Experimental investigation of the valvetrain friction in actual engine operation conditions

Recently, the demands for improved fuel economy have been continually rising because of environmental protection policies, legislative pressures on emissions and increases in the price of oil. Reducing the friction power loss in a production engine may be regarded as one of the most effective technologies for improving fuel economy because the technology is cost effective and applicable to a great number of vehicles. This paper describes attempts to measure the torque needed to drive a camshaft and to examine the sources of the torque fluctuations in order to analyze the friction in valvetrains. The measurements were performed through a cam sprocket-type torquemeter, which was able to measure the torque of the valvetrain under actual engine operating conditions. In the cam torque measured, the fluctuations were mainly dependent on the primary oscillations caused by cam events and the secondary oscillations caused by the valvetrain natural frequency. The range of the fluctuations became greater at high speed because of the inertial mass. The resulting FMEP (friction mean effective pressure) of the valvetrain decreased, and the effective peak tension increased with an increase in the engine speed.     

Modeling stochastic perception error in the mean-excess traffic equilibrium model

In this paper, we extend the α-reliable mean-excess traffic equilibrium (METE) model of Chen and Zhou (Transportation Research Part B 44(4), 2010, 493-513) by explicitly modeling the stochastic perception errors within the travelers’ route choice decision processes. In the METE model, each traveler not only considers a travel time budget for ensuring on-time arrival at a confidence level α, but also accounts for the impact of encountering worse travel times in the (1 − α) quantile of the distribution tail. Furthermore, due to the imperfect knowledge of the travel time variability particularly in congested networks without advanced traveler information systems, the travelers’ route choice decisions are based on the perceived travel time distribution rather than the actual travel time distribution. In order to compute the perceived mean-excess travel time, an approximation method based on moment analysis is developed. It involves using the conditional moment generation function to derive the perceived link travel time, the Cornish-Fisher Asymptotic Expansion to estimate the perceived travel time budget, and the Acerbi and Tasche Approximation to estimate the perceived mean-excess travel time. The proposed stochastic mean-excess traffic equilibrium (SMETE) model is formulated as a variational inequality (VI) problem, and solved by a route-based solution algorithm with the use of the modified alternating direction method. Numerical examples are also provided to illustrate the application of the proposed SMETE model and solution method.     

Global optimization method for mixed transportation network design problem: A mixed-integer linear programming approach

This paper proposes a global optimization algorithm for solving a mixed (continuous/discrete) transportation network design problem (MNDP), which is generally expressed as a mathematical programming with equilibrium constraint (MPEC). The upper level of the MNDP aims to optimize the network performance via both expansion of existing links and addition of new candidate links, whereas the lower level is a traditional Wardrop user equilibrium (UE) problem. In this paper, we first formulate the UE condition as a variational inequality (VI) problem, which is defined from a finite number of extreme points of a link-flow feasible region. The MNDP is approximated as a piecewise-linear programming (P-LP) problem, which is then transformed into a mixed-integer linear programming (MILP) problem. A global optimization algorithm based on a cutting constraint method is developed for solving the MILP problem. Numerical examples are given to demonstrate the efficiency of the proposed method and to compare the results with alternative algorithms reported in the literature.     

Road transport and climate change: Stepping off the greenhouse gas

Transport is Australia’s third largest and second fastest growing source of greenhouse gas (GHG) emissions. The road transport sector makes up 88% of total transport emissions and the projected emissions increase from 1990 to 2020 is 64%. Achieving prospective emission reduction targets will pose major challenges for the road transport sector. This paper investigates two targets for reducing Australian road transport greenhouse gas emissions, and what they might mean for the sector: emissions in 2020 being 20% below 2000 levels; and emissions in 2050 being 80% below 2000 levels. Six ways in which emissions might be reduced to achieve these targets are considered. The analysis suggests that major behavioural and technological changes will be required to deliver significant emission reductions, with very substantial reductions in vehicle emission intensity being absolutely vital to making major inroads in road transport GHG emissions.     

Transport policy for London in 2001 The case for an integrated approach

The paper reports the results of a series of studies conducted to enable the London Planning Advisory Committee to provide advice on strategic transport policy for London. The analytical approach combined the use of an area-based, multi-modal strategic model (LAM) and professional judgment. The performance of LAM as a basis for providing rapid advice on complex issues in transport policy is assessed.The resulting policy advice advocated a coherent approach, involving new infrastructure, particularly for rail; improved management of the road and public transport networks; the use of subsidy to enhance public transport service levels; and road user charges to reduce the impact of private vehicles on congestion and the environment. Road user charges emerged as the pivotal issue in the policy; the paper discusses their role, and the questions which still need to be resolved before they can be implemented.The main message of the study is that no one element of transport policy can tackle London's problems alone; an integrated policy in which infrastructure provision, management and pricing are used to complement one another is shown to be far more effective.     

Port pricing: a cost axiomatic approach

The earlier port pricing literature argued that port prices should be based uponk marginal cost pricing. However, recent literature suggests that a conflicts would arise between marginal cost pricing and full cost recovery at ports. Further, problems arise in determining or estimating marginal costs. A price structure that addresses the problems of port marginal cost pricing is cost axiomatic pricing, given the goals, objectives and constraints of ports. Fairness and cost efficiency cost axioms for ports are considered. A methodology for determining cost axiomatic prices for a marine container terminal is presented.     

ICE列车的制动管理

ICE(R)列车制动管理的重点是:由司机室中完全相同的操作接口统一控制列车制动的重要功能,并协调功率特性全然不同的制动力资源.对工业部门和铁路部门的研制者提出的苛刻要求是,3种完全可调的制动系统(包括在ICE列车上首次批量使用的线性涡流制动)在所有工作点上以及故障情况时能达到最佳利用制动能量且磨损最小.     

CD_4~( ) EFFECTOR CELLS DEFAULT TO THE TH2 PATHWAY IN INTERFERONγ-DEFICIENT

ＣＤ_４~（＋）ＥＦＦＥＣＴＯＲＣＥＬＬＳＤＥＦＡＵＬＴＴＯＴＨＥＴＨ２ＰＡＴＨＷＡＹＩＮＩＮＴＥＲＦＥＲＯＮγ－ＤＥＦＩＣＩＥＮＴＭＩＣＥＩＮＦＥＣＴＥＤＷＩＴＨ　ＬＥＩＳＨＭＡＮＩＡ　ＭＡＪＯＲＷａｎｇＺｈｉ＇ｅｎ；ＳｔｅｖｅｎＬ．Ｒｅｉｎｅｒ，Ｚ...     

Optimization of tunnel tolls in land use and transport planning

The task of transport planning is to determine cost-effective methods of providing and improving mobility, which can include minimizing traffic congestion. A cost-effective solution to transport problems should consist of a land use pattern, a transport system an a set of road pricing policies that together bring demand and supply into balance in an efficient and equitable way. The conventional approach aimed to produce comprehensive, long-term plans for land use and transport in considerable detail, but tended to ignore the role of road pricing policy, thus ending up with solutions that might not be efficient or economical. This feature of sub-optimal road pricing policy is accentuated by the overall growth in car use, which has generated problems with the efficient use of road space. This paper presents a computer analysis system (or model) which will enable the analysis of coordinated tunnel toll pricing policies by optimising an “objective function” while satisfying the associated and other constraints. The possibility of integrating the optimal road pricing policies in the land use and transport planning are discussed. A case study based on Hong Kong data demonstrates the efficiency of optimizing tolls on two of the three harbour crossing tunnels in Hong Kong.     

Probabilistic Fatigue Failure Analysis of a Railroad Freight Car

The critical components of railroad fraight cars are subjected to fluctuating stresses and, therefore, vulnerable to fatigue damage. These fluctuating stresses result from different motions of the car when it travels along a track and is subjected to various track irregularities. Both the track irregularities and corresponding motions are highly random. Therefore, the fatigue damage can only be determined by means of a percentage probability level. This paper describes a probability-based method for evaluating fatigue damage in a freight car. The effect of uncertain boundary conditions for the car in the calculations of fatigue damage is also discussed. The applications of the method to carbody design and assessment of fatigue life are also explained