Vehicle interior noise model based on a power law

Identifying the components of a vehicle’s interior noise is important in many phases of the noise, vibration, and harshness (NVH) development process. Many test methods that have been widely used in the automobile industry to separate noise sources are based on system identification methods in the frequency domain. However, none of the frequency response function-based methods can directly estimate the wind noise component. In this article, an analytical model for the interior noise level based on a simple power law was developed. It was assumed that the mean squared acoustic pressure for the interior noise could be obtained by summing up those of the wind noise, road noise, and background noise. The wind noise and road noise were further assumed to depend only on wind speed and the vehicle’s driving speed, respectively, and to follow a simple power law. The resulting analytical model includes five parameters that can be optimized for the vehicle and the road. The validity of the model was verified by using data obtained from cruise tests performed on a proving ground for cruise speeds ranging from 40 km/h to 130 km/h. The model is applied to the overall and 1/3-octave bands of interior noise and is shown to describe the data trends fairly well. For the test vehicle used in the present work, the overall mean squared pressures for the wind and road noise components are shown to be proportional to the wind speed to the 5.8 power and to the driving speed to the 3.4 power, respectively.     

Piston-temperature measuring system using electromagnetic induction with verification by a telemetry system

The development of an inner-piston-chamber temperature measurement system is a necessary step in engine development or when solving other fundamental problems related to automotive engines. There are various pre-existing measurement methods available, e.g., the linkage method, piston telemetry, templog, and the electromagnetic induction method. In this study, we first redesigned the coil sensor used in the electromagnetic induction method using PEEK and then used Taguchi methods to reduce the number of experiments in the development process and finally utilized piston telemetry via Bluetooth to verify the precision and accuracy of the redesigned PEEK coil sensor and electromagnetic induction method. The results displayed a reproducibility within 0.5 degrees and an accuracy within 2 degrees Celsius.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Effect of fuel stratification on initial flame development: Part 3-high swirl condition

This paper discusses the final investigation into the effect of fuel stratification on flame propagation. In previous works, the characteristics under the no port-generated swirl condition and the low-swirl condition were considered. For this purpose, the initial flame development and propagation were visualized under different axially stratified states in a modified optical single-cylinder SI engine. The images were captured by an intensified CCD camera through the quartz window mounted in the piston. Stratification was controlled by the combination of the port swirl ratio and injection timing. These were averaged and processed to characterize the flame propagation. The flame stability was estimated by the weighted average of flame area and luminosity. The stability was also evaluated through the standard deviation of flame area and propagation distance and through the mean absolute deviation of the propagation direction. The results show that the LML is expanded remarkably under the high-swirl cases up to the highest relative AFRs of 1.71 and 1.75 between 140 and 160CA. In addition, similar to the low-swirl condition, the flame-flow interaction determines the direction of flame propagation, and the governing roles of the two factors vary according to the swirl level; the flow is more important at the higher swirl conditions, and the flame is more important at the lower swirl condition. Finally, fast and stable flame propagation can be achieved under the preferably stratified condition, which is induced by the suitable combination of the high swirl and injection timing.     

Seaport research: A structured literature review on methodological issues since the 1980s

This study aims to investigate how seaport research has been conducted from the methodological perspective. To this end, this study reviews published port literature for the last three decades (1980-2000s). The investigation primarily categorises the literature according to various methodological issues such as research paradigm, research strategy, base-disciplines, research methods and analysis techniques in order to provide meaningful implications on methodological evolution in seaport research for the period. This study suggests methodological bias in port research to a positivistic paradigm, following a quantitative trajectory moving from conceptual to empirical studies. In addition, the increased use of mathematical modelling and advanced statistical analysis methods is clearly observed. The introduction of advanced analytical tools used in other academic disciplines facilitates discussions in particular research area and amplifies the literature in those areas. This paper also suggests research gaps from the methodological perspective and implications for future port research.     

Mobility, social exclusion and well-being: Exploring the links

Building on a growing research foundation, transport policy makers have begun to associate the ability to be mobile with having a role in the facilitation of social inclusion. However, the further connection to well-being is not as well understood. This paper explores the association between a person’s travel patterns, their risk of social exclusion and self-assessed well-being. Key influences on social exclusion are discussed, with trip making emerging as a significant influence. Trip making is not a significant direct influence on well-being but does exercise an indirect influence through the impact on risk of social exclusion. The modelling process enables a value for additional trips to be estimated, the value being about four times the values derived from conventional generated traffic approaches. Similar high values are found in separate metropolitan and regional case studies, confirming the significance of the results.     

中国城市道路规划方位性问题研究

文章结合中国的传统建筑文化理念和现代科学原理,从历史文化、能源节约、环境保护、房地产定价、交通安全等多方面分析研究了城市道路在规划和设计时所应遵从的定向规则。     

Time-variant ultimate longitudinal strength of corroded bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. In aging ships, corrosion and fatigue cracks are the two most important factors affecting structural safety and integrity. This paper uses a set of the time-dependent corrosion wastage models for 23 different member locations/categories of bulk carriers previously developed by the authors, based on the available corrosion measurements for existing large bulk carrier structures. Differences due to the location and corrosion severity of every member type are taken into account. The nominal design corrosion values for the primary members are suggested based on the annualized corrosion rates obtained in the present study. The effect of time-variant corrosion wastage on the ultimate hull girder strength as well as the section moduli is studied. The criteria for repair and maintenance of heavily corroded structural members so as to keep the ultimate longitudinal strength at an acceptable level are discussed. Important insights and conclusions developed are summarized.     

Origin–destination synthesis for aviation network data: examining hub operations in the domestic and international US markets

Hub‐and‐spoke networking is a key feature of current aviation markets in which hubs, as connecting points, function to consolidate and redistribute flows. This indicates that observation of traffic on a segment does not necessarily convey information about the origin to destination routing of passenger journeys because of the unavoidable detours in the system. This paper examines the heterogeneity of the flow composition in domestic and international US markets, which in turn allows us to observe the variation of operations across major hubs. A modified Route Flow Estimator for origin–destination synthesis (or origin–destination matrix estimation) is designed to decompose the segment traffic into itinerary‐based passenger trips. Several public and commercial databases, which are easily accessible, are exploited (and reconciled) for the model in order to (i) generate possible trip itineraries using those segment markets, and (ii) link data‐driven operational conditions with the underlying segment flows. The results are validated with US domestic trip observations and empirical knowledge related to the air transportation system. Then, the variability of the hub operations is examined based on sensitivity tests using the model parameters. From the resolution of itinerary‐based estimates, we observe that major airports' hub operations are spatially uneven, particularly with respect to domestic and international connecting passengers. Copyright © 2017 John Wiley & Sons, Ltd.