特长高速公路隧道通风斜井钢波纹板式中隔墙技术研究北大核心CSCD

通风导洞中隔墙一般采用技术较为成熟的混凝土中隔墙,但存在表面粗糙、工艺复杂、施工进度不易控制等缺点,无法适用于风道较为复杂的工程。文章以东天山隧道1号斜井为依托,提出了节能型全拼装式钢波纹板中隔墙技术,通过数值模拟以及理论计算的方法验证其在单洞四风道通风斜井中的可行性。研究结果表明:钢波纹板式中隔墙增大了斜井有效通风截面积,断面风速降低约5.3%,同时大幅减小通风斜井内的沿程阻力,仅为既有混凝土墙方案的17%左右;拱顶变形及二次衬砌混凝土结构受力均远低于结构安全限值。该技术克服了传统钢筋混凝土中隔墙的缺点,在满足隧道通风防灾要求的同时,改善了隧道施工环境,且施工工期可缩短为原方案的三分之一。     

Performance decay of stern bearing based on lubrication numerical model and state parameters北大核心CSCD

[目的]为了实现对船舶艉轴承润滑状态的监测和评估,提出一种结合润滑性能衰变模型和支持向量机(SVM)算法的艉轴承润滑性能评估方法。[方法]针对船舶艉轴承润滑状态难以监测和识别的问题,建立轴承润滑衰变数值模型,并运用实验数据对该模型进行验证,研究载荷、粗糙度和半径间隙对润滑状态衰变机理的影响。基于SVM算法,构建润滑状态分类器,通过网格搜索算法优化超参数,利用不同润滑状态的数据集进行训练,最后实现对艉轴承润滑状态的评估。[结果]结果显示,随着外部载荷、粗糙度和半径间隙的增大,轴承润滑状态恶化的临界速度增大,动压润滑工作范围减小,混合润滑工作范围增大;由仿真数据集对润滑状态识别模型的验证表明,所提的润滑状态识别方法准确率达96.88%。[结论]所提方法能监测轴承的润滑性能特征,有效识别轴承的润滑状态。     

铁路隧道钻爆法机械化修建设计关键技术北大核心CSCD

隧道钻爆法机械化修建方法是以全工序高效率大型机械配套为基础,用以解决复杂山区长大山岭隧道安全、优质、高效及经济等施工问题的一种技术方法。文章从隧道设计角度论述了钻爆法机械化修建面临的掌子面安全控制与洞身段变形控制两大关键挑战,并总结了以机械化全断面全地质型施工技术、掌子面稳定性评价方法、掌子面超前主动支护技术、掌子面超前支护“定量化”精准设计技术、低预应力锚杆主动支护技术、早高强喷混凝土主动支护技术、初期支护快速成环封闭技术、围岩形变压力计算方法等为核心的隧道钻爆法机械化修建设计关键技术,为推广应用隧道钻爆法机械化修建方法提供技术支撑。     

采用自动识别系统对水下输气管线、离岸平台和船舶检验评分的实时监测（英文）

The aim of this research is to develop an algorithm and application that can perform real-time monitoring of the safety operation of offshore platforms and subsea gas pipelines as well as determine the need for ship inspection using data obtained from automatic identification system(AIS). The research also focuses on the integration of shipping database,AIS data, and others to develop a prototype for designing a real-time monitoring system of offshore platforms and pipelines. A simple concept is used in the development of this prototype, which is achieved by using an overlaying map that outlines the coordinates of the offshore platform and subsea gas pipeline with the ship's coordinates(longitude/latitude) as detected by AIS. Using such information, we can then build an early warning system(EWS) relayed through short message service(SMS), email, or other means when the ship enters the restricted and exclusion zone of platforms and pipelines. The ship inspection system is developed by combining several attributes. Then, decision analysis software is employed to prioritize the vessel's four attributes, including ship age, ship type, classification, and flag state.Results show that the EWS can increase the safety level of offshore platforms and pipelines, as well as the efficient use of patrol boats in monitoring the safety of the facilities. Meanwhile, ship inspection enables the port to prioritize the ship to be inspected in accordance with the priority ranking inspection score.     

Nonlinear pricing of taxi services

This paper examines the effects of nonlinear fare structures in taxi markets using an extended taxi model with an explicit consideration of perceived profitability. The expected profit, defined as the profit per unit time (inclusive of both occupied and vacant taxi times), that a taxi driver expects to receive from picking up a customer in a particular zone or location, has great impact on the taxi driver’s choice of location in the search for customers. The fare structure directly governs the profitability of taxi rides of different distances originating from different locations. With these explicit considerations, the extended model is intended to look into the market effects of adopting a nonlinear fare structure with declining incremental charges. The proposed nonlinear fare structure could help restore a level-playing field for taxi operators whose businesses have been affected by some taxi drivers who resort to practices such as offering fare discounts or accepting requests for discounted fares from passengers for long-haul trips. Analysis of sensitivity of social welfare and profit gain as well as taxi/customer wait/search times is conducted with respect to the parameters in the nonlinear fare structure for the Hong Kong taxi market, and Pareto-improving nonlinear fare amendments are identified that neither disadvantage any customer nor reduce the taxi operators’ profits.     

Estimating spatial interdependence in automobile type choice with survey data

In this article, we show that vehicle type ownership is spatially dependent at both the regional and household-level even after controlling for income and population density. We discuss reasons for the existence of spatial effects in vehicle ownership, and note potential implications for policymakers. Our results point to the importance of spatial relationships in transportation research and highlight the hazards of ignoring their role in affecting transportation outcomes. For example, if vehicle type choice is affected by neighborhood spillovers, agencies that regulate traffic flow and road safety could tailor their choice projections and policy tools to account for such interdependence.     

A robust,data-driven methodology for real-world driving cycle development

This paper develops a robust, data-driven Markov Chain method to capture real-world behaviour in a driving cycle without deconstructing the raw velocity–time sequence. The accuracy of the driving cycles developed using this method was assessed on nine metrics as a function of the number of velocity states, driving cycle length and number of Markov repetitions. The road grade was introduced using vehicle specific power and a velocity penalty. The method was demonstrated on a corpus of 1180 km from a trial of electric scooters. The accuracies of the candidate driving cycles depended most strongly on the number of Markov repetitions. The best driving cycle used 135 velocity modes, was 500 s and captured the corpus behaviour to within 5% after 1,000,000 Markov repetitions. In general, the best driving cycle reproduced the corpus behaviour better when road grade was included.     

Solution for failure analysis of automotive axle knuckle pull-out

A completely safe engineering solution to the automotive assembly line knuckle ball-joint pull-out problem is achieved using failure analysis based on the “Design of Experiment” (DOE) method. During use, some ball-joints move in their housings or come loose under heavy loads. The purpose of this study is to determine critical production parameters that will eliminate this failure. In this research, the knuckle-ball-joint pull-out problem is examined, and knuckle housing and ball-joint outer diameter limits are re-defined. Four levels of interference between knuckle and ball-joint diameters and 2 levels of knuckle thickness are specified. Experiments are repeated five times using General Variance Analysis. Required pull-out force is determined, and necessary interference is found. New knuckle housing and ball-joint diameters, based on recommended interference values, are determined. It is also found that thickness of knuckle boss does not affect the results. Therefore, the design is unchanged in this region and this reduces costs.     

Performance evaluations of LED headlamps

Due to rapid progress in LED (Light Emitting Diode) technology, LEDs have become increasingly prevalent in applications to automotive lighting. This paper studies recent trends of LED headlamps along with various experiments regarding photometric characteristics, glare, and visibility. Experimental results are compared to those of halogen and HID (high intensity discharge) headlamps. LED headlamps are found to be still inferior to conventional headlamps with respect to glare. However, many properties of LED headlamps (luminous intensity, beam width, energy efficiency, and design) are competitive with halogen and HID headlamps. The findings in this investigation will henceforth be reported to the Korean Motor Vehicle Safety Standard (KMVSS).     

Transport terminal design and passenger orientation

The objective of the internal design of a transport terminal is to minimize the disorientation and confusion of a passenger as he arrives at the terminal and desires to move towards the destination without undue loss of time. The experience of India however shows that most of the rail, bus and air terminals leave much to be desired from the human orientation point of view. To measure the passenger orientation and to enable evaluation of the terminal design an easily tractable quantitative method has recently been evolved. This paper attempts to apply it to two rail terminals in Bombay and to compute some indices to serve as criteria for determining the level of service and suggest directions for improvement.