Construction Risk Management for Deep Excavation Adjacent to In operation Bored Tunnels

营运中的盾构隧道在邻近施工时周围地盘的应力可能因扰动而重新分布,使得盾构隧道暴露在因变形或位移衍生的结构损坏或营运中断等高风险下。为降低相关风险发生的可能性或后果的严重性,高雄计划将高雄车站段地下化工程捷运-R11永久站施工纳入风险管理,通过风险辨识、分析、评估以及以监测、巡检及沟通为基础的风险追踪查核等手段执行风险管理。依本计划执行成果,位于基地两侧营运中的盾构隧道在永久站主体工程开挖施工期间,各项风险均受到妥善的追踪、管控及处置。     

Prediction of wave parameters by using fuzzy inference system and the parametric models along the south coasts of the Black Sea

Forecasting of sea-state characteristics has a great importance in coastal and ocean engineering studies. Therefore, the purpose of this study was to investigate performances of Adaptive-Network-Based Fuzzy Inference System (ANFIS) and several parametric methods in the Black Sea. For this purpose, different fuzzy models with different input combinations were developed for two different wind data sources (TSMS and ECMWF) at two offshore buoy stations. It also aimed to apply several approaches to event-based data sets for wave predictions. Generally, in literature the tendency is to use time series data for wave predictions. In this kind of prediction approach, lagged time series data are taken as inputs and current or future variables are taken as output. In this study, event-based data for each independent storm were extracted from time series data. Simultaneous or concurrent data of wind speed, blowing duration, fetch length and wave characteristics were detected for each single storm. These event data were then used to set up models. The hindcast results were validated with significant wave height and mean wave period data recorded in Hopa and Sinop buoy stations. The performance of developed fuzzy models were also compared with that of four different parametric methods (Wilson, SPM, Jonswap, and CEM methods) applied for two wind data sources at both buoy stations. Finally, it was determined that in the prediction of both wave parameters (H _s and T _z) the ANFIS models (R = 0.66, squared correlation coefficient, and MAE = 0.37 m, mean absolute error, for the best model in prediction of H _s) were more accurate than the parametric methods (R = 0.63 and MAE = 0.75 m for the best model in prediction of H _s).     

飞机降落冲击荷载作用下高铁隧道动力响应及疲劳损伤研究北大核心CSCD

针对运营期高铁隧道衬砌结构在飞机降落冲击荷载作用下的动力响应规律及疲劳损伤问题,以成自高铁下穿天府机场东二跑道区间隧道为工程背景,采用有限元分析的方法研究隧道动力响应及疲劳损伤规律。结果表明:B747-400型飞机在粗暴着陆后0.05 s时刻动力载荷达到最大值,约为500 kN;在单次粗暴着陆工况下,拱顶位移和受力最大,位移最大峰值为1.58 mm,拉应力最大峰值为437.79 kPa,压应力最大峰值为556.24 kPa,衬砌结构未出现塑性损伤;飞机荷载长期作用下,随着循环次数的增加,结构损伤部位和程度也随之增加,拱顶损伤最突出,其次为边墙,隧道衬砌在上方飞机长期粗暴着陆作用下的疲劳寿命大致为25 a。     

An exploratory analysis of joint-activity participation characteristics using the American time use survey

This paper presents a detailed exploratory analysis of joint activity participation characteristics using the American Time Use Survey (ATUS). As a very large nationwide survey that explicitly elicited information on both household and non-household companions for each activity episode, the ATUS is ideally suited for this analysis. Several intuitive and interesting results are obtained. Joint episodes are found to be of longer durations, significantly likely to take place at the residence of other people, and often confined to certain time periods of the weekday. In addition, important differences in these characteristics are also observed based on activity purpose, companion type, and the day of the week. These findings are intended to provide the basis for the justification of detailed collection of joint activity–travel participation information in household activity–travel surveys, and also as a stimulant for further empirical analysis and modeling of joint activity participation behavior.

Vehicle detection system design based on stereo vision sensors

Vehicle detection is a crucial issue for driver assistance system as well as for autonomous vehicle guidance function and it has to be performed with high reliability to avoid any potential collision. The vision-based vehicle detection systems are regarded promising for this purpose because they require little infrastructure on a highway. However, the feasibility of these systems in passenger car requires accurate and robust sensing performance. In this paper, a vehicle detection system using stereo vision sensors is developed. This system utilizes feature extraction, epipoplar constraint and feature matching in order to robustly detect the initial corresponding pairs. The proposed system can detect a leading vehicle in front and can estimate its position parameters such as the distance and heading angle. After the initial detection, the system executes the tracking algorithm for the vehicles in the lane. The proposed vehicle detection system is implemented on a passenger car and its performances are verified experimentally.     

Analysis of a regenerative braking system for Hybrid Electric Vehicles using an Electro-Mechanical Brake

The regenerative braking system of the Hybrid Electric Vehicle (HEV) is a key technology that can improve fuel efficiency by 20∼50%, depending on motor size. In the regenerative braking system, the electronically controlled brake subsystem that directs the braking forces into four wheels independently is indispensable. This technology is currently found in the Electronic Stability Program (ESP) and in Vehicle Dynamic Control (VDC). As braking technologies progress toward brake-by-wire systems, the development of Electro-Mechanical Brake (EMB) systems will be very important in the improvement of both fuel consumption and vehicle safety. This paper investigates the modeling and simulation of EMB systems for HEVs. The HEV powertrain was modeled to include the internal combustion engine, electric motor, battery and transmission. The performance simulation for the regenerative braking system of the HEV was performed using MATLAB/Simulink. The control performance of the EMB system was evaluated via the simulation of the regenerative braking of the HEV during various driving conditions.     

Belt routing and safety assessment through computer simulation

Most of the research on safety belt systems has involved crash simulation that only considered a dynamic human model. However, belt routing analysis, usually known as comfort level estimation, is also an important factor in safety belt design, considering that serious injuries of the abdominal region result from the infiltration of a belt into the neck or the chest. Thus, safety belt evaluations using kinematic human models are also needed. In this paper, a belt fit simulation method is suggested. Using the proposed process, both comfort and safety analyses can be performed under the same conditions continuously, and thus the safety belt design parameters, such as the location of anchor points, dummy posture and etc., can be evaluated. In conclusion, this computer process enables a belt system design to reduce injuries.     

Performance of air conditioners with a gas-liquid separation condenser and one-tank laminated evaporator

In this study, a parallel flow condenser and laminated evaporator for an automotive air-conditioning system were modified to improve performance. Gas-liquid separation type condensers, in which the condenser and receiver drier are integrated, and one-tank laminated type evaporators were developed, and their performances were investigated experimentally using HFC-134a. Heat transfer characteristics in the condenser are examined by means of air temperature, air velocity entering the condenser and inlet pressure of the refrigerant; heat transfer characteristics in the evaporator are examined by means of air temperature, relative humidity, flow rate of air, outlet pressure of refrigerant and superheat. Pressure drops for both evaporator and condenser are also measured, and correlations for pressure drop are derived for the condenser and evaporator, respectively. Air velocity and mass flow rate of the refrigerant have a significant effect on the overall heat transfer coefficient, and flow pass is not significantly influenced by the cooling capacity of the condenser. The overall heat transfer coefficient of the evaporator increases as air flow rate, air temperature and relative humidity increases.     

Grain refinement in bearing steels using a double-quenching heat-treatment process

A double-quenching (D/Q) process is proposed for heat-treating high carbon-chromium bearing steels to improve the fatigue properties through refinement of the microstructure. The new heat treatment method has two steps: The first step is a nitrocarburizing process that results in high surface hardness and lowers the transformation temperature. The second step is the same as in the conventional quenching process but can be conducted at a considerably lower temperature than in conventional quenching. The microstructure in the material that is caused by the D/Q heat treatment is much finer than in the conventional Q/T (quenching and tempering) process. In order to quantify the performance of the proposed heat-treatment process, various mechanical property tests are carried out. The rolling contact fatigue life of double-quenched bearing steels was eight times higher than in bearing steels that were treated by conventional Q/T.