Development of engine control using the in-cylinder pressure signal in a high speed direct injection diesel engine

Emission regulations are becoming more stringent and remain a principal issue for vehicle manufacturers. Many engine subsystems and control technologies have been introduced to meet the demands of these regulations. For diesel engines, combustion control is one of the most effective approaches for reducing not only engine exhaust emissions but also cylinder-by-cylinder variation. However, the high cost of pressure sensors and the complex engine head design for additional equipment present difficulties for manufacturers. In this paper, cylinder pressure-based engine control logic is introduced for a multi-cylinder high speed direct injection (HSDI) diesel engine. The time for 50% of the mass fraction to be burned (MFB50) and the IMEP are valuable for determining the combustion status. These two in-cylinder quantities are measured and applied to the engine control logic. Fuel injection timing is controlled to adjust the operating MFB50 to the target MFB50 using PID control logic, and the fuel injection quantity is controlled to adjust the measured IMEP to the desired IMEP. The control logic is demonstrated at steady state and during transient conditions and is applied to an NEDC mode test.     

Active noise control in a duct system based on a frequency-estimation algorithm and the FX-LMS algorithm

In this paper, an indirect feedback active noise control (ANC) scheme, based on the fundamental frequency-estimation method, is proposed for systems with multiple tonal noises. The engine noise consists of the harmonic components of the rotation of the crankshaft in the engine. When it is difficult to obtain reference signals, which are necessary for a feedforward ANC, conventional ANC algorithms do not work. In this paper, a new method is proposed to generate reference signals with estimated frequencies. The proposed algorithm consists of two parts: the frequency-estimation (FE) algorithm for the estimation of the fundamental frequency of the rotating machinery and then the conventional filtered-x LMS (FX-LMS) algorithm. In the second algorithm, the reference signal is generated using the fundamental frequency as estimated in the first algorithm. The FE algorithm uses a second-order adaptive notch filter, which is insensitive to impulse noise. In addition, the FE algorithm has good tracking capability and a lower variance of frequency-estimation error for a constant sinusoid signal and chirp signal. The performance of the proposed ANC method is verified through simulations and an experiment using a DSP board (DS-1104) inside a short duct.     

An Assessment of Coastal Development and Land Use Change Using the DPSIR Framework: Case Studies from the Eastern Cape,South Africa

Coastal areas are experiencing high levels of development, largely driven by a number of aesthetic and recreational factors, increased mobility, availability of disposable income for middle and upper income groups and the promise of job opportunities and improved economic well-being for lower income groups. As existing coastal urban nodes expand development “shifts” to less developed areas and places increasing pressure on the surrounding natural environment. This article considers the coastal zone of two municipalities in the Eastern Cape, South Africa, with similar environmental characteristics but disparate socioeconomic and governance histories. It identifies and integrates the drivers of development and land use change in the coastal zone of these municipalities by means of an adapted Driver-Pressure-State-Impact-Response (DPSIR) Framework. Development and land use change are driven by a combination of social, economic, and legislative factors that need to be considered for future management and planning in this unique dynamic system.     

Valuing Recreation and Amenities at San Diego County Beaches

Abstract

Policymakers and analysts concerned with coastal issues often need economic value information to evaluate policies that affect beach recreation. This paper presents economic values associated with beach recreation in San Diego County generated from a recreation demand model that explains a beach user's choice of which beach to visit. These include estimates of the economic values of a beach day, beach closures, and beach amenities.     

Characterization of Ship Traffic in Right Whale Critical Habitat

Collisions with ships are a significant threat to the endangered North Atlantic right whale. To reduce this threat, The National Oceanic and Atmospheric Administration's (NOAA) National Marine Fisheries Service (NMFS) and the U.S. Coast Guard (USCG) established the Mandatory Ship Reporting System (MSRS) in July 1999. Under this system, all commercial ships, 300 gross tons or greater, are required to report to a shore-based station when entering either of two areas surrounding designated critical habitat: one in waters off the northeastern United States and the other off the southeastern United States. Information reported to the system includes entry location, destination, intended route, and speed. Reporting ships receive an automated message indicating precautionary steps to be taken to avoid hitting whales. Ship tracks between sequential ship locations were estimated by using a geographic information system (GIS) and mapped to illustrate traffic patterns within the MSRS. In the northeast, 69% of all valid tracks transited right whale critical habitat areas. All but two southeastern tracks intersected critical habitat. “High-use” traffic corridors were identified within the system. The majority of ships (59%) traveled at speeds greater or equal to 14 kn, a reported speed at which large whales may be critically injured. This characterization provides a portrait of ship traffic in right whale aggregation areas that can be used to develop measures to reduce the threat of ship strikes to right whales.     

The determinants of maritime policy

The paper is to explore the relation between national economic development and the formulation of maritime policy. It collects and examines data from 30 maritime nations, and shows that maritime policy is determined by economic circumstance rather than the result of rational decision of policy makers. A general solution is produced for an optimum maritime policy under a given economic condition. The general solution can serve as a benchmark for future maritime policy making and research in general.     

A combined tramp ship routing,fleet deployment,and network design problem

In this paper, a tramp ship routing model of fleet deployment in a hub-and-spoke network is presented. This model simultaneously determines the selection of hubs, the assignment of spokes to hubs, the deployment of feeder-containerships as well as containership routing between spokes and spokes, hubs and spokes, and hubs and hubs. Even though some parts have been studied, this complex combination of shipping problems has never been addressed. Because the problem is NP-hard, a genetic algorithm (GA) with local search is proposed. In the algorithm, a cut-off procedure is applied to fleet deployment in a sub-route strategy. A number of randomly generated problem instances are solved by both a mathematical program and the GA with local search. A simple but realistic heuristic algorithm is also developed. Both the GA with local search and the heuristic algorithm are used to solve a number of real case instances. A comparison of the results shows the efficiency of the GA with local search. The developed model can be used as a route-decision support tool for shipping companies that provide long-haul shipping services in a hub-and-spoke network.     

耦合非线性三维海洋立管的边界控制(英文)

This paper presents a design of boundary controllers implemented at the top end for global stabilization of a marine riser in a three dimensional space under environmental loadings. Based on the energy approach, nonlinear partial differential equations of motion, including bending-bending and longitudinal-bending couplings for the risers are derived. The couplings cause mutual effects between the three independent directions in the riser’s motions, and make it difficult to minimize its vibrations. The Lyapunov direct method is employed to design the boundary controller. It is shown that the proposed boundary controllers can effectively reduce the riser’s vibration. Stability analysis of the closed-loop system is performed using the Lyapunov direct method. Numerical simulations illustrate the results.