Back-Calculation of Ground Stress Field and Rockburst Analysis for Wunvfeng Tunnel北大核心CSCD

Studying the in-situ stress distribution at a tunnel site is very important to determine surrounding rock characteristics, the engineering design and the construction scheme. By using the multiple linear regression method based on the least square algorithm, the initial geostress field is analyzed and the corresponding regression coefficients are obtained. The ground stress obtained from the proposed back analysis is reasonable and can meet the demands of the engineering applications. From the rockburst risk level distribution diagram, it is speculated that the Wunvfeng tunnel is in the high filed stress area. Field monitoring should be strengthened and emergency plans should be made to cope with the rockburst risks during the construction process. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

An activity-based approach of investigating travel behaviour of older people

The paper presents the results of an investigation on daily activity-travel scheduling behaviour of older people by using an advanced econometric model and a household travel survey, collected in the National Capital Region (NCR) of Canada in 2011. The activity-travel scheduling model considers a dynamic time–space constrained scheduling process. The key contribution of the paper is to reveal daily activity-travel scheduling behaviour through a comprehensive econometric framework. The resulting empirical model reveals many behavioural details. These include the role that income plays in moderating out-of-home time expenditure choices of older people. Older people in the highest and lowest income categories tend to have lower variations in time expenditure choices than those in middle-income categories. Overall, the time expenditure choices become more stable with increasing age, indicating that longer activity durations and lower activity frequency become more prevalent with increasing age. Daily activity type and location choices reveal a clear random utility-maximizing rational behaviour of older people. It is clear that increasing spatial accessibility to various activity locations is a crucial factor in defining daily out-of-home activity participation of older people. It is also clear that the diversity of out-of-home activity type choices reduces with increasing age and older people are more sensitive to auto travel time than to transit or non-motorized travel time.     

Isolating high-priority metro and feeder bus transfers using smart card data

Fixed-rail metro (or ‘subway’) infrastructure is generally unable to provide access to all parts of the city grid. Consequently, feeder bus lines are an integral component of urban mass transit systems. While passengers prefer a seamless transfer between these two distinct transportation services, each service’s operations are subject to a different set of factors that contribute to metro-bus transfer delay. Previous attempts to understand transfer delay were limited by the availability of tools to measure the time and cost associated with passengers’ transfer experience. This paper uses data from smart card systems, an emerging technology that automatically collects passenger trip data, to understand transfer delay. The primary objective of this study is to use smart card data to derive a reproducible methodology that isolates high priority transfer points between the metro system and its feeder-bus systems. The paper outlines a methodology to identify transfer transactions in the smart card dataset, estimate bus headways without the aid of geographic location information, estimate three components of the total transfer time (walking time, waiting time, and delay time), and isolate high-priority transfer pairs. The paper uses smart card data from Nanjing, China as a case study. The results isolate eight high priority metro-bus transfer pairs in the Nanjing metro system and finally, offers several targeted measures to improve transfer efficiency.     

Evaluating air emission inventories and indicators from cruise vessels at ports

This paper provides an estimation of air emissions (CO₂, NO_X, SO_X and PM) released by cruise vessels at the port level. The methodology is based on the “full bottom-up” approach and starts by evaluating the fuel consumed by each vessel on the basis of its individual port activities (manoeuvring, berthing and hoteling). The Port of Barcelona was selected as the site at which to perform the analysis, in which 125 calls of 30 cruise vessels were monitored. Real-time data from the automatic identification system (AIS), factor emissions from engine certificates and vessel characteristics from IHS Sea-web database were also collected for the analysis. The research findings show that the most appropriate indicators are inventory emissions per “port-time gross tonnage”, “port-time passenger” and “port time”. These emission indicators improve our understanding of cruise emissions and will facilitate the work that aims to estimate reliably and quickly the in-port ship emission inventories of cruise ports.     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

A study of vibration and vibration control of ship structures

This paper examines the vibration characteristics and vibration control of complex ship structures. It is shown that input mobilities of a ship structure at engine supports, due to out-of-plane force or bending moment excitations, are governed by the flexural stiffness of the engine supports. The frequency averaged input mobilities of the ship structure, due to such excitations, can be represented by those of the corresponding infinite beam. The torsional moment input mobility at the engine support can be estimated from the torsional response of the engine bed section under direct excitation. It is found that the inclusion of ship hull and deck plates in the ship structure model has little effect on the frequency-averaged response of the ship structure. This study also shows that vibration propagation in complex ship structures at low frequencies can be attenuated by imposing irregularities to the ring frame locations in ships. Vibration responses of ship structures due to machinery excitations at higher frequencies can be controlled by structural modifications of the local supporting structures such as engine beds in ships.     

Rapid first-stage tests of on-ship infection

Protection against on-ship infectious disease—whether due to mishap or to harmful purpose—faces special situational problems. Sometimes, when infection levels on board have reached threshold levels, emergency actions are required. Often, the most thorough strategies for responding to threat are not feasible. A rapid first-stage test (RFT) is a fast, minimally invasive procedure used to rule out from possible infection a large percentage of an infection-threatened group. Prevention and control of on-ship infection need to combine various interconnected tactics. When timely criterion tests are not possible, the medical team must adopt fast alternative measures. The methods used to summarize protection against on-ship infectious agents included a scientific literature review and a web search. The fields of the review were maritime, health, and technology sources. Special attention was paid to material dealing with risks and threats of on-ship penetration by infectious agents, on-ship infection prevalence thresholds, and rapid diagnostic screens. The Bayes rule and the law of large numbers were applied to the analysis, for large on-ship populations, of RFT indications of crossing of an infection prevalence threshold. The increasing risk of serious on-ship infection—either accidental or purposeful—calls for a multi-layered protection approach. RFTs are a key part of the outer layer of such a defense. Well-designed and well-administered RFTs provide several advantages for defense against on-ship infection: low-cost, non-invasive, fast, and focuses on a drastically smaller number of infection possibilities.     

Motorway signals and the detection of incidents

A mathematical model of automobile trip tours is presented. Within a framework of eight common restrictions on automobile trip making, all travel behavior is assumed random and all of the ways in which tours can be arranged are assumed equally likely. Three probability distributions are derived from the model: (1) the probability that a household makes a given number of tours in a day; (2) the probability that a household makes a given number of trips in a day; and (3) the probability that a tour reaches a given number of destinations. It is shown that the model agrees with similar probability distributions generated from home‐interview data for Milwaukee.     

Characteristics of premium transit services that affect mode choice

This research seeks to improve the understanding of the full range of determinants for mode choice behavior and to offer practical solutions to practitioners on representing and distinguishing these characteristics in travel demand forecasting models. The principal findings were that the representation of awareness of transit services is significantly different than the underlying assumption of mode choice and forecasting models that there is perfect awareness and consideration of all modes. Furthermore, inclusion of non-traditional transit attributes and attitudes can improve mode choice models and reduce bias constants. Additional methods and analyses are necessary to bring these results into practice. The work is being conducted in two phases. This paper documents the results of Phase I, which included data collection for one case study city (Salt Lake City), research and analysis of non-traditional transit attributes in mode choice models, awareness of transit services, and recommendations for bringing these analyses into practice. Phase II will include data collection for two additional case study cities (Chicago and Charlotte) with minor modifications based on limitations identified in Phase I, additional analyses where Phase I results indicated a need, and a demonstration of the research in practice for at least one case study city.