César Marín Fernández  V. F. Gómez  R. M. Arnaldo 《先进运输杂志》2016,50(6):1225-1251

This article considers the optimisation of the sequence for clearing snow from stretches of the manoeuvring area of an airport. This issue involves the optimisation of limited resources to remove snow from taxiways and runways thereby leaving them in an acceptable condition for operating aircraft. The airfield is divided into subsets of significant stretches for the purpose of operations and target times are established during which these are open to aircraft traffic. The document contains several mathematical models each with different functions, such as the end time of the process, the sum of the end times of each stretch and gap between the estimated and the real end times. During this process, we introduce different operating restrictions on partial fulfilment of the operational targets as applied to zones of special interest, or relating to the operation of the snow‐clearing machines. The problem is solved by optimisation based on linear programming. The article gives the results of the computational tests carried out on five distinct models of the manoeuvring area, which cover increasingly complex situations and larger areas. The mathematical model is particularised for the case of the manoeuvring area of Adolfo Suarez Madrid—Barajas Airport. Copyright © 2016 John Wiley & Sons, Ltd.

Highlights
• Optimal sequence for clearing snow from the manoeuvring area of an airport.
• Contains optimising algorithms solved using CPLEX LP‐based tree search.
• Restrictions on partial fulfilment of operational targets applied to subsets of significant stretches, used for planning the operation of snow‐clearing machines.
• Model applied to the case of the manoeuvring area of Adolfo Suárez Madrid Barajas Airport.
• Conclusions are given on the results of the computational tests carried out. There are five models of the manoeuvring area which cover increasingly complex situations and larger areas.

  相似文献   

    

Hongtai Yang  Christopher R. Cherry  Russell Zaretzki  Megan S. Ryerson  Xiaobo Liu  Zhijian Fu 《先进运输杂志》2016,50(8):1770-1784

Deviated fixed route transit (DFRT) service connecting rural and urban areas is a growing transportation mode in the USA. Little research has been done to develop frameworks for route design. A methodology to explore the most cost‐effective DFRT route is presented in this paper. The inputs include potential DFRT demand distribution and a road network. A heuristic is used to build possible routes by starting at urban cores and extending in all network directions in certain length increments. All the DFRT routes falling in the length range desired by the users are selected. The cost effectiveness of those routes, defined by operating cost per passenger trip, is compared. The most cost‐effective route is selected and presented in a GIS map. A case study illustrates the methodology in several Tennessee metropolitan regions. The most cost‐effective route length is case specific; some routes (e.g. those out of our Nashville case) are most cost effective when short, while others (e.g. those out of Memphis) are most cost effective when long. Government agencies could use the method to identify routes with the lowest operating cost per passenger given a route length or an operating cost budget. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

    

Ana T. Moreno  Carlos Llorca  Scott S. Washburn  José E. Bessa  David K. Hale  Alfredo Garcia 《先进运输杂志》2016,50(8):1650-1665

The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two‐lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two‐lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

    

Lambros K. Mitropoulos  Panos D. Prevedouros 《运输规划与技术》2016,39(5):439-463

Environmental assessments are on the critical path for the development of land, infrastructure and transportation systems. These assessments are based on planning methods which, in turn, are subject to continuous enhancement. The substantial impacts of transportation on environment, society and economy strongly urge the incorporation of sustainability into transportation planning. Two major developments that enhance transportation sustainability are new fuels and vehicle power systems. Traditional planning ignores technology including the large differences among conventional, hybrid and alternative fuel vehicles and buses. The introduction of alternative fuel vehicles is likely to change the traditional transportation planning process because different characteristics need to be taken into account. In this study a sustainability framework is developed that enables assessment of transportation vehicle characteristics. Identified indicators are grouped in five sustainability dimensions (Environment, Technology, Energy, Economy and Users). Our methodology joins life cycle impacts and a set of quantified indicators to assess the sustainability performance of seven popular light-duty vehicles and two types of transit buses. Bus Rapid Transit receives the highest sustainability index and the pickup truck the lowest. Hybrid electric vehicles are found to have the highest sustainability index among all other passenger vehicles. A sensitivity analysis shows the proposed sustainability dimensions produce robust sustainability assessment for several weighting scenarios. The results are both technology and policy sensitive, thus useful for both short- and long-term planning.  相似文献   

    

Tao Feng  Harry J.P. Timmermans 《运输规划与技术》2016,39(2):180-194

Global Positioning System (GPS) technologies have been increasingly considered as an alternative to traditional travel survey methods to collect activity-travel data. Algorithms applied to extract activity-travel patterns vary from informal ad-hoc decision rules to advanced machine learning methods and have different accuracy. This paper systematically compares the relative performance of different algorithms for the detection of transportation modes and activity episodes. In particular, naive Bayesian, Bayesian network, logistic regression, multilayer perceptron, support vector machine, decision table, and C4.5 algorithms are selected and compared for the same data according to their overall error rates and hit ratios. Results show that the Bayesian network has a better performance than the other algorithms in terms of the percentage correctly identified instances and Kappa values for both the training data and test data, in the sense that the Bayesian network is relatively efficient and generalizable in the context of GPS data imputation.  相似文献   

    

J.A. Mohrfeld-Halterman 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2016,54(1):124-136

Presented in this paper is a procedure to develop a high fidelity quasi steady-state aerodynamic model for use in race car vehicle dynamic simulations. Developed to fit quasi steady-state wind tunnel data, the aerodynamic model is regressed against three independent variables: front ground clearance, rear ride height, and yaw angle. An initial dual range model is presented and then further refined to reduce the model complexity while maintaining a high level of predictive accuracy. The model complexity reduction decreases the required amount of wind tunnel data thereby reducing wind tunnel testing time and cost. The quasi steady-state aerodynamic model for the pitch moment degree of freedom is systematically developed in this paper. This same procedure can be extended to the other five aerodynamic degrees of freedom to develop a complete six degree of freedom quasi steady-state aerodynamic model for any vehicle.  相似文献   

    

T. P. J. van der Sande  I. J. M. Besselink  H. Nijmeijer 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2016,54(3):281-300

In this paper, a rule-based controller is developed for the control of a semi-active suspension to achieve minimal vertical acceleration. The rules are derived from the results obtained with a model predictive controller. It is shown that a rule-based controller can be derived that mimics the results of the model predictive controller and minimises vertical acceleration. Besides this, measurements on a test vehicle show that the developed rule-based controller achieves a real-world reduction of the vertical acceleration, which is in agreement with the simulations.  相似文献   

    

Malcolm C. Smith  Stuart J. Swift 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2016,54(5):568-584

This paper studies the use of the least damping ratio among system poles as a performance metric in passive vehicle suspensions. Methods are developed which allow optimal solutions to be computed in terms of non-dimensional quantities in a quarter-car vehicle model. Solutions are provided in graphical form for convenient use across vehicle types. Three suspension arrangements are studied: the standard suspension involving a parallel spring and damper and two further suspension arrangements involving an inerter. The key parameters for the optimal solutions are the ratios of unsprung mass to sprung mass and suspension static stiffness to tyre vertical stiffness. A discussion is provided of performance trends in terms of the key parameters. A comparison is made with the optimisation of ride comfort and tyre grip metrics for various vehicle types.  相似文献   

    

Zhendong Liu  Per-Anders Jönsson  Sebastian Stichel  Anders Rønnquist 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2016,54(8):1077-1097

The contact between pantograph and catenary at high speeds suffers from high dynamic contact force variation due to stiffness variations and wave propagation. To increase operational speed on an existing catenary system, especially for soft catenary systems, technical upgrading is usually necessary. Therefore, it is desirable to explore a more practical and cost-saving method to increase the operational speed. Based on a 3D pantograph–catenary finite element model, a parametric study on two-pantograph operation with short spacing distances at high speeds shows that, although the performance of the leading pantograph gets deteriorated, the trailing pantograph feels an improvement if pantographs are spaced at a proper distance. Then, two main positive effects, which can cause the improvement, are addressed. Based on a discussion on wear mechanisms, this paper suggests to use the leading pantograph as an auxiliary pantograph, which does not conduct any electric current, to minimise additional wear caused by the leading pantograph. To help implementation and achieve further improvement under this working condition, this paper investigates cases with optimised uplift force on the leading pantograph and with system parameter deviations. The results show that the two positive effects still remain even with some system parameter deviations. About 30% of speed increase should be possibly achieved still sustaining a good dynamic performance with help of the optimised uplift force.  相似文献   

    

H. -D. Kang  D. -H. Kim  S. -W. Chae  J. -N. Han  D. -S. Kim 《International Journal of Automotive Technology》2009,10(5):583-587

Most of the research on safety belt systems has involved crash simulation that only considered a dynamic human model. However, belt routing analysis, usually known as comfort level estimation, is also an important factor in safety belt design, considering that serious injuries of the abdominal region result from the infiltration of a belt into the neck or the chest. Thus, safety belt evaluations using kinematic human models are also needed. In this paper, a belt fit simulation method is suggested. Using the proposed process, both comfort and safety analyses can be performed under the same conditions continuously, and thus the safety belt design parameters, such as the location of anchor points, dummy posture and etc., can be evaluated. In conclusion, this computer process enables a belt system design to reduce injuries.  相似文献