinear differential equation governing on this vibrating system is solved by a simple and innovative approach, which has been called Akbari-Ganji’s method(AGM). AGM is a very suitable computational process and is usable for solving various nonlinear differential equations. Moreover, using AGM which solving a set of algebraic equations, complicated nonlinear equations can easily be solved without any mathematical operations.Also, the damping ratio and energy lost per cycle for three cycles have been investigated. Furthermore, comparisons have been made between the obtained results by numerical method(Runk45) and AGM. Results showed the high accuracy of AGM. The results also showed that by increasing the amount of initial amplitude of vibration(A), the value of damping ratio will be increased, and the energy lost per cycle decreases by increasing the number of cycle. It is concluded that AGM is a reliable and precise approach for solving differential equations. On the other hand, it is better to say that AGM is able to solve linear and nonlinear differential equations directly in most of the situations. This means that the final solution can be obtained without any dimensionless procedure.Therefore, AGM can be considered as a significant progress in nonlinear sciences.