A novel adaptive algorithm with an IIR filter and a variable step size for active noise control in a short duct

The intake system in an automotive engine has a short duct compared with that of the exhaust system. The filtered-x LMS (FX-LMS) algorithm has been applied to the active noise control (ANC) system in a short acoustic duct. This algorithm design is based on the FIR (finite impulse response) filter; however, it has a slow convergence issue due to a large number of zero coefficients. To improve the convergence performance, the step size of the LMS algorithm was modified from fixed to variable. However, this algorithm is still not suitable for the ANC system of a short acoustic duct because the reference signal is affected by the backward acoustic wave propagated from a secondary source. Therefore, the recursive filtered-u LMS algorithm (FU-LMS) based on the infinite impulse response (IIR) is developed to consider backward acoustic propagation. Generally, this algorithm has a stability problem. The stability issue was improved using an error-smoothing filter. In this paper, the recursive LMS algorithm with a variable step size and smoothing error filter is designed. This recursive LMS algorithm, the FU-VSSLMS algorithm, uses an IIR filter. With fast convergence and good stability, this algorithm is suitable for the ANC system in a short acoustic duct, such as the intake system of an automotive engine. This algorithm is applied to the ANC system of a short acoustic duct. The disturbance signals used as primary noise source are a sinusoidal signal embedded in white noise and the chirp signal, which has a variable instantaneous frequency. The test results demonstrate that the FU-VSSLMS algorithm has a superior convergence performance when compared with the FX-LMS and FX-LMS algorithms. The algorithm can be successfully applied to the ANC system in a short duct, such as the intake duct.     

Development of a fail-safe control strategy based on evaluation scenarios for an FCEV electronic brake system

This study presents a few fail-safe control strategies based on reliability evaluation scenarios for the electronic brake systems of green cars in several critical cases. CarSim and MATLAB Simulink were used to develop the FCEV model with regenerative braking involving EWBs and EMBs. The proposed reliability evaluation scenarios were simulated, and a few fail-safe control algorithms were verified using the proposed reliability evaluation scenarios with the developed FCEV simulation model. The reliability evaluation scenarios were developed using a combination of driving modes and FMEA results for these electronic brake systems.     

Nonlinear tire-road friction control based on tire model parameter identification

A hierarchical control structure is a more suitable structural scheme for integrated chassis control. Generally, this type of structure has two main functions. The upper layer manages global control and force allocation, while the bottom layer allocates realized forces with 4 independent local tire controllers. The way to properly allocate these target forces poses a difficult task for the bottom layer. There are two key problems that require attention: obtaining the nonlinear time-varying coefficient of friction between the tire and different road surfaces and accurately tracking the desired forces from the upper layer. This paper mainly focuses on longitudinal tire-road friction allocation and control strategies that are based on the antilock braking system (ABS). Although it is difficult to precisely measure longitudinal tire-road friction forces for frequently changing road surface conditions, they can be estimated with a real-time measurement of brake force and angular acceleration at the wheels. The Magic Formula model is proposed as the reference model, and its key parameters are identified online using a constrained hybrid genetic algorithm to describe the evolution of tire-road friction with respect to the wheel slip. The desired wheel slip, with respect to the reference tire-road friction force from the top layer, is estimated with the inverse quadratic interpolation method. The tire-road friction controller of the extended anti-lock braking system (Ext-ABS) is designed through use of the nonlinear sliding mode control method. Simulation results indicate that acceptable modifications to changes in road surface conditions and adequate stability can be expected from the proposed control strategy.     

Adaptive neural network based fuzzy control for a smart idle stop and go vehicle control system

Idle stop and go (ISG) is a low cost but very effective technology to improve fuel efficiency and reduce engine emissions by preventing unnecessary engine idling. In this study, a new method is developed to improve the performance of conventional ISG by monitoring traffic conditions. To estimate frontal traffic conditions, an ultra-sonic ranging sensor is employed. Several fuzzy logic algorithms are developed to determine whether the engine idling is on or off. The algorithms are evaluated experimentally using various data gathered in real areas with traffic congestion. The evaluation results show that the method developed can reduce the chance of false application of ISG significantly while improving fuel efficiency up to 15%.     

Optimization of intake port design for SI engine

It is well known that in-cylinder flow is very important factor for the performance of SI engine. An appropriate in-cylinder flow pattern can enhance the turbulence intensity at spark time, therefore increasing the stability of combustion, reducing emission and improving fuel economy. In this paper, the effect of intake port design on in-cylinder flow is studied. It is found a vortex existed at the upper side of intake port of a production SI engine used in the study, during the intake stroke, which will reduce both tumble ratio and volumetric efficiency. A minor modification on intake port is made to eliminate the vortex and increase tumble ratio while keeping volumetric efficiency at the same level. It is demonstrated that the increase in tumble in the new design results in a 20 per cent increase in the fuel vaporization. In this study, both KIVA and STAR-CD are used to simulate the engine cold flow, as well as ICEM CFD and es-ice used as pre-processor respectively due to the complexity of engine geometry. Simulation results from KIVA and STAR-CD are compared and analyzed.     

Integration of a single cylinder engine model and a boost system model for efficient numerical mapping of engine performance and fuel consumption

A numerical engine mapping methodology is proposed for the engine performance and fuel consumption map generation. An integrated model is developed by coupling a single cylinder GT-Power® engine model with a MATLAB/ Simulink® based boost system model to simulate a turbocharged diesel engine over the entire engine operating speed and load ranges within reasonable computational constraints. A single cylinder engine model with the built-in multi-zone combustion modeling option in GT-Power® is configured as a predictive engine model. The cycle averaged simulation result from the engine model is used as the boundary conditions of the boost system including intake and exhaust manifolds and a turbocharger. The boost system model developed in MATLAB/Simulink® platform calculates the intake and exhaust conditions which are fed back to the engine model. The integrated system model predicts the performance and fuel consumption of a turbocharged diesel engine with better predictive capability than mean value engine models. Its computational time is fast enough to simulate the engine over the entire engine operation range compared to multi-cylinder engine models.     

Deregulating the bus industry in Britain: a rejoinder

In our critique for the Buses White Paper, we argued that ‘competition for licences’ could achieve most of the benefits of competition without the major disadvantages of ‘competition on the road’. In response to the comments of Beesley and Glaister, we explain how comprehensive franchising of good and bad routes alike would encourage effective competition, whilst providing conditions for the transparent continuation of cross‐subsidy where that was the choice of the local authority in question. We correct their misrepresentation of our arguments on the desirability of cross‐subsidy and on the case for minibuses, and explain why we believe that such cost savings as are achieved will be mainly at the expense of staff or customer service. Finally, we restate the case for believing that a unified planned timetable will provide a better service for a given level of resources than will uncoordinated competitive services.     

Lane assignment problem using a genetic algorithm in the Automated Highway Systems

This paper deals with the lane assignment problem in the Automated Highway Systems (AHS). The purpose of lane assignment strategies is to increase throughput on multi-lane highways with many entry and exit points, based on the itineraries of vehicles using the highway (point of entry, time of entry and exit point) and the effects of maneuvers. Using partitioned lane assignment strategies, the lane assignment problem is formulated as an optimization problem to find the proper positions of partitions. Then the optimal problem is solved using a Genetic Algorithm (GA). The proposed algorithm has been validated by comparing its solution with that of an all-cases algorithm for a simple case. Moreover, a traffic simulator with a realistic car-following model as well as lane change logic has been developed. The simulation results show the efficiency of the proposed genetic algorithm, compared with random assignment algorithms.     

The safety of ferries: an accident injury perspective

This study investigates determinants of fatal and non-fatal injuries in ferry vessel accidents. Poisson regression estimates indicate that fatal and non-fatal injuries are 3.35 and 4.46% higher for fire/explosion than for material/equipment failure or grounding accidents, and 3.13 and 3.38% higher for multi-vessel than for single-vessel accidents. Non-fatal injuries are higher when the weather is foggy but less at night and the older the ferry. Estimated marginal effects indicate that every 100 fire/explosion accidents result in 6.1 fatal injuries, while each fire/explosion accident results in approximately one non-fatal injury.