Bumper optimum design using the dynamically equivalent beam under various impact conditions

Nowadays it is required for the bumper system to meet the various impact conditions simultaneously; barrier impact, IIHS (Insurance Institute for Highway Safety) bumper impact and pedestrian impact. Firstly, dynamically equivalent bumper beam models were developed for each impact condition and its accuracy was verified by nonlinear finite element analysis result. Dynamically equivalent pedestrian impact beam model was developed by using the equivalent forces of bumper beam and stiffeners. Pedestrian bending angle was obtained by using this equivalent pedestrian beam model. By combining these equivalent beam models, bumper optimum design program was developed. In this optimum design program, direct search method was used for the optimization algorithm. To verify the accuracy of this optimum design program, a nonlinear finite element result was used. By using this optimum design program, it can be secured the bumper impact performances in an early design stage and it will be also contributed to reduce the design time and test costs.     

Modeling the Effects of Population Density on Prospect Theory-Based Travel Mode-Choice Equilibrium

In conventional transportation planning models, it was always assumed that the population density is given and fixed in the study areas. Therefore, the effects of population density on travel choice have not been explicitly incorporated into these existing models for long-term transportation planning. Meanwhile, travel choice models in previous studies are usually developed by using discrete choice theories or user equilibrium principle. Thus, many significant characteristics of travelers’ behaviors, such as risk preference and learning process over time, cannot be considered in these conventional models. This article proposes a convex prospect theory-based model to investigate the effects of population density on the travelers’ mode-choice behavior under an advanced transportation information system (ATIS) in a multimodal transportation corridor. It is shown that population density is closely co-related to the modal split results and dependent on the performance of the railway mode in the study corridor. The park-and-ride mode may not be suitable for areas with high population density. This article also investigates the travelers’ reference points on the generalized travel costs by modes. A numerical example is given to illustrate the properties of the proposed model together with some insightful findings.     

水下拖缆抛物构型分析研究(英文)

This article discusses the dynamic state analysis of underwater towed-cable when tow-ship changes its speed in a direction making parabolic profile path. A three-dimensional model of underwater towed system is studied. The established governing equations for the system have been solved using the central implicit finite-difference method. The obtained difference non-linear coupled equations are solved by Newton's method and satisfactory results were achieved. The solution of this problem has practical importance in the estimation of dynamic loading and motion, and hence it is directly applicable to the enhancement of safety and the effectiveness of the offshore activities.     

Analyzing parabolic profile path for underwater towed-cable

This article discusses the dynamic state analysis of underwater towed-cable when tow-ship changes its speed in a direction making parabolic profile path. A three-dimensional model of underwater towed system is studied. The established governing equations for the system have been solved using the central implicit finite-difference method. The obtained difference non-linear coupled equations are solved by Newton＇s method and satisfactory results were achieved. The solution of this problem has practical importance in the estimation of dynamic loading and motion, and hence it is directly applicable to the enhancement of safety and the effectiveness of the offshore activities.     

Developing a Sustainable Community-Based Aquaculture Plan for the Lagoon of CuyutlÀn through a Public Awareness and Involvement Process

This study presents evidence from the Cuyutlàn lagoon, which demonstrates that aquaculture can be socially acceptable, economically viable and environmentally friendly when consideration is first taken of the local circumstances and environment. This evidence was obtained through a user survey, which asked key questions of the local fishing community. These questions aimed to determine the desires and needs of the local community in the context of the local environment. The results from this survey of 56% of the fishing community were presented. The wishes of the fishing community are discussed and a compromise suggested for a sustainable aquaculture for the Cuyutlàn lagoon.     

An inter‐Urban freight mode choice model

The Australian Railway Research and Development Organisation is conducting a study with one of its objectives being to determine factors affecting freight mode use. Part of this has included the development and calibration of freight mode choice models. This paper outlines the results obtained from the application of an Elimination‐by‐Aspects (EBA) model to this task. The paper describes the theoretical background to the EBA model, within the context of a general choice process, and then describes the results of the model when applied to three samples of shippers involved in regional freight transport.     

An assessment of the demand for new transport technology in Australia

This paper summarizes the constraints which a technological innovation in transport must satisfy if it is to achieve widespread application. The existing and likely future travel demands in Australia are reviewed, and for certain types of travel it is concluded that existing modes may become unsuitable or unacceptable. In these areas, it is possible that a new transport technology may find application. In all other areas, it is considered that existing modes, or their functional successors, will continue.

Five possible demand areas in which new transport technology may find application are identified. These are as follows:

1) High speed distribution systems may be introduced in Australian CBD's (Central Business Districts) within the next ten years. These may be progressively extended to provide radial public transport services to the CBD. It is also possible that these systems may eventually be extended to provide a dual‐mode capability in inner‐suburban areas as a partial alternative to freeway construction.

2) New town developments which may be introduced in Australia could include various forms of advanced transportation systems.

3) New aviation modes, possibly including short take off and landing aircraft operating from suburban airports may be introduced to cater for inter‐urban travel.

4) A demand‐responsive transport system to cater for the needs of the transport poor in urban areas may find limited application.

5) In the longer term, possibly by the turn of the century, an improved transport system capable of providing door‐to‐door service over the whole of an urban area and operating under a dual‐mode configuration appears to be possible. It probably would emerge from development of an incremental nature and eventually include the installation of a new technology in the then existing freeway and railway reservations in the city.     

A model of managers’ preferences for location of freight facilities

The paper reviews the need for a better understanding of the factors which affect the location of freight facilities, such as depots, terminals, freight forwarding centres, distribution centres, etc. The development of an Elimination by Aspects (EBA) model to analyse such location decisions by the managers of freight firms is described. The results are shown to be comparable (perhaps even superior to) those obtained with a logit model. Conclusions are drawn with respect to both the use of the EBA model to analyse freight facility location preference, and the factors which affect such preference. Five factors were found to be significant: closeness to existing customers, closeness to arterial roads, availability of suitable sites, cost of truck fleet operation, and closeness to labor.