EFFECT OF La-RICH RE ON THE STRUCTURE AND PROPERTIES OF B319 ALLOY IN LOST FOAM CASTING

IntroductionLost foam casting( LFC) process is a newtechnology that is different from the conventionalempty mould cavity casting completely.This tech-nology is an important orientation of casting tech-nology,and is called as casting technology for to-morrow.At present,the studies on LFC are fo-cused on casting techniques mainly[1～ 5] .There islittle information on the structure and mechanicalproperties of B31 9in LFC process.Now for alu-minum alloy in LFC process,the main problemsare se…     

天然岩沥青改性对沥青流变性能的影响

借助动态剪切流变仪(DSR)、低温弯曲流变仪(BBR)和Brookfild旋转黏度仪,对不同掺量的天然岩沥青改性沥青的性能进行了试验研究,分析了岩沥青改性剂对基质沥青流变性能的影响。结果表明:加入岩沥青后沥青胶结料的PG高温等级和黏度提高,抗车辙因子增大,相位角减小,大大提高了沥青的高温稳定性和降低了温度敏感性,且随着掺量的增加变化幅度增大;低温条件下蠕变劲度模量增大,低温性能有所下降,但当岩沥青掺量为2%~8%时,不会对沥青胶结料的低温性能产生大的不利影响。     

基于大规模定制的旅游业顾客保留模型研究

在对大规模定制理论、顾客保留理论进行文献综述的基础上,分析了基于大规模定制的旅游业顾客保留的内涵及影响因素,包括个性化体验质量、定制服务质量、定制价格水平、转移障碍等,构建了基于大规模定制的旅游业顾客保留模型,设计了共18个测量变量,并以中国国旅(武汉)国际旅行社有限公司为实证对象,对构建的理论模型进行了实证研究.     

Timing sequence changes of landscape plants in Shanghai Area,China

Based on published reports and direct observation, the common resources of landscape plant species in the Shanghai area were identified and studied in terms of the landscape characteristics of timing sequence changes over a one year time period. The results showed that there were 199 common landscape plant species in Shanghai, distributed in 67 families and 129 genera. These plants were categorized by three ornamental characteristics: flowers, foliage and fruits. The species were thus further analyzed according to the time periods which these characteristics were present. The results showed that flower ornamental distributed throughout the year, particularly from April to June, and plant species with colorful foliage could be seen every month, and particularly in November and December. On the other hand, few plant species with fruit ornamentals were observed in Shanghai area. The diversity of landscape timing sequence changes of the 199 plant species under examination was then analyzed by using the Shannon-Weiner and Simpson index formulas. The results showed that the higher diversity was observed in January, February and from August to October, while the lowest diversity was recorded from March to July and during November and December. The diversity of landscape characteristics of these plants was ranked according to foliage, flowers and fruit. Using this method, one park and one plant community were selected to evaluate the advantages and disadvantages of their time-changing plant landscape, with the goal of assessing the validity of the chosen ranking method. These results in the present study would be helpful to evaluate the plant landscape in a specified space and further enrich the diversity of plant and landscape by a target-oriented way.     

Study on launch dynamics of the tank marching fire

As an army main battle equipment, it is required that the tank should have high firing accuracy and high first round hit probability during marching. The initial disturbance of the projectile is the premier factor that takes effect on the marching fire accuracy of the tank. And the marching fire accuracy of the tank depends on the launch dynamics behaviors of the tank. In this paper, the launch dynamics theory of a tank marching fire is studied, and its launch dynamics model is established. Based on the transfer matrix method for multibody system(MSTMM) and the automatic deduction theorem of overall transfer equations, the overall transfer equation and the overall transfer matrix of a tank multibody system are deduced; the launch dynamics equations of the tank marching fire are deduced, and the dynamic response of the tank system, the motion of projectile in barrel, the initial disturbance of the projectile and the vertical target dispersion are exactly simulated; meanwhile, the results of simulation are verified by tests. This work provides both theoretical foundation and simulation approaches for improving the marching fire accuracy of the tank.     

船舶电网电能质量的数字测量系统研究

分析了船舶电网的特点和船舶电网电能质量参数,阐述了对船舶电网电压畸变进行测量的重要性,提出了将传统的船舶电网电压畸变的模拟式测量法改进为数字式测量法。同时设计了一种适合船舶应用的数字型电压谐波测量系统。该系统用于船舶电力推进物理仿真实验系统电压谐波畸变的测量后,其试验结果证明了该测量系统适用于船舶电网电能质量的参数测量。     

安特卫普港:进入欧洲的理想门户

<正>欧洲第2大港安特卫普港位于斯海尔德河下游,距离北海约80km,地处西北欧中心位置,通过公路、铁路、内河等运输方式可方便快捷地抵达欧洲主要工业中心和消费中心,是进入欧洲的理想门户。     

面向复杂环境的LNG码头合理布局规模仿真案例分析

LNG船舶通过限制性航道进出港时须采取一定的管控措施,具有显著的排他性,布局LNG码头时须确定合理的码头规模,以保障港区各类船舶通航效率。基于多智能体复杂系统的混合模拟仿真建模方法,以宁波舟山港六横港区南侧岸线新布局LNG码头研究为例,建立不同的仿真情境,通过设定的指标进行评价分析,研判在一定通航管控措施条件下六横港区南侧LNG码头合理布局规模,为港口码头布局和岸线合理利用提供决策依据。     

波浪作用下海洋立管试验研究及ANSYS数值模拟

海洋立管在石油工业生产中有着非常广泛的应用,同时也是薄弱易损的构件之一。立管管内有高温高压的流体流过,管外承受海洋环境荷载尤其是波浪荷载的作用,受力比较复杂。由于中国大部分的海上油田水深都比较浅,所以重点研究浅水中的海洋立管。运用相似理论将实际立管模型缩放为试验模型,在管内流体流动及管外波浪荷载作用下,测量立管动力响应,并与Ansys有限元数值模拟结果进行了比较。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.